Symmons IM600 User manual

IM600
Symmons
Brand
Symmons
Model
IM600
Category
Sanitary ware
Type
User manual

This manual is also suitable for

IceMate™
Model Numbers Feature Highlights
IM600
IceMateTM Valve
Operation & Maintenance Manual
☐IM600 IceMateTM Supply Box with Valve • Installation straps for 16" O.C. stud mounting or direct-
to-stud mounting.
• Ice Maker Valve.
• 1/2-14 NPSM with 1/2" Sweat Inlets 1/4" Outlet.
• Valve can be installed as bottom or top supply.
• Accommodates 1 layer of 1/2" drywall up to 2 layers of
5/8" drywall.
• Mounting straps.
Compliance
- ASME A112.18.1/CSA B125.1
- NSF 61.9, NSF 372
- ASSE 1010 (IM600A only)
Options/Modifications
☐AWater Hammer Arrestor Size AA
☐P1 Crimp PEX
☐P2 Cold Expansion PEX
Note: Append appropriate -sux to model number.
Dimensions
Measurements
A7", 178 mm
B6-5/8", 168 mm
C17-1/2", 445 mm
DMin. 1/2", 13 mm
Max. 1-1/4", 32 mm
E2-7/8", 72 mm
C
D
E
A
B
c
Limited Lifetime - to the original end
purchaser in consumer/residential
installations.
10 Years - for commercial/industrial
installations. Refer to
www.symmons.com/warranty for
complete warranty information.
Warranty
Note: Dimensions subject to change without notice.
Symmons Industries, Inc. ■ 31 Brooks Drive ■ Braintree, MA 02184 ■ Phone: (800) 796-6667 ■ Fax: (800) 961-9621
Copyright © 2021 Symmons Industries, Inc. ■ symmons.com ■ [email protected]om ■ ZV-3467 REV A ■ 031622
Installation
Section A: (Steps 1-7)
1. Slide straps in mounting tabs
2. Attach strap to studs with user provided screws
3. Insert provided screws through tabs to secure box in
place
Section B: (Step 4)
4. Knockout inside hole of supply box for water supply
5. Secure valve to box with supplied nut
6. Connect supplies to valves with either:
a. Sweat connect
b. P1 Option - Crimp PEX or
P2 Option - Cold Expansion PEX
7. Check for leaks
Section C (Steps 8 & 9)
8. Complete finish wall
9. Press on covers
a. If finish wall is 1/2’’ thick, break tabs from cover
o
b. If 2 layers of 5/8” drywall leave tabs on
Section D (Step 10)
Direct Stud Installation:
10. Mount box on adjacent side of wall stud with
provided tabs
Section E (Step 11)
Surface Mount Installation:
11. Drill holes out of box and use user provided screws
to attach to wall
1
3
4
56
2
9
10
11
Section A
Section C
Section B
Section D Section E
4
  • Page 1 1
  • Page 2 2

Symmons IM600 User manual

IM600
Symmons
Brand
Symmons
Model
IM600
Category
Sanitary ware
Type
User manual
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents