2. VISUAL COMFORT
  3. PCD3100HAB-L

VISUAL COMFORT PCD3100HAB-L User manual

  • Hello! I've reviewed the assembly instructions for the Visual Comfort Comtesse Medium Table Lamp, model PCD 3100. This document provides detailed steps for assembling the lamp, including attaching the shade and harp. It also includes care instructions. I am ready to assist with any questions you might have about the instructions or this specific product.
  • What tools are needed for assembly?
    Is the light bulb included?
    How should the lamp be cleaned?
Comtesse Medium Table Lamp
Item # PCD 3100
ASSEMBLY INSTRUCTIONS
This light fixture should be installed in accordance with all applicable,
local installation codes, and by a person familiar with the construction
and operation of it, as well as the hazards involved. Inspect item and
contents carefully. If any damage or defect is found, do not install.
Retain all packaging material until installation is complete and approved.
1. Carefully remove all parts from the box. Place on a clean, soft surface.
2. Remove socket ring (D) from socket (E).
3. Install harp (C) to socket (E) and secure with socket ring (D).
4. Remove finial (A) from harp (C).
5. Remove shade (B) from packaging and install to harp (C) using
finial (A).
NOTE: If shade has additional packaging, carefully cut off from
interior of shade to avoid damages.
6. Install light bulb into the socket (E).
7. Remove protective cover (F) from plug.
8. Plug into electrical outlet and test fixture.
Care Instructions: Clean only with a soft dry cloth or feather duster. Do
not use abrasive or chemical agents.
NOTICE:
Bulb not included
F
E
D
C
B (Packaged separately)
LED
A
TOOLS REQUIRED (NOT INCLUDED):
Scissors
US
M
L
I
D
S
E
T
/