VENTURE LIGHTING AC0003-D Installation guide

AC0003-D
Brand
VENTURE LIGHTING
Model
AC0003-D
Type
Installation guide

VENTURE LIGHTING AC0003-D is an LED power supply designed for recessed canopy fixtures in covered ceilings. It offers hands-free wiring for ease of installation, with a surge suppressor already included for added protection. The power supply can be connected to external AC power via conduit connector piping, ensuring a safe and reliable connection. It operates on a voltage range of 8-16V and provides a stable power output for LED fixtures. Its compact design allows for easy integration into the fixture's back housing, making it a suitable solution for retrofit lighting projects.

VENTURE LIGHTING AC0003-D is an LED power supply designed for recessed canopy fixtures in covered ceilings. It offers hands-free wiring for ease of installation, with a surge suppressor already included for added protection. The power supply can be connected to external AC power via conduit connector piping, ensuring a safe and reliable connection. It operates on a voltage range of 8-16V and provides a stable power output for LED fixtures. Its compact design allows for easy integration into the fixture's back housing, making it a suitable solution for retrofit lighting projects.

Installation Guide - Recessed Canopy Fixture
1
4
3
2
5
2.38
1.50
8.00
16.00
16.00
8.00
8.00
15.00
15.00
15.00
15.00
Vin
GREEN
BLACK
BLACK
WHITE
GREEN
WHITE
COM
GROUND
SURGE
SUPPRESSOR
LED
POWER
SUPPLY(S)
AC0003-D
© 2022 Venture Lighting International • Venture Lighting is a registered trademarks of Venture Lighting International.
(800) 451-2606
6675 Parkland Blvd., Suite 100
Solon, Ohio 44139 USA
E-mail: [email protected]
VentureLighting.com
dimensions shown in inches
dimensions shown in inches
WARNING: Before proceeding, read all instructions carefully to ensure proper and safe installation.
WARNING: Risk of fire or electrical shock.
WARNING: Disconnect power before installing or servicing.
WARNING: Ceiling - Mounted Recessed - Covered Ceiling Only
WARNING: Not intended for Petroleum Canopy Installation.
WARNING: All wiring to be performed per National Electrical Code and local code by qualified electrician.
Check to make sure the fixture consists of a recessed unit with power supply(s) mounted in the
back housing.
Prepare fixture for hands-free wiring:
1) Remove the cover shown in Figure 1 to gain
access to the electrical box with the line, neutral
and ground wires.
2) Use the knock out shown in Figure 3 to fit conduit
connector piping that supplies external AC power
to the fixture.
3) Locate a secure hanging point in ceiling opening for
the steel cable tether to hang fixture from for hands-
free wiring.
4) Make wiring connections between supply wiring and conduit connector piping that supplies
external AC power. Wire per National Electric Code and local code. Refer to the electrical
diagram for further information.
5) Connect the incoming electrical wires to the set of power wires on the LED power supply(s).
The surge suppressor is already included in the fixture.
Recessed Mount Installation:
6) Prepare covered ceiling opening. Locate position of ceiling opening where enclosure will
accomodate a 16 inch x 16 inch retrofit fixture. Position the fixture flush with the ceiling and
secure using appropriate fasteners (not supplied). Four (4) drill points are provided on the
face of the fixture.
Guide d'installation - encastré Canopy Fixture
1
4
3
2
5
2.38
1.50
8.00
16.00
16.00
8.00
8.00
15.00
15.00
15.00
15.00
Vin
VERT
NOIR
NOIR
BLANC
VERT
BLANC
COM
SOL
SURGE
SUPPRESSOR
ALIMENTATION
DEL (S)
AC0003-D
© 2022 Venture Lighting International • Venture Lighting is a registered trademarks of Venture Lighting International.
(800) 451-2606
6675 Parkland Blvd., Suite 100
Solon, Ohio 44139 USA
E-mail: [email protected]
VentureLighting.com
dimensions en pouces
dimensions en pouces
AVERTISSEMENT: Avant de commencer, lisez attentivement toutes les instructions pour assurer
une installation correcte et sûre.
AVERTISSEMENT: Risque d'incendie ou de choc électrique.
AVERTISSEMENT: Débranchez l'alimentation avant l'installation ou l'entretien.
AVERTISSEMENT: Plafond - Encastré - Plafond couvert seulement
AVERTISSEMENT: Non destiné à des Petroleum Canopy installation.
AVERTISSEMENT: Tout le câblage à réaliser par National Electrical Code et le code local par un
électricien qualifié.
Assurez-vous d’luminaire se compose d’une unité
encastré avec alimentation(s) monté dans le boîtier
arrière.
Préparer luminaire pour les mains câblage libre:
1) Retirez le couvercle montré à la figure 1 à
accéder à la boîte électrique avec le fils ligne,
neutre et de terre.
2) Utilisez les assommer le montre la figure 3 à
ajustement conduit connecteur tuyauterie fournitures
une alimentation secteur externe à l’appareil.
3) Trouver un point de suspension sécurisé dans le
plafond ouverture de l’attache de câble d'acier pour
accrocher projecteur du câblage mains-libres.
4) Effectuer les raccordements entre l’offre câblage et connecteur de conduit tuyauterie fournit
une alimentation secteur externe fil par National Electric Code et le code local. Reportez-vous
au schéma électrique pour de plus amples information.
5) Connecter les fils électriques entrants à l'ensemble des câbles d'alimentation de la puissance
LED alimentation(s). Le suppresseur de surtension est déjà inclus dans le luminaire.
Encastré Installation au:
6) Préparer l'ouverture du plafond couvert. Repérez la position de l'ouverture du plafond où
enceinte va accueillir un x 16 pouces rénovation luminaire 16 pouces. Placez la chasse d’eau
de fixation avec le plafond et sécurisées à l’aide des fixations appropriées (non fourni).
Quatre (4) points de forage sont prévus sur la face de l’appareil.
  • Page 1 1
  • Page 2 2

VENTURE LIGHTING AC0003-D Installation guide

AC0003-D
Brand
VENTURE LIGHTING
Model
AC0003-D
Type
Installation guide

VENTURE LIGHTING AC0003-D is an LED power supply designed for recessed canopy fixtures in covered ceilings. It offers hands-free wiring for ease of installation, with a surge suppressor already included for added protection. The power supply can be connected to external AC power via conduit connector piping, ensuring a safe and reliable connection. It operates on a voltage range of 8-16V and provides a stable power output for LED fixtures. Its compact design allows for easy integration into the fixture's back housing, making it a suitable solution for retrofit lighting projects.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages

Related papers

Other documents