Axiom HN-1 User manual

HN-1
Axiom
Brand
Axiom
Model
HN-1
Type
User manual

Axiom HN-1 is a wall-mounted device designed for use with hydronic heating systems. It comes with a wall bracket, ball valves, a manual air vent, a pressure gauge, and a three-way ETV-1 valve. The device allows for filling, draining, and servicing the system and expansion tank, as well as draining the system only. It has a maximum pressure rating of 1030 kPa (150 psi) at 100 °C (212 °F) and is backed by a one-year warranty against defects in materials and workmanship.

Axiom HN-1 is a wall-mounted device designed for use with hydronic heating systems. It comes with a wall bracket, ball valves, a manual air vent, a pressure gauge, and a three-way ETV-1 valve. The device allows for filling, draining, and servicing the system and expansion tank, as well as draining the system only. It has a maximum pressure rating of 1030 kPa (150 psi) at 100 °C (212 °F) and is backed by a one-year warranty against defects in materials and workmanship.

HN SERIES HYDRO-NODE INSTALLATION INSTRUCTIONS
WARNING
NOT FOR POTABLE WATER
WALL MOUNTING
Unit shall be mounted on a wall using lag bolts connected to an appropriate material/structure designed
to support the weight of the bracket, expansion tank, and any related system piping material.
INCLUDED COMPONENTS
TYPICAL CONNECTION SCHEMATIC
HN-1
HN-2
HN-3
Wall bracket only
Wall bracket comes with 3 ball valves,
¼” Manual Air Vent, and ¼” NPT plug
Wall bracket comes with 2 ball valves, ¼”
Manual Air Vent, pressure gauge, and
three way ETV-1 valve
1
ETV VALVE POSITIONS WITH THE HYDRO-NODE
Description
Operation
Valve Position
Flow Path
Normal
Operation
Fill/Drain
System &
Expansion
Tank
Drain &
Service
Expansion
Tank
Drain System
Only
HYDRO-NODE DIMENSIONS
MAX PRESSURE
1030 kPa (150 psi) @ 100 °C (212 °F)
LIMITED WARRANTY
The Hydro-NODE is warranted against defects in materials and workmanship for one year.
3603 Burron Avenue, Saskatoon, SK S7P 0E4 Ph: (306) 651-1815 Fax: (306) 651-2293
email: [email protected] website: www.axiomind.com
2
HYDRO-NODE gamme HN – DIRECTIVES D’INSTALLATION
AVERTISSEMENT
Ne doit pas servir pour l’eau potable
MONTAGE MURAL
Ce dispositif doit être monté sur un mur à l'aide de tirefonds fixés dans une structure/un matériau
appropriés conçus pour supporter le poids du support, du réservoir de dilatation et de tout accessoire
de tuyauterie connexe.
COMPOSANTS INCLUS
SCHÉMA DE RACCORDEMENT TYPIQUE
HN-1
HN-2
HN-3
Support mural seulement
Support mural avec 3 robinets à bille,
purgeur d’air manuel ¼" et bouchon ¼"
Support mural avec 2 robinets à bille,
purgeur d’air manuel ¼", manomètre et
robinet 3 voies ETV-1
Hydro-NODE - POSITIONS DU ROBINET
Fonctionnement
Position du robinet
Sens du flux
Fonctionnement
normal
Remplissage/vidange
système et réservoir
d’expansion
Vidange et entretien
réservoir
d’expansion
Vidange système
seulement
DIMENSIONS DE L’HYDRO-NODE
PRESSION MAXI
1030 kPa (150 psi) à 100 °C (212 °F)
GARANTIE LIMITÉE
L’Hydro-NODE est garanti un an contre les défauts de matériaux
3603 Burron Avenue, Saskatoon, SK S7P 0E4 Tél.: (306) 651-1815 Fax : (306) 651-2293
[email protected] www.axiomind.com
2
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Axiom HN-1 User manual

HN-1
Axiom
Brand
Axiom
Model
HN-1
Type
User manual

Axiom HN-1 is a wall-mounted device designed for use with hydronic heating systems. It comes with a wall bracket, ball valves, a manual air vent, a pressure gauge, and a three-way ETV-1 valve. The device allows for filling, draining, and servicing the system and expansion tank, as well as draining the system only. It has a maximum pressure rating of 1030 kPa (150 psi) at 100 °C (212 °F) and is backed by a one-year warranty against defects in materials and workmanship.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages

Related papers

Other documents