2. darklab
  3. POWERBOLT Plus
POWERBOLT Plus

darklab POWERBOLT Plus Operating instructions

  • Hello! I've reviewed the user manual for the POWERBOLT, LIGHTNINGBOLT, LIGHTNINGBOLT UNI, AIRBOLT and AIRBOLT MINI devices. This document details the operational features of the power supplies, including hotkeys, LED indicators, and Bluetooth functionality. I'm ready to answer any questions you have about these devices and their use.
  • How do I turn on/off the Bluetooth?
    How to perform a hard reset?
    How do I adjust the eGive level?
DEVICE MENUS VERSION 73
Power Button: turn device on/off
White: indicates battery charge level
Blue: adjust eGive level (use ‘up’ and ‘down’ to control)
Green: set voltage resolution from 0.1 to 0.5 voltage steps
Orange: automatic LED brightness dimming (enable/disable)
Light Blue: manual LED brightness control (use ‘up’ and ‘down’ to control)
Pink: sync or un-sync footswitch (for compatible devices)
Red: shipping mode
POWERBOLT +, LIGHTNINGBOLT, LIGHTNINGBOLT UNI,
AIRBOLT, AIRBOLT MINI MENU
THE POWERBOLT MENU
Hot Keys
up/down button press: e-give control
up/down button press/hold (for at least 3 seconds): footswitch pairing
power/down button press: hard reset
turn on/off the Bluetooth: press the up button and power button until a dark blue LED comes on
Power Button: turn device on/off
White: indicates battery charge level
Blue: adjust eGive level (use ‘up’ and ‘down’ to control)
Yellow: turn Bluetooth on/off
Green: set voltage resolution from 0.1 to 0.5 voltage steps
Orange: automatic LED brightness dimming (enable/disable)
Light Blue: manual LED brightness control (use ‘up’ and ‘down’ to control)
Red: shipping mode
Hot Keys
up/down button press: e-give control
power/down button press: hard reset
turn on/off the Bluetooth: press the up button and power button until a dark blue LED comes on
/