2. Maestro
  3. HRN-RR-HD2
HRN-RR-HD2

Maestro HRN-RR-HD2 Installation guide

  • Hello! I've analyzed the provided user guide for the iDatalink Maestro RR and RR2 radio replacement interfaces and HD2 installation harness. This guide provides detailed instructions on installing the interface and harness for several Harley-Davidson motorcycle models, including how to retain handlebar controls and connect aftermarket radios. I am ready to help you understand the installation process, troubleshoot issues, and answer any related questions you might have about the products
  • What should I do if the sound is very quiet?
    What if the light on the Maestro module blinks when a button is pressed, but the radio does not respond?
    What does it mean if the light on the Maestro flashes RED ONCE?
    How do I reset the Maestro RR module?
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certifi ed technician. Logos and trademarks used here in
are the properties of their respective owners.
WARNING
Pressing the printer icon or “quick printing” this document will print
all of the guides in this compilation.
Open the Bookmarks menu and find your vehicle OR scroll
down until you find the install guide for your vehicle.
Print only the pages for your vehicle using the advanced
options in the Print menu.
Install your Maestro RR according to the guide for your vehicle.
HOW TO USE THIS INSTALL GUIDE
1
2
3
SELECT VEHICLE
PRINT PAGES NEEDED
2014-2020
Harley-DaviDson electra GliDe
INSTALL GUIDE
RETAINS HANDLE BAR CONTROLS
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here
in are the properties of their respective owners.
PRODUCTS REQUIRED
iDatalink Maestro RR or RR2 Radio Replacement Interface
iDatalink Maestro HD2 Installation Harness
Non-iDatalink Compatible Radio
PROGRAMMED FIRMWARE
ADS-RR(SR)-HD02-AS
ADDITIONAL RESOURCES
Maestro RR2 Programmable Outputs Guide
OR
OPTIONAL ACCESSORIES
ACC-RR-WPB
ACC-ABP-HD2
ACC-USB-HD2
ADS-RR(SR)-HD02-AS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2021 2
Harley-DaviDson electra GliDe 2014-2020
NEED HELP?
TABLE OF CONTENTS
Installation Instructions 3
Wiring Diagram 4
Troubleshooting Table 5
WELCOME
Congratulations on the purchase
of your iDatalink Maestro RR Radio
replacement solution. You are
now a few simple steps away from
enjoying your new car radio with
enhanced features.
Before starting your installation,
please ensure that your iDatalink
Maestro module is programmed
with the correct fi rmware for your
vehicle and that you carefully review
the install guide.
Please note that Maestro RR will
only retain functionalities that
were originally available in the
vehicle.
1 866 427-2999
maestro.idatalink.com/support
www.12voltdata.com/forum
[email protected]
ADS-RR(SR)-HD02-AS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2021 3
Harley-DaviDson electra GliDe 2014-2020
INSTALLATION INSTRUCTIONS
STEP 1
• Unbox the aftermarket radio and locate its main harness.
• Remove the factory radio.
• Cut and remove the RCA junction connectors. Connect
every wire from the aftermarket radio main harness to the
HD2 T-harness and match the wire functions.
STEP 2
• Connect the HD2 T-harness to the vehicle.
STEP 3
• Plug the aftermarket radio harnesses into the aftermarket
radio.
• Connect the steering wheel control cable to the
aftermarket radio.
STEP 4
• Connect all the harnesses to the Maestro RR module then
test your installation.
NOTE: Because the vehicle is not equipped with
illumination or reverse gear signals, these outputs can be
triggered manually by confi guring them as steering wheel
control commands during the fl ashing process in Weblink.
