POWERBOLT Plus

darklab POWERBOLT Plus Operating instructions

  • Hello! I am an AI chatbot trained to assist you with the darklab POWERBOLT Plus Operating instructions. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
DEVICE MENUS VERSION 73
Power Button: turn device on/off
White: indicates battery charge level
Blue: adjust eGive level (use ‘up’ and ‘down’ to control)
Green: set voltage resolution from 0.1 to 0.5 voltage steps
Orange: automatic LED brightness dimming (enable/disable)
Light Blue: manual LED brightness control (use ‘up’ and ‘down’ to control)
Pink: sync or un-sync footswitch (for compatible devices)
Red: shipping mode
POWERBOLT +, LIGHTNINGBOLT, LIGHTNINGBOLT UNI,
AIRBOLT, AIRBOLT MINI MENU
THE POWERBOLT MENU
Hot Keys
up/down button press: e-give control
up/down button press/hold (for at least 3 seconds): footswitch pairing
power/down button press: hard reset
turn on/off the Bluetooth: press the up button and power button until a dark blue LED comes on
Power Button: turn device on/off
White: indicates battery charge level
Blue: adjust eGive level (use ‘up’ and ‘down’ to control)
Yellow: turn Bluetooth on/off
Green: set voltage resolution from 0.1 to 0.5 voltage steps
Orange: automatic LED brightness dimming (enable/disable)
Light Blue: manual LED brightness control (use ‘up’ and ‘down’ to control)
Red: shipping mode
Hot Keys
up/down button press: e-give control
power/down button press: hard reset
turn on/off the Bluetooth: press the up button and power button until a dark blue LED comes on
/