medmassager rollvibe max massage roller Owner's manual

rollvibe max massage roller
Brand
medmassager
Model
rollvibe max massage roller
Type
Owner's manual

MedMassager RollVibe Max Massage Roller is a handheld massaging device that offers four intensity settings and provides targeted relief to sore muscles. With a powerful motor that delivers up to 3700 revolutions per minute, it promotes relaxation and helps enhance blood circulation. The compact design and rechargeable battery make it an ideal companion for post-workout recovery or soothing away tension after a long day.

MedMassager RollVibe Max Massage Roller is a handheld massaging device that offers four intensity settings and provides targeted relief to sore muscles. With a powerful motor that delivers up to 3700 revolutions per minute, it promotes relaxation and helps enhance blood circulation. The compact design and rechargeable battery make it an ideal companion for post-workout recovery or soothing away tension after a long day.

product care
owner’s manual
rollvibe max massage roller
1
2 3 4
5
6
the amount of electricity AC 100-240V (50/60 Hz) 0.28A
DC9V 1000 mApower supply • DO NOT allow product to get wet.
• Unplug unit when not in use.
• Use a dry cloth to wipe clean.
• Unplug unit after it is fully charged.
• If the unit is unused for an extended period of time,
store it in a cool, dry place.
troublesho oting
problem
The massager does not
vibrate even if the
power button is pressed.
troubleshooting
• The massager and power adapter
are still connected.
• The battery needs to be recharged.
Note: The vibration function cannot
be used during charging.
Vibration intensity
has weakened.
• There is insufficient power and
the battery needs to be recharged.
Vibration only lasts a
few minutes, even after
a full charge.
• Extremely low or high ambient temperatures
can cause the product to malfunction. Please
use it within the recommended ambient
temperature range of 50° F to 104° F.
• The battery needs to be replaced.
Consult MedMassager™.
Note: DO NOT replace the battery yourself.
Doing so may result in damage to the product.
The massager suddenly
stopped working.
• The product stops automatically
after 10 minutes.
There is an abnormal noise
while using the massager.
• The product will emit an action sound
when vibrating.
specifications
product name rollvibe max massage roller
battery specification DC 7.4V 2200mAh
charging time approx. 3.5 hours (full charge)
full discharge time 50 minutes or 5 cycles of 10 minutes
vibration revolutions
(rate per minute)
1st gear motor speed: 2300RPM
2nd gear motor speed: 2700RPM
3rd gear motor speed: 3100RPM
4th gear motor speed: 3700RM
auto shut-off time 10 minutes
ambient temperature 50° F to 104° F
maximum weight 150kg or 330lbs
product accessories power adapter and manual
manufacturing origin China
The actual time and number of uses depends on the use environment.
vibration modes
1. Press the power button to turn on the unit.
The battery indicator lights will show the current power level.
2. Press the power button again to change the vibration setting.
The vibration level indicator lights will show the current strength level.
To increase vibration setting, continue to press the power button until
the desired level is reached.
3. To shut down the unit, press the power button until you cycle through
all four vibration settings.
The RollVibe Max Massage Roller oers four vibration seings.
You can make a selection by pressing the power buon.
The vibration function will automatically shut-off after 10 minutes.
Using this massager for longer periods of time may result in injury.
intensity 1
intensity 2 intensity 4
intensity 3
AC
charger
power supply
LED indicator lights
power button
charging port
charging method
before use
charger
charging port
• Make sure the massager is not damaged before use.
• Charge fully before using.
• If there is any issue, stop using the massager immediately
and contact MedMassager™ for repair.
• This massager uses vibration. Pay attention to your surroundings.
1. Connect the power cord to the charging port and plug into the wall.
2. Once charging begins, one indicator light should be illuminated.
Battery is fully-charged when all four indicator lights are on.
3. After charging, please unplug the unit before use.
safety guidelines
Carefully read all guidelines before using.
THIS MASSAGER IS NOT A TOY. ADULT SUPERVISION IS NECESSARY.
THIS MASSAGER IS NOT WATERPROOF.
• To reduce the risk of electric shock, always unplug the unit from the
electrical outlet immediately after using and before cleaning.
• DO NOT reach for the unit if it has fallen into water.
• DO NOT use while bathing or showering.
• DO NOT place or store the unit where it can fall or be pulled into water.
• DO NOT drop water or other liquids onto the unit.
• DO NOT touch the massager with wet hands to avoid electric shock, product
malfunction or accident.
• Turn off the massager before unplugging.
• Before each use, check the power supply cord and be sure that every
part is in good condition. All parts must be firmly assembled.