1
ADS-RR(SR)-HD02-AS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2021 4
Harley-DaviDson electra GliDe 2014-2020
1
MAIN
HARNESS
HD2 T-HARNESS
STEP 3
STEP 4
MAESTRO RR MODULE
WIRING DIAGRAM
WIRES FROM
VEHICLE
FACTORY RADIO HARNESS
STEP 2
AUDIO
CABLE
NOT REQUIRED
DATA
CABLE
CONNECT TO
AFTERMARKET RADIO
STEERING WHEEL
CONTROL CABLE
CUT AND REMOVE
THE RCA JACKS
STEP 1
WHITE - LF SPEAKER (+)
WHITE/BLACK - LF SPEAKER (-)
GRAY - RF SPEAKER (+)
GRAY/BLACK - RF SPEAKER (-)
GREEN - LR SPEAKER (+)
GREEN/BLACK - LR SPEAKER (-)
PURPLE/BLACK - RR SPEAKER (-)
YELLOW - 12V (+)
BLACK - GROUND
RED - ACCESSORY (+)
BLUE/WHITE - AMP. TURN ON (+)
PURPLE - RR SPEAKER (+)
ORANGE - PARKING LIGHT (+)
PURPLE/WHITE - REVERSE LIGHT (+)
LTGREEN - E-BRAKE (-)
PINK - VEHICLE SPEED
SEE AFTERMARKET
RADIO GUIDE
FOR WIRE
COLORS
ADS-RR(SR)-HD02-AS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2021 5
Harley-DaviDson electra GliDe 2014-2020
TROUBLESHOOTING TABLE
PROBLEM SOLUTION
Sound is very quiet. Cut and remove the RCA connectors and connect the wires to the speaker
outputs of the radio.
When a button on the handle bar is pressed, the light on the Maestro module
blinks but the radio does not respond.
Ensure the blue 4-pin steering wheel control cable is connected between the
maestro and the radio (the radio will use either the 3.5mm jack or the Blue/
Yellow wire, not both).
Refer to radio’s owners manual to verifi e if the radio has this function:
Steering Wheel Control (ON/OFF) : choose ON.
or
Steering Wheel Control (Custom/Preset): choose Preset
The light on the Maestro is fl ashing RED ONCE. There is no fi rmware on the module; fl ash the RR module.
MAESTRO RR RESET PROCEDURE:
Turn the key to the OFF position, then disconnect all connectors from the module.
Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may
take up to 10 seconds).
Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds to show the reset was successful.
TECHNICAL ASSISTANCE
Phone: 1-866-427-2999
Email: maestr[email protected]
Web: maestro.idatalink.com/support add www.12voltdata.com/forum/
IMPORTANT: To ensure proper operation, the aftermarket radio needs to have the latest fi rmware from the manufacturer. Please visit the radio
manufacturer’s website and look for any updates pertaining to your radio.
~maestro-
Sw
t
Ar
I
Ar
1
5fUHD
7
QUICK
START
GUIDE
FOLLOW
THE
WEB
PROGRAMMING
STEPS
INSIDE
PRIOR
TO
INSTALLATION.
-0
: -
H·IS
~
AUTQMDTIVC
DATA
■
0'--UT1DN
■
WEB
PROGRAMMING
1-
INSTALL
THE
WEBLINK
DESKTOP
APPLICATION
Go
to www.idatalinkmaestro.com/plugin,
select your software version (Mac
or
PC)
and
follow the installation steps.
Be
sure to review the
system requirements before installing.
2-
REGISTER
A
WEBLINK
ACCOUNT
Once
installed, complete the Weblink registration
process and lag into Weblink.
3-
CONNECT
THE
MODULE
TO
YOUR
COMPUTER
Use the included
USB
cable to connect your
iDatalink Maestro module to your computer.
4-
WEBLINK
PROGRAMMING
Follow the programming steps until your module is
flashed, then download your install guide and owner's
manual
if
applicable.
5-
COMPLETE
VEHICLE"SPECIFIC
INSTALLATION
Follow the steps in your install guide and complete
the installation.
ADS
recommends having your
iOatalink Maestro device installed
by
a certified
technician.
Additional
accessories
may
be
required
and
sold
separately.
-
IE>S
AUTCIMOTtVC
~A.TA
■
OL.UTIOM
■
TECHNICAL
SUPPORT
877.212.6169
idatalinkmaestro.com
LIMITED
1-YEAR
WARRANTY
Automotive Data Solutions Inc. r·ADS
..
