Reflex Stellapro User guide

Brand: Reflex

Model: Stellapro

Type: User guide

Below you will find brief information for Battery Handle, Reflex. This document provides mounting instructions for the Reflex battery handle, and how to mount the battery handle to a C-Stand and to the Reflex itself. It also covers the battery's runtime, charging times, LED charge indicators, and information about the StellaPro Imaging Control App, device registration, firmware updates, and battery discharge warnings.

Below you will find brief information for Battery Handle, Reflex. This document provides mounting instructions for the Reflex battery handle, and how to mount the battery handle to a C-Stand and to the Reflex itself. It also covers the battery's runtime, charging times, LED charge indicators, and information about the StellaPro Imaging Control App, device registration, firmware updates, and battery discharge warnings.

Quick Start Guide

C-Stand Mount Interface

800-0381

BATTERY HANDLE

MOUNTING BATTERY

HANDLE TO CSTAND

Handstrap / Pole Strap

Mounting Point

Mounting Point

MOUNTING BATTERY TO REFLEX

DOWNLOAD STELLAPRO

IMAGING CONTROL APP (iOS)

Registering your device

Register your device using the StellaPro app to

get access to the latest ﬁrmware updates.

Firmware update

As we make improvments and add new capabili-

ties make sure to check for the latest ﬁrmware to

ensure the Reﬂex is operating to it’s full capa-

bilies. Download the latest update to your device

directly from your phone.

USB-C Port Cover

Power Button

Battery Runtime on Continious:

High (30 minutes)

Low: (600 minutes)

Charge (2hrs)

15,000 full power burst per charge.

Mounting Latch

OPERATION

Fully charge battery use

Battery generates high temperature heat while on

continuous. Practice caution when handling after

extended use.

Battery Discharge Warning:

Make sure to charge the battery every 6 months

or the battery will become deeply discharged and

may not operate at optimum condition.

4 LEDS to indicate charge

(25, 50, 75, 100)

Bi-Color LED to indicate state

Charging (Green)

Discharging (Red)

1
2

Reflex Stellapro User guide

Brand: Reflex

Model: Stellapro

Type: User guide

Below you will find brief information for Battery Handle, Reflex. This document provides mounting instructions for the Reflex battery handle, and how to mount the battery handle to a C-Stand and to the Reflex itself. It also covers the battery's runtime, charging times, LED charge indicators, and information about the StellaPro Imaging Control App, device registration, firmware updates, and battery discharge warnings.

Download PDF

Other documents