• To disconnect, turn all controls to the OFF position, then remove the plug from
the outlet.
• If the unit is damaged or not working properly, contact MedMassager™ for service or
repair. DO NOT open the unit to service it yourself.
• DO NOT use this unit if you have a serious disease, inflammation of the skin,
hemorrhage tendencies, or if pregnant, unless otherwise directed by your physician.
• Use common sense when operating this unit. It is an electrical device and if used
improperly may cause injury, or even death.
• As with any health issue, always consult with your doctor if you are unsure about
a change in your routine.
• To reduce the risk of burns, fire, electric shock or injury to persons, the unit should
never be left unattended when plugged in. Unplug the unit when not in use.
• Close supervision is necessary when the unit is used by children or people
with disabilities.
• Use the unit only as described in this manual. Do not use attachments unless
supplied by MedMassager™ and intended for use with this product.
• Never operate this unit if it has a damaged cord or plug.
• DO NOT attempt to clean or lubricate the internal parts.
• DO NOT modify or disassemble the massager.
• Store in a cool, dry, lint and dust-free place.
If you have tried all troubleshooting options and nothing is working,
please contact MedMassager™ for further assistance.
product care
owner’s manual
rollvibe max massage roller
1
2 3 4
5
6
the amount of electricity AC 100-240V (50/60 Hz) 0.28A
DC9V 1000 mApower supply
• DO NOT allow product to get wet.
• Unplug unit when not in use.
• Use a dry cloth to wipe clean.
• Unplug unit after it is fully charged.
• If the unit is unused for an extended period of time,
store it in a cool, dry place.
troublesho oting
problem
The massager does not
vibrate even if the
power button is pressed.
troubleshooting
• The massager and power adapter
are still connected.
• The battery needs to be recharged.
Note: The vibration function cannot
be used during charging.
Vibration intensity
has weakened.
• There is insufficient power and
the battery needs to be recharged.
Vibration only lasts a
few minutes, even after
a full charge.
• Extremely low or high ambient temperatures
can cause the product to malfunction. Please
use it within the recommended ambient
temperature range of 50° F to 104° F.
• The battery needs to be replaced.
Consult MedMassager™.
Note: DO NOT replace the battery yourself.
Doing so may result in damage to the product.
The massager suddenly
stopped working.
• The product stops automatically
after 10 minutes.
There is an abnormal noise
while using the massager.
• The product will emit an action sound
when vibrating.
specifications
product name rollvibe max massage roller
battery specification DC 7.4V 2200mAh
charging time approx. 3.5 hours (full charge)
full discharge time 50 minutes or 5 cycles of 10 minutes
vibration revolutions
(rate per minute)
1st gear motor speed: 2300RPM
2nd gear motor speed: 2700RPM
3rd gear motor speed: 3100RPM
4th gear motor speed: 3700RM
auto shut-off time 10 minutes
ambient temperature 50° F to 104° F
maximum weight 150kg or 330lbs
product accessories power adapter and manual
manufacturing origin China
The actual time and number of uses depends on the use environment.
vibration modes
1. Press the power button to turn on the unit.
The battery indicator lights will show the current power level.
2. Press the power button again to change the vibration setting.
The vibration level indicator lights will show the current strength level.
To increase vibration setting, continue to press the power button until
the desired level is reached.
3. To shut down the unit, press the power button until you cycle through
all four vibration settings.
The RollVibe Max Massage Roller oers four vibration seings.
You can make a selection by pressing the power buon.
The vibration function will automatically shut-off after 10 minutes.
Using this massager for longer periods of time may result in injury.
intensity 1
intensity 2 intensity 4
intensity 3
AC
charger
power supply
LED indicator lights
power button
charging port
charging method
before use
charger
charging port
• Make sure the massager is not damaged before use.
• Charge fully before using.
• If there is any issue, stop using the massager immediately
and contact MedMassager™ for repair.
• This massager uses vibration. Pay attention to your surroundings.
1. Connect the power cord to the charging port and plug into the wall.
2. Once charging begins, one indicator light should be illuminated.
Battery is fully-charged when all four indicator lights are on.
3. After charging, please unplug the unit before use.
safety guidelines
Carefully read all guidelines before using.
THIS MASSAGER IS NOT A TOY. ADULT SUPERVISION IS NECESSARY.
THIS MASSAGER IS NOT WATERPROOF.
• To reduce the risk of electric shock, always unplug the unit from the
electrical outlet immediately after using and before cleaning.
• DO NOT reach for the unit if it has fallen into water.