I warrants
to
the
original purchaser of the product that the following com-
ponents product shall be free of defects in material and
workmanship under
normal
use and circumstances for the
period of one
111
year from the date of original installation .
..
Authorized Dealer"· is defined
by
ADS
as a company who
qualifies to purchase products directly from
ADS,
or
one
of its approved distributors. Thus, products not sold nor
installed
by
an
Authorized Dealer are not covered
by
this
warranty. This includes, but is not limited to,
ADS
products
sold
on
Amazon.com, eBay.com, Walmart.com and Newe-
gg.com.
To
find an authorized retailer near
you,
visit
http://
maestro.idatalink.com/find-product.
In the event of any product malfunction during the Warranty
period, the original purchaser
must
return to the Autho-
rized Dealer where it was originally purchased with the
original proof of purchase. If a malfunction is detected, the
Authorized Dealer
will
elect
to
repair
or
repla
ce
the product
at its discretion. Labor costs may be applicable and are at
the discretion of the Authorized Dealer.
ADS
is not responsible
for
any damages whatsoever,
including but not limited to any consequential damages.
incidental damages, damages for loss of time, loss of
earnings, commercial loss, loss of economic opportunity
and the like that may
or
may not have resulted
from
the
installation
or
operation of an iDatalink Maestro product.
-
11-IS
AUTDMDTtVS
DATA
■
OLUTION
■
TE
CHNI
CAL
SUP
POR
T
877.212.6169
idatal
in
kmaestro.com
2014-2020
Harley-DaviDson roaD GliDe
INSTALL GUIDE
RETAINS HANDLE BAR CONTROLS
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here
in are the properties of their respective owners.
PRODUCTS REQUIRED
iDatalink Maestro RR or RR2 Radio Replacement Interface
iDatalink Maestro HD2 Installation Harness
Non-iDatalink Compatible Radio
PROGRAMMED FIRMWARE
ADS-RR(SR)-HD02-AS
ADDITIONAL RESOURCES
Maestro RR2 Programmable Outputs Guide
OR
OPTIONAL ACCESSORIES
ACC-RR-WPB
ACC-ABP-HD2
ACC-USB-HD2
ADS-RR(SR)-HD02-AS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2021 2
Harley-DaviDson roaD GliDe 2014-2020
NEED HELP?
TABLE OF CONTENTS
Installation Instructions 3
Wiring Diagram 4
Troubleshooting Table 5
WELCOME
Congratulations on the purchase
of your iDatalink Maestro RR Radio
replacement solution. You are
now a few simple steps away from
enjoying your new car radio with
enhanced features.
Before starting your installation,
please ensure that your iDatalink
Maestro module is programmed
with the correct fi rmware for your
vehicle and that you carefully review
the install guide.
Please note that Maestro RR will
only retain functionalities that
were originally available in the
vehicle.
1 866 427-2999
maestro.idatalink.com/support
www.12voltdata.com/forum
[email protected]
ADS-RR(SR)-HD02-AS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2021 3
Harley-DaviDson roaD GliDe 2014-2020
INSTALLATION INSTRUCTIONS
STEP 1
• Unbox the aftermarket radio and locate its main harness.
• Remove the factory radio.
• Cut and remove the RCA junction connectors. Connect
every wire from the aftermarket radio main harness to the
HD2 T-harness and match the wire functions.
STEP 2
• Connect the HD2 T-harness to the vehicle.
STEP 3
• Plug the aftermarket radio harnesses into the aftermarket
radio.
• Connect the steering wheel control cable to the
aftermarket radio.
STEP 4
• Connect all the harnesses to the Maestro RR module then
test your installation.
NOTE: Because the vehicle is not equipped with
illumination or reverse gear signals, these outputs can be
triggered manually by confi guring them as steering wheel
control commands during the fl ashing process in Weblink.
