60cm Ceramic
Cooktop
QUICK START GUIDE
TIPS FOR USING & OPERATING YOUR COOKTOP (HBRCC604)
SUPPORT: 1300 11 4357 | WWW.HARBOUR-APPLIANCES.COM.AU
9 Stage Power
Settings
4 Cooking
Zones
Designer
Finishes
Premium Safety
Features
Starting Up Your Ceramic Cooktop
1. Touch the ON/OFF power control. After the power is on, the buzzer will
beep once and all the displays show either “–” or “––” indicating the cooktop
has entered standby mode.
2. Place a suitable pan on the cooking zone that you wish to use.
Make sure the bottom of the pan and the surface of the cooking zone
are clean and dry.
3. Select a heat setting by touching the ‘–’ or ‘+’ buttons.
If you don’t choose a heat setting within 1 minute, the ceramic cooktop
will automatically switch off. You will need to start again at step 1.
You can modify the heat setting at any time during cooking.
For detailed Operation Instructions, please refer to pages 16—22 of your user manual.
Support: 1300 11 43 57 WWW.HARBOURAPPLIANCES.COM.AU
Tips & Tricks for using
your new Cooktop
QUICK START GUIDE HBRCC604
Version: 1.0
1. ON/Off control
2. Power regulating controls
3. Timer regulating controls
4. Child lock
Control Panel
4 122322
-
1
-
2