• DO NOT use while bathing or showering.
• DO NOT place or store the unit where it can fall or be pulled into water.
• DO NOT drop water or other liquids onto the unit.
• DO NOT touch the massager with wet hands to avoid electric shock, product
malfunction or accident.
• Turn off the massager before unplugging.
• Before each use, check the power supply cord and be sure that every
part is in good condition. All parts must be firmly assembled.
• To disconnect, turn all controls to the OFF position, then remove the plug from
the outlet.
• If the unit is damaged or not working properly, contact MedMassager™ for service or
repair. DO NOT open the unit to service it yourself.
• DO NOT use this unit if you have a serious disease, inflammation of the skin,
hemorrhage tendencies, or if pregnant, unless otherwise directed by your physician.
• Use common sense when operating this unit. It is an electrical device and if used
improperly may cause injury, or even death.
• As with any health issue, always consult with your doctor if you are unsure about
a change in your routine.
• To reduce the risk of burns, fire, electric shock or injury to persons, the unit should
never be left unattended when plugged in. Unplug the unit when not in use.
• Close supervision is necessary when the unit is used by children or people
with disabilities.
• Use the unit only as described in this manual. Do not use attachments unless
supplied by MedMassager™ and intended for use with this product.
• Never operate this unit if it has a damaged cord or plug.
• DO NOT attempt to clean or lubricate the internal parts.
• DO NOT modify or disassemble the massager.
• Store in a cool, dry, lint and dust-free place.
If you have tried all troubleshooting options and nothing is working,
please contact MedMassager™ for further assistance.
product care
owner’s manual
rollvibe max massage roller
1
2
3 4
5
6
the amount of electricity AC 100-240V (50/60 Hz) 0.28A
DC9V 1000 mApower supply • DO NOT allow product to get wet.
• Unplug unit when not in use.
• Use a dry cloth to wipe clean.
• Unplug unit after it is fully charged.
• If the unit is unused for an extended period of time,
store it in a cool, dry place.
troublesho oting
problem
The massager does not
vibrate even if the
power button is pressed.
troubleshooting
• The massager and power adapter
are still connected.
• The battery needs to be recharged.
Note: The vibration function cannot
be used during charging.
Vibration intensity
has weakened.
• There is insufficient power and
the battery needs to be recharged.
Vibration only lasts a
few minutes, even after
a full charge.
• Extremely low or high ambient temperatures
can cause the product to malfunction. Please
use it within the recommended ambient
temperature range of 50° F to 104° F.
• The battery needs to be replaced.
Consult MedMassager™.
Note: DO NOT replace the battery yourself.
Doing so may result in damage to the product.
The massager suddenly
stopped working.
• The product stops automatically
after 10 minutes.
There is an abnormal noise
while using the massager.
• The product will emit an action sound
when vibrating.
specifications
product name rollvibe max massage roller
battery specification DC 7.4V 2200mAh
charging time approx. 3.5 hours (full charge)
full discharge time 50 minutes or 5 cycles of 10 minutes
vibration revolutions
(rate per minute)
1st gear motor speed: 2300RPM
2nd gear motor speed: 2700RPM
3rd gear motor speed: 3100RPM
4th gear motor speed: 3700RM
auto shut-off time 10 minutes
ambient temperature 50° F to 104° F
maximum weight 150kg or 330lbs
product accessories power adapter and manual
manufacturing origin China
The actual time and number of uses depends on the use environment.
vibration modes
1. Press the power button to turn on the unit.
The battery indicator lights will show the current power level.
2. Press the power button again to change the vibration setting.
The vibration level indicator lights will show the current strength level.
To increase vibration setting, continue to press the power button until
the desired level is reached.
3. To shut down the unit, press the power button until you cycle through
all four vibration settings.
The RollVibe Max Massage Roller oers four vibration seings.
You can make a selection by pressing the power buon.
The vibration function will automatically shut-off after 10 minutes.
Using this massager for longer periods of time may result in injury.
intensity 1
intensity 2 intensity 4
intensity 3
AC
charger
power supply
LED indicator lights
power button
charging port
charging method
before use
charger
charging port
• Make sure the massager is not damaged before use.
• Charge fully before using.
• If there is any issue, stop using the massager immediately
and contact MedMassager™ for repair.
• This massager uses vibration. Pay attention to your surroundings.
1. Connect the power cord to the charging port and plug into the wall.
2. Once charging begins, one indicator light should be illuminated.
Battery is fully-charged when all four indicator lights are on.
3. After charging, please unplug the unit before use.
safety guidelines
Carefully read all guidelines before using.