1
ADS-RR(SR)-HD02-AS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2021 4
Harley-DaviDson roaD GliDe 2014-2020
1
MAIN
HARNESS
HD2 T-HARNESS
STEP 3
STEP 4
MAESTRO RR MODULE
WIRING DIAGRAM
WIRES FROM
VEHICLE
FACTORY RADIO HARNESS
STEP 2
AUDIO
CABLE
NOT REQUIRED
DATA
CABLE
CONNECT TO
AFTERMARKET RADIO
STEERING WHEEL
CONTROL CABLE
CUT AND REMOVE
THE RCA JACKS
STEP 1
WHITE - LF SPEAKER (+)
WHITE/BLACK - LF SPEAKER (-)
GRAY - RF SPEAKER (+)
GRAY/BLACK - RF SPEAKER (-)
GREEN - LR SPEAKER (+)
GREEN/BLACK - LR SPEAKER (-)
PURPLE/BLACK - RR SPEAKER (-)
YELLOW - 12V (+)
BLACK - GROUND
RED - ACCESSORY (+)
BLUE/WHITE - AMP. TURN ON (+)
PURPLE - RR SPEAKER (+)
ORANGE - PARKING LIGHT (+)
PURPLE/WHITE - REVERSE LIGHT (+)
LTGREEN - E-BRAKE (-)
PINK - VEHICLE SPEED
SEE AFTERMARKET
RADIO GUIDE
FOR WIRE
COLORS
ADS-RR(SR)-HD02-AS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2021 5
Harley-DaviDson roaD GliDe 2014-2020
TROUBLESHOOTING TABLE
PROBLEM SOLUTION
Sound is very quiet. Cut and remove the RCA connectors and connect the wires to the speaker
outputs of the radio.
When a button on the handle bar is pressed, the light on the Maestro module
blinks but the radio does not respond.
Ensure the blue 4-pin steering wheel control cable is connected between the
maestro and the radio (the radio will use either the 3.5mm jack or the Blue/
Yellow wire, not both).
Refer to radio’s owners manual to verifi e if the radio has this function:
Steering Wheel Control (ON/OFF) : choose ON.
or
Steering Wheel Control (Custom/Preset): choose Preset
The light on the Maestro is fl ashing RED ONCE. There is no fi rmware on the module; fl ash the RR module.
MAESTRO RR RESET PROCEDURE:
Turn the key to the OFF position, then disconnect all connectors from the module.
Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may
take up to 10 seconds).
Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds to show the reset was successful.
TECHNICAL ASSISTANCE
Phone: 1-866-427-2999
Email: maestr[email protected]
Web: maestro.idatalink.com/support add www.12voltdata.com/forum/
IMPORTANT: To ensure proper operation, the aftermarket radio needs to have the latest fi rmware from the manufacturer. Please visit the radio
manufacturer’s website and look for any updates pertaining to your radio.
2014-2020
Harley-DaviDson street GliDe
INSTALL GUIDE
RETAINS HANDLE BAR CONTROLS
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here
in are the properties of their respective owners.
PRODUCTS REQUIRED
iDatalink Maestro RR or RR2 Radio Replacement Interface
iDatalink Maestro HD2 Installation Harness
Non-iDatalink Compatible Radio
PROGRAMMED FIRMWARE
ADS-RR(SR)-HD02-AS
ADDITIONAL RESOURCES
Maestro RR2 Programmable Outputs Guide
OR
OPTIONAL ACCESSORIES
ACC-RR-WPB
ACC-ABP-HD2
ACC-USB-HD2
ADS-RR(SR)-HD02-AS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2021 2
Harley-DaviDson street GliDe 2014-2020
NEED HELP?
TABLE OF CONTENTS
Installation Instructions 3
Wiring Diagram 4
Troubleshooting Table 5
WELCOME
Congratulations on the purchase
of your iDatalink Maestro RR Radio
replacement solution. You are
now a few simple steps away from
enjoying your new car radio with
enhanced features.
Before starting your installation,
please ensure that your iDatalink
Maestro module is programmed
with the correct fi rmware for your
vehicle and that you carefully review
the install guide.
