(1/1)
001-01 / 20090511 / eg21_bhp4502ss.fm
• All specifications are subject to change without notice.
Thermal Print Heads
For Barcode and Label Printers
BHP4502SS
FEATURES
• Normal type with no heat history control type [SS type]
• New-BP protective layer with excellent abrasion resistance is
used.
APPLICATIONS
• Barcode and label printers
• Bank ATMs
•Amusements
• Ticket-vending machines
• POS terminals
PRODUCT SPECIFICATIONS
HEATING ELEMENT SPECIFICATIONS
DRIVE CONDITIONS
SHAPES AND DIMENSIONS
Number of heating elements (dots) 1024
Dot density
(dots/mm) 8
(DPI) 203
Length of heating element array
(effective)
(mm) 128
Heating element average resistance (Ω)800
Glaze type Partial glaze
Applied platen diameter (mm) ø20max.
Paper-feed speed (mm/sec) 100max.
Data transfer frequency (MHz) 5max.
Driver power supply (V) 4.75 to 5.25
128
(
Effective printing width
)
(
Heater line
)
136
140
Thermistor
(
24
)
Connector HIF3F-30PA-2.54DS
(
71
)(
HIROSE
)
30 30
5020
80
5.0
6.02max.
ø3 3×53-M3
Dimensions in mm
ø20
10
20
29.5
8.5
(
38
)
(
10
)(
3
)
4
-
1
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
Printronix 6800 Series User manual
-
Brady Bradyprinter 2461 User manual
-
Xerox I Class User manual
-
Datamax M-Class Mark II M-4206 User manual
-
Tally Genicom 6600 User manual
-
-
-
Fenix EPC1800 Operating instructions
-
-
Seiko Instruments DPU-30 User manual