THIS MASSAGER IS NOT A TOY. ADULT SUPERVISION IS NECESSARY.
THIS MASSAGER IS NOT WATERPROOF.
• To reduce the risk of electric shock, always unplug the unit from the
electrical outlet immediately after using and before cleaning.
• DO NOT reach for the unit if it has fallen into water.
• DO NOT use while bathing or showering.
• DO NOT place or store the unit where it can fall or be pulled into water.
• DO NOT drop water or other liquids onto the unit.
• DO NOT touch the massager with wet hands to avoid electric shock, product
malfunction or accident.
• Turn off the massager before unplugging.
• Before each use, check the power supply cord and be sure that every
part is in good condition. All parts must be firmly assembled.
• To disconnect, turn all controls to the OFF position, then remove the plug from
the outlet.
• If the unit is damaged or not working properly, contact MedMassager™ for service or
repair. DO NOT open the unit to service it yourself.
• DO NOT use this unit if you have a serious disease, inflammation of the skin,
hemorrhage tendencies, or if pregnant, unless otherwise directed by your physician.
• Use common sense when operating this unit. It is an electrical device and if used
improperly may cause injury, or even death.
• As with any health issue, always consult with your doctor if you are unsure about
a change in your routine.
• To reduce the risk of burns, fire, electric shock or injury to persons, the unit should
never be left unattended when plugged in. Unplug the unit when not in use.
• Close supervision is necessary when the unit is used by children or people
with disabilities.
• Use the unit only as described in this manual. Do not use attachments unless
supplied by MedMassager™ and intended for use with this product.
• Never operate this unit if it has a damaged cord or plug.
• DO NOT attempt to clean or lubricate the internal parts.
• DO NOT modify or disassemble the massager.
• Store in a cool, dry, lint and dust-free place.
If you have tried all troubleshooting options and nothing is working,
please contact MedMassager™ for further assistance.
product care
owner’s manual
rollvibe max massage roller
1
2
3
4
5
6
the amount of electricity AC 100-240V (50/60 Hz) 0.28A
DC9V 1000 mApower supply • DO NOT allow product to get wet.
• Unplug unit when not in use.
• Use a dry cloth to wipe clean.
• Unplug unit after it is fully charged.
• If the unit is unused for an extended period of time,
store it in a cool, dry place.
troublesho oting
problem
The massager does not
vibrate even if the
power button is pressed.
troubleshooting
• The massager and power adapter
are still connected.
• The battery needs to be recharged.
Note: The vibration function cannot
be used during charging.
Vibration intensity
has weakened.
• There is insufficient power and
the battery needs to be recharged.
Vibration only lasts a
few minutes, even after
a full charge.
• Extremely low or high ambient temperatures
can cause the product to malfunction. Please
use it within the recommended ambient
temperature range of 50° F to 104° F.
• The battery needs to be replaced.
Consult MedMassager™.
Note: DO NOT replace the battery yourself.
Doing so may result in damage to the product.
The massager suddenly
stopped working.
• The product stops automatically
after 10 minutes.
There is an abnormal noise
while using the massager.
• The product will emit an action sound
when vibrating.
specifications
product name rollvibe max massage roller
battery specification DC 7.4V 2200mAh
charging time approx. 3.5 hours (full charge)
full discharge time 50 minutes or 5 cycles of 10 minutes
vibration revolutions
(rate per minute)
1st gear motor speed: 2300RPM
2nd gear motor speed: 2700RPM
3rd gear motor speed: 3100RPM
4th gear motor speed: 3700RM
auto shut-off time 10 minutes
ambient temperature 50° F to 104° F
maximum weight 150kg or 330lbs
product accessories power adapter and manual
manufacturing origin China
The actual time and number of uses depends on the use environment.
vibration modes
1. Press the power button to turn on the unit.
The battery indicator lights will show the current power level.
2. Press the power button again to change the vibration setting.
The vibration level indicator lights will show the current strength level.
To increase vibration setting, continue to press the power button until
the desired level is reached.
3. To shut down the unit, press the power button until you cycle through
all four vibration settings.
The RollVibe Max Massage Roller oers four vibration seings.
You can make a selection by pressing the power buon.
The vibration function will automatically shut-off after 10 minutes.
Using this massager for longer periods of time may result in injury.
intensity 1
intensity 2 intensity 4
intensity 3
AC
charger
power supply
LED indicator lights
power button
charging port
charging method
before use
charger
charging port
• Make sure the massager is not damaged before use.
• Charge fully before using.
• If there is any issue, stop using the massager immediately
and contact MedMassager™ for repair.