Please note that Maestro RR will
only retain functionalities that
were originally available in the
vehicle.
1 866 427-2999
maestro.idatalink.com/support
www.12voltdata.com/forum
[email protected]
ADS-RR(SR)-HD02-AS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2021 3
Harley-DaviDson street GliDe 2014-2020
INSTALLATION INSTRUCTIONS
STEP 1
• Unbox the aftermarket radio and locate its main harness.
• Remove the factory radio.
• Cut and remove the RCA junction connectors. Connect
every wire from the aftermarket radio main harness to the
HD2 T-harness and match the wire functions.
STEP 2
• Connect the HD2 T-harness to the vehicle.
STEP 3
• Plug the aftermarket radio harnesses into the aftermarket
radio.
• Connect the steering wheel control cable to the
aftermarket radio.
STEP 4
• Connect all the harnesses to the Maestro RR module then
test your installation.
NOTE: Because the vehicle is not equipped with
illumination or reverse gear signals, these outputs can be
triggered manually by confi guring them as steering wheel
control commands during the fl ashing process in Weblink.
1
ADS-RR(SR)-HD02-AS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2021 4
Harley-DaviDson street GliDe 2014-2020
1
MAIN
HARNESS
HD2 T-HARNESS
STEP 3
STEP 4
MAESTRO RR MODULE
WIRING DIAGRAM
WIRES FROM
VEHICLE
FACTORY RADIO HARNESS
STEP 2
AUDIO
CABLE
NOT REQUIRED
DATA
CABLE
CONNECT TO
AFTERMARKET RADIO
STEERING WHEEL
CONTROL CABLE
CUT AND REMOVE
THE RCA JACKS
STEP 1
WHITE - LF SPEAKER (+)
WHITE/BLACK - LF SPEAKER (-)
GRAY - RF SPEAKER (+)
GRAY/BLACK - RF SPEAKER (-)
GREEN - LR SPEAKER (+)
GREEN/BLACK - LR SPEAKER (-)
PURPLE/BLACK - RR SPEAKER (-)
YELLOW - 12V (+)
BLACK - GROUND
RED - ACCESSORY (+)
BLUE/WHITE - AMP. TURN ON (+)
PURPLE - RR SPEAKER (+)
ORANGE - PARKING LIGHT (+)
PURPLE/WHITE - REVERSE LIGHT (+)
LTGREEN - E-BRAKE (-)
PINK - VEHICLE SPEED
SEE AFTERMARKET
RADIO GUIDE
FOR WIRE
COLORS
ADS-RR(SR)-HD02-AS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2021 5
Harley-DaviDson street GliDe 2014-2020
TROUBLESHOOTING TABLE
PROBLEM SOLUTION
Sound is very quiet. Cut and remove the RCA connectors and connect the wires to the speaker
outputs of the radio.
When a button on the handle bar is pressed, the light on the Maestro module
blinks but the radio does not respond.
Ensure the blue 4-pin steering wheel control cable is connected between the
maestro and the radio (the radio will use either the 3.5mm jack or the Blue/
Yellow wire, not both).
Refer to radio’s owners manual to verifi e if the radio has this function:
Steering Wheel Control (ON/OFF) : choose ON.
or
Steering Wheel Control (Custom/Preset): choose Preset
The light on the Maestro is fl ashing RED ONCE. There is no fi rmware on the module; fl ash the RR module.
MAESTRO RR RESET PROCEDURE:
Turn the key to the OFF position, then disconnect all connectors from the module.
Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may
take up to 10 seconds).
Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds to show the reset was successful.
TECHNICAL ASSISTANCE
Phone: 1-866-427-2999
Email: maestr[email protected]
Web: maestro.idatalink.com/support add www.12voltdata.com/forum/
IMPORTANT: To ensure proper operation, the aftermarket radio needs to have the latest fi rmware from the manufacturer. Please visit the radio
manufacturer’s website and look for any updates pertaining to your radio.
/