Frigidaire FHWE232WB2 User guide

Brand: Frigidaire

Model: FHWE232WB2

Type: User guide

Frigidaire FHWE232WB2 is a versatile air conditioner that offers various features to keep you comfortable. It features cooling and heating modes, allowing you to maintain your desired temperature all year round. The Eco feature helps save energy by turning off cooling once the set temperature is reached, while the Sleep mode gradually increases the temperature for a comfortable night's sleep. You can also operate the fan only to circulate air without cooling or heating. The unit comes with a washable air filter that can be easily cleaned after 250 hours of use.

Remember: Your Use & Care Guide has complete descriptions of all these features and more.

Please read it carefully and keep in a safe place.

When plugging unit in, always press the RESET

button on the Current Device.

QUICK REFERENCE GUIDE

Only install unit according to the supplied Installation Instructions.

To Get Cool

After 250 hours of use the Filter light will illuminate to remind you to clean air

filter. Press Filter button to turn off light.

To Clean the Air Filter

To Enter Timer On or Timer Off

To Compensate for Opening Doors

*Eco

When Eco feature is activated, cooling will turn off once the set temperature is reached. Every

10 minutes fan will run so room temperature can be sensed.

To Run Fan Only

Press Mode to select Fan Only

Fan will circulate air inside the room without air conditioned cooling.

Press Fan Speed button to increase fan speed.

You may also select Auto Fan, which will speed up or slow down fan speeds

automatically based on significant changes in room temperature.

To Go to Sleep

Press the Sleep button

Temperature increases 4°F or 2°C over 1 hour and then holds this elevated

setting for 7 hours.

Press On/Off button. That's it!

The unit is programmed to start in

cool mode, with auto fan speed, Eco* feature on

To Get Warm

1. Press On/Off button

2. Press Mode to select Heat

3. Press Fan Speed to choose speed (Except

8000BTU model which is low speed only)

and a temperature setting of 72°F.

To Change Temperature unit

Press and hold the up and down buttons together for 3 seconds

to change the display temperature unit between °F and °C.

and

To delay stop(or start), press the Timer button when the unit is power-on(or

power-off), then the "timer off" indicator(or "timer on" indicator) will illuminate.

Set the delay stop(or start) timer, then the control will count down the time(8,

7.5, 7, etc.) left, and all other settings will remain the same as they were before

the timer setting is confirmed, until stop(or start).

Setting combination of “delay stop delay start” or “delay start

delay stop” is workable. The timer setting can be canceled by either pressing

and holding the timer button for 2 seconds, or pressing the power on/off button

at any time to turn off the unit directly.

turn off turn on

P/N 16120300A23092

Frigidaire FHWE232WB2 User guide

Frigidaire FHWE232WB2 User guide

Frigidaire FHWE232WB2 User guide

Related papers

Other documents