• This massager uses vibration. Pay attention to your surroundings.
1. Connect the power cord to the charging port and plug into the wall.
2. Once charging begins, one indicator light should be illuminated.
Battery is fully-charged when all four indicator lights are on.
3. After charging, please unplug the unit before use.
safety guidelines
Carefully read all guidelines before using.
THIS MASSAGER IS NOT A TOY. ADULT SUPERVISION IS NECESSARY.
THIS MASSAGER IS NOT WATERPROOF.
• To reduce the risk of electric shock, always unplug the unit from the
electrical outlet immediately after using and before cleaning.
• DO NOT reach for the unit if it has fallen into water.
• DO NOT use while bathing or showering.
• DO NOT place or store the unit where it can fall or be pulled into water.
• DO NOT drop water or other liquids onto the unit.
• DO NOT touch the massager with wet hands to avoid electric shock, product
malfunction or accident.
• Turn off the massager before unplugging.
• Before each use, check the power supply cord and be sure that every
part is in good condition. All parts must be firmly assembled.
• To disconnect, turn all controls to the OFF position, then remove the plug from
the outlet.
• If the unit is damaged or not working properly, contact MedMassager™ for service or
repair. DO NOT open the unit to service it yourself.
• DO NOT use this unit if you have a serious disease, inflammation of the skin,
hemorrhage tendencies, or if pregnant, unless otherwise directed by your physician.
• Use common sense when operating this unit. It is an electrical device and if used
improperly may cause injury, or even death.
• As with any health issue, always consult with your doctor if you are unsure about
a change in your routine.
• To reduce the risk of burns, fire, electric shock or injury to persons, the unit should
never be left unattended when plugged in. Unplug the unit when not in use.
• Close supervision is necessary when the unit is used by children or people
with disabilities.
• Use the unit only as described in this manual. Do not use attachments unless
supplied by MedMassager™ and intended for use with this product.
• Never operate this unit if it has a damaged cord or plug.
• DO NOT attempt to clean or lubricate the internal parts.
• DO NOT modify or disassemble the massager.
• Store in a cool, dry, lint and dust-free place.
If you have tried all troubleshooting options and nothing is working,
please contact MedMassager™ for further assistance.
product care
owner’s manual
rollvibe max massage roller
1
2 3
4
5
6
the amount of electricity AC 100-240V (50/60 Hz) 0.28A
DC9V 1000 mApower supply • DO NOT allow product to get wet.
• Unplug unit when not in use.
• Use a dry cloth to wipe clean.
• Unplug unit after it is fully charged.
• If the unit is unused for an extended period of time,
store it in a cool, dry place.
troublesho oting
problem
The massager does not
vibrate even if the
power button is pressed.
troubleshooting
• The massager and power adapter
are still connected.
• The battery needs to be recharged.
Note: The vibration function cannot
be used during charging.
Vibration intensity
has weakened.
• There is insufficient power and
the battery needs to be recharged.
Vibration only lasts a
few minutes, even after
a full charge.
• Extremely low or high ambient temperatures
can cause the product to malfunction. Please
use it within the recommended ambient
temperature range of 50° F to 104° F.
• The battery needs to be replaced.
Consult MedMassager™.
Note: DO NOT replace the battery yourself.
Doing so may result in damage to the product.
The massager suddenly
stopped working.
• The product stops automatically
after 10 minutes.
There is an abnormal noise
while using the massager.
• The product will emit an action sound
when vibrating.
specifications
product name rollvibe max massage roller
battery specification DC 7.4V 2200mAh
charging time approx. 3.5 hours (full charge)
full discharge time 50 minutes or 5 cycles of 10 minutes
vibration revolutions
(rate per minute)
1st gear motor speed: 2300RPM
2nd gear motor speed: 2700RPM
3rd gear motor speed: 3100RPM
4th gear motor speed: 3700RM
auto shut-off time 10 minutes
ambient temperature 50° F to 104° F
maximum weight 150kg or 330lbs
product accessories power adapter and manual
manufacturing origin China
The actual time and number of uses depends on the use environment.
vibration modes
1. Press the power button to turn on the unit.
The battery indicator lights will show the current power level.
2. Press the power button again to change the vibration setting.
The vibration level indicator lights will show the current strength level.
To increase vibration setting, continue to press the power button until
the desired level is reached.
3. To shut down the unit, press the power button until you cycle through
all four vibration settings.
The RollVibe Max Massage Roller oers four vibration seings.
You can make a selection by pressing the power buon.
The vibration function will automatically shut-off after 10 minutes.
