2. Global Industrial
  3. 412663

Global Industrial 412663 Installation guide

  • Hello! I've reviewed the Bench Scale Installation Guide and I'm ready to assist you with any questions you may have about installing your scale. The document provides step-by-step instructions on removing protective tags, assembling the column, connecting the indicator, and leveling the scale. I can help with details on specific steps or components.
  • What should be done before using the scale?
    How is the indicator attached?
    How do you level the scale?
Platform
Column
Indicator U-Bracket
Hardware
T-Adapter
Remove
Remove
Tag
Tray
Pull
Lift tray, and remove the four
yellow rubber frame protectors tags
Remove
Before Using!!!
Cable
Carefully, without tugging, run the
cable through the column and
assemble column to base
Cable
Assemble T-Adapter and U-bracket
as shown below
Install indicator to U bracket with
2 knobs and connect the cable to
the indicator interface port
Tray
Feet
Level Bubble
Place the tray on the scale frame;
Use level bubble to
level the scale by
adjusting the feet
Cable
Interface
Bench Scale Installation Guide
1 2
345
Knob
U-Braket
T-Adapter
Model no. 412663, 412664, 412665, 412666, 412667
/