Halcyon R743 User manual

Brand: Halcyon

Model: R743

Type: User manual

R743 W34

FIG-1

FIG-4

FIG-2

Caution,risk of electric shock.

OFF

ver:1.0

OFF

RISK OF FIRE - Required clearance from structural members and building elements

Side Clearance to building element (eg timber, joist or Batten) (SCB): 25mm

Height Clearance to building element (eg timber, joist or Batten) (HCB): 25mm

Minimum Insulation Clearance to building element (MIC): 25mm

Recessed Luminaire Classification:

IC - building insulation that can safely be continuously

exposed to 90°C allowed to abut and cover the luminaire.

If the external flexible cable or cord of this

luminaire is damaged, it shall be exclusively

replaced by the manufacturer or his service agent

or a similar qualified person in order to avoid a hazard.

For indoor use only.

This luminaire must be installed by a qualified Registered

Electrician to prevent damage to the luminaire and maintain

electrical safety.

The light source of this luminaire is not replaceable; when the light source

reaches its end of life the whole luminaire shall be replaced.

DO NOT INSTALL THROUGH JOIST, BEAM, RAFTER OR CEILING BATTEN

Note: Side/Height Clearance is measured from heat sink

FIG-3

∅200MM

3-15MM

Torque:

3.5-4kgf.cm

4000K

3000K

Attention:

when switching the colour

temperature, please make

sure the power is off.

INPUT

OUTPUT

IP54

IP20

R743 W34

700mA or 500mA Constant Current

26W (@700mA) or 18.5W (@500mA)

IP54 (Front), IP20 (Back)

Halcyon R743 User manual

Halcyon R743 User manual

Other documents