Using this massager for longer periods of time may result in injury.
intensity 1
intensity 2 intensity 4
intensity 3
AC
charger
power supply
LED indicator lights
power button
charging port
charging method
before use
charger
charging port
• Make sure the massager is not damaged before use.
• Charge fully before using.
• If there is any issue, stop using the massager immediately
and contact MedMassager™ for repair.
• This massager uses vibration. Pay attention to your surroundings.
1. Connect the power cord to the charging port and plug into the wall.
2. Once charging begins, one indicator light should be illuminated.
Battery is fully-charged when all four indicator lights are on.
3. After charging, please unplug the unit before use.
safety guidelines
Carefully read all guidelines before using.
THIS MASSAGER IS NOT A TOY. ADULT SUPERVISION IS NECESSARY.
THIS MASSAGER IS NOT WATERPROOF.
• To reduce the risk of electric shock, always unplug the unit from the
electrical outlet immediately after using and before cleaning.
• DO NOT reach for the unit if it has fallen into water.
• DO NOT use while bathing or showering.
• DO NOT place or store the unit where it can fall or be pulled into water.
• DO NOT drop water or other liquids onto the unit.
• DO NOT touch the massager with wet hands to avoid electric shock, product
malfunction or accident.
• Turn off the massager before unplugging.
• Before each use, check the power supply cord and be sure that every
part is in good condition. All parts must be firmly assembled.
• To disconnect, turn all controls to the OFF position, then remove the plug from
the outlet.
• If the unit is damaged or not working properly, contact MedMassager™ for service or
repair. DO NOT open the unit to service it yourself.
• DO NOT use this unit if you have a serious disease, inflammation of the skin,
hemorrhage tendencies, or if pregnant, unless otherwise directed by your physician.
• Use common sense when operating this unit. It is an electrical device and if used
improperly may cause injury, or even death.
• As with any health issue, always consult with your doctor if you are unsure about
a change in your routine.
• To reduce the risk of burns, fire, electric shock or injury to persons, the unit should
never be left unattended when plugged in. Unplug the unit when not in use.
• Close supervision is necessary when the unit is used by children or people
with disabilities.
• Use the unit only as described in this manual. Do not use attachments unless
supplied by MedMassager™ and intended for use with this product.
• Never operate this unit if it has a damaged cord or plug.
• DO NOT attempt to clean or lubricate the internal parts.
• DO NOT modify or disassemble the massager.
• Store in a cool, dry, lint and dust-free place.
If you have tried all troubleshooting options and nothing is working,
please contact MedMassager™ for further assistance.
product care
owner’s manual
rollvibe max massage roller
1
2 3 4
5
6
the amount of electricity AC 100-240V (50/60 Hz) 0.28A
DC9V 1000 mApower supply • DO NOT allow product to get wet.
• Unplug unit when not in use.
• Use a dry cloth to wipe clean.
• Unplug unit after it is fully charged.
• If the unit is unused for an extended period of time,
store it in a cool, dry place.
troublesho oting
problem
The massager does not
vibrate even if the
power button is pressed.
troubleshooting
• The massager and power adapter
are still connected.
• The battery needs to be recharged.
Note: The vibration function cannot
be used during charging.
Vibration intensity
has weakened.
• There is insufficient power and
the battery needs to be recharged.
Vibration only lasts a
few minutes, even after
a full charge.
• Extremely low or high ambient temperatures
can cause the product to malfunction. Please
use it within the recommended ambient
temperature range of 50° F to 104° F.
• The battery needs to be replaced.
Consult MedMassager™.
Note: DO NOT replace the battery yourself.
Doing so may result in damage to the product.
The massager suddenly
stopped working.
• The product stops automatically
after 10 minutes.
There is an abnormal noise
while using the massager.
• The product will emit an action sound
when vibrating.
specifications
product name rollvibe max massage roller
battery specification DC 7.4V 2200mAh
charging time approx. 3.5 hours (full charge)
full discharge time 50 minutes or 5 cycles of 10 minutes
vibration revolutions
(rate per minute)
1st gear motor speed: 2300RPM
2nd gear motor speed: 2700RPM
3rd gear motor speed: 3100RPM
4th gear motor speed: 3700RM
auto shut-off time 10 minutes
ambient temperature 50° F to 104° F
maximum weight 150kg or 330lbs
product accessories power adapter and manual
manufacturing origin China
The actual time and number of uses depends on the use environment.
vibration modes
1. Press the power button to turn on the unit.
The battery indicator lights will show the current power level.
2. Press the power button again to change the vibration setting.
The vibration level indicator lights will show the current strength level.
To increase vibration setting, continue to press the power button until
the desired level is reached.
3. To shut down the unit, press the power button until you cycle through
all four vibration settings.
The RollVibe Max Massage Roller oers four vibration seings.
You can make a selection by pressing the power buon.
The vibration function will automatically shut-off after 10 minutes.
Using this massager for longer periods of time may result in injury.
intensity 1
intensity 2 intensity 4
intensity 3
AC
charger
power supply
LED indicator lights
power button
charging port
charging method
before use
charger
charging port
• Make sure the massager is not damaged before use.
• Charge fully before using.
• If there is any issue, stop using the massager immediately
and contact MedMassager™ for repair.
• This massager uses vibration. Pay attention to your surroundings.
1. Connect the power cord to the charging port and plug into the wall.
2. Once charging begins, one indicator light should be illuminated.
Battery is fully-charged when all four indicator lights are on.
3. After charging, please unplug the unit before use.
safety guidelines
Carefully read all guidelines before using.
THIS MASSAGER IS NOT A TOY. ADULT SUPERVISION IS NECESSARY.
THIS MASSAGER IS NOT WATERPROOF.
• To reduce the risk of electric shock, always unplug the unit from the
electrical outlet immediately after using and before cleaning.
• DO NOT reach for the unit if it has fallen into water.
• DO NOT use while bathing or showering.
• DO NOT place or store the unit where it can fall or be pulled into water.
• DO NOT drop water or other liquids onto the unit.
• DO NOT touch the massager with wet hands to avoid electric shock, product
malfunction or accident.
• Turn off the massager before unplugging.
• Before each use, check the power supply cord and be sure that every
part is in good condition. All parts must be firmly assembled.
• To disconnect, turn all controls to the OFF position, then remove the plug from
the outlet.
• If the unit is damaged or not working properly, contact MedMassager™ for service or
repair. DO NOT open the unit to service it yourself.
• DO NOT use this unit if you have a serious disease, inflammation of the skin,
hemorrhage tendencies, or if pregnant, unless otherwise directed by your physician.
• Use common sense when operating this unit. It is an electrical device and if used
improperly may cause injury, or even death.
• As with any health issue, always consult with your doctor if you are unsure about
a change in your routine.
• To reduce the risk of burns, fire, electric shock or injury to persons, the unit should
never be left unattended when plugged in. Unplug the unit when not in use.
• Close supervision is necessary when the unit is used by children or people
with disabilities.
• Use the unit only as described in this manual. Do not use attachments unless
supplied by MedMassager™ and intended for use with this product.
• Never operate this unit if it has a damaged cord or plug.
• DO NOT attempt to clean or lubricate the internal parts.
• DO NOT modify or disassemble the massager.
• Store in a cool, dry, lint and dust-free place.
If you have tried all troubleshooting options and nothing is working,
please contact MedMassager™ for further assistance.
product care
owner’s manual
rollvibe max massage roller
1
2 3 4
5
6
the amount of electricity AC 100-240V (50/60 Hz) 0.28A
DC9V 1000 mApower supply
• DO NOT allow product to get wet.
• Unplug unit when not in use.
• Use a dry cloth to wipe clean.
• Unplug unit after it is fully charged.
• If the unit is unused for an extended period of time,
store it in a cool, dry place.
troublesho oting
problem
The massager does not
vibrate even if the
power button is pressed.
troubleshooting
• The massager and power adapter
are still connected.
• The battery needs to be recharged.
Note: The vibration function cannot
be used during charging.
Vibration intensity
has weakened.
• There is insufficient power and
the battery needs to be recharged.
Vibration only lasts a
few minutes, even after
a full charge.
• Extremely low or high ambient temperatures
can cause the product to malfunction. Please
use it within the recommended ambient
temperature range of 50° F to 104° F.
• The battery needs to be replaced.
Consult MedMassager™.
Note: DO NOT replace the battery yourself.
Doing so may result in damage to the product.
The massager suddenly
stopped working.
• The product stops automatically
after 10 minutes.
There is an abnormal noise
while using the massager.
• The product will emit an action sound
when vibrating.
specifications
product name rollvibe max massage roller
battery specification DC 7.4V 2200mAh
charging time approx. 3.5 hours (full charge)
full discharge time 50 minutes or 5 cycles of 10 minutes
vibration revolutions
(rate per minute)
1st gear motor speed: 2300RPM
2nd gear motor speed: 2700RPM
3rd gear motor speed: 3100RPM
4th gear motor speed: 3700RM
auto shut-off time 10 minutes
ambient temperature 50° F to 104° F
maximum weight 150kg or 330lbs
product accessories power adapter and manual
manufacturing origin China
The actual time and number of uses depends on the use environment.
vibration modes
1. Press the power button to turn on the unit.
The battery indicator lights will show the current power level.
