LED PORTABLE LIGHT
Warning / Avertissement
MIN 75°C SUPPLY CONDUCTOR
THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE
INSTALLATION CODE BY A PERSON FAMILIAR WITH THE CONSTRUCTION AND
OPERATION OF THE PRODUCT AND THE HAZARDS INVOLVED.
LES FILS D’ALIMENTATION 75°C MIN
CE PRODUIT DOIT ÊTRE INSTALLÉ SELON LE CODE D’INSTALLATION PERTINENT,
PAR UNE PERSONNE QUI CONNAÎT BIEN LE PRODUIT ET SON FONCTIONNEMENT
AINSI QUE LES RISQUES INHÉRENTS.
9
LED PORTABLE LIGHT
Step 1: Open the battery cover with a screwdriver and remove the silicone sleeve,
See Figure 1. Step 2: Remove the silicone sleeve, see Figure 2.
Step 3: Install Four AA rechargeable batteries, see Figure 3.
Step 4: Install the silicone sleeve and battery cover successively, see Figure 4
Note:
Installation Steps
1. This product needs to use with Four AA rechargeable batteries,LR03 1.3V batteries.
2.
3. The battery may discharge completely after 12 months even if not in use.