2. Press the power button again to change the vibration setting.
The vibration level indicator lights will show the current strength level.
To increase vibration setting, continue to press the power button until
the desired level is reached.
3. To shut down the unit, press the power button until you cycle through
all four vibration settings.
The RollVibe Max Massage Roller oers four vibration seings.
You can make a selection by pressing the power buon.
The vibration function will automatically shut-off after 10 minutes.
Using this massager for longer periods of time may result in injury.
intensity 1
intensity 2 intensity 4
intensity 3
AC
charger
power supply
LED indicator lights
power button
charging port
charging method
before use
charger
charging port
• Make sure the massager is not damaged before use.
• Charge fully before using.
• If there is any issue, stop using the massager immediately
and contact MedMassager™ for repair.
• This massager uses vibration. Pay attention to your surroundings.
1. Connect the power cord to the charging port and plug into the wall.
2. Once charging begins, one indicator light should be illuminated.
Battery is fully-charged when all four indicator lights are on.
3. After charging, please unplug the unit before use.
safety guidelines
Carefully read all guidelines before using.
THIS MASSAGER IS NOT A TOY. ADULT SUPERVISION IS NECESSARY.
THIS MASSAGER IS NOT WATERPROOF.
• To reduce the risk of electric shock, always unplug the unit from the
electrical outlet immediately after using and before cleaning.
• DO NOT reach for the unit if it has fallen into water.
• DO NOT use while bathing or showering.
• DO NOT place or store the unit where it can fall or be pulled into water.
• DO NOT drop water or other liquids onto the unit.
• DO NOT touch the massager with wet hands to avoid electric shock, product
malfunction or accident.
• Turn off the massager before unplugging.
• Before each use, check the power supply cord and be sure that every
part is in good condition. All parts must be firmly assembled.
• To disconnect, turn all controls to the OFF position, then remove the plug from
the outlet.
• If the unit is damaged or not working properly, contact MedMassager™ for service or
repair. DO NOT open the unit to service it yourself.
• DO NOT use this unit if you have a serious disease, inflammation of the skin,
hemorrhage tendencies, or if pregnant, unless otherwise directed by your physician.
• Use common sense when operating this unit. It is an electrical device and if used
improperly may cause injury, or even death.
• As with any health issue, always consult with your doctor if you are unsure about
a change in your routine.
• To reduce the risk of burns, fire, electric shock or injury to persons, the unit should
never be left unattended when plugged in. Unplug the unit when not in use.
• Close supervision is necessary when the unit is used by children or people
with disabilities.
• Use the unit only as described in this manual. Do not use attachments unless
supplied by MedMassager™ and intended for use with this product.
• Never operate this unit if it has a damaged cord or plug.
• DO NOT attempt to clean or lubricate the internal parts.
• DO NOT modify or disassemble the massager.
• Store in a cool, dry, lint and dust-free place.
If you have tried all troubleshooting options and nothing is working,
please contact MedMassager™ for further assistance.
product care
owner’s manual
rollvibe max massage roller
1
2 3 4
5
6
the amount of electricity AC 100-240V (50/60 Hz) 0.28A
DC9V 1000 mApower supply • DO NOT allow product to get wet.
• Unplug unit when not in use.
• Use a dry cloth to wipe clean.
• Unplug unit after it is fully charged.
• If the unit is unused for an extended period of time,
store it in a cool, dry place.
troublesho oting
problem
The massager does not
vibrate even if the
power button is pressed.
troubleshooting
• The massager and power adapter
are still connected.
• The battery needs to be recharged.
Note: The vibration function cannot
be used during charging.
Vibration intensity
has weakened.
• There is insufficient power and
the battery needs to be recharged.
Vibration only lasts a
few minutes, even after
a full charge.
• Extremely low or high ambient temperatures
can cause the product to malfunction. Please
use it within the recommended ambient
temperature range of 50° F to 104° F.
• The battery needs to be replaced.
Consult MedMassager™.
Note: DO NOT replace the battery yourself.
Doing so may result in damage to the product.
The massager suddenly
stopped working.
• The product stops automatically
after 10 minutes.
There is an abnormal noise
while using the massager.
• The product will emit an action sound
when vibrating.
specifications
product name rollvibe max massage roller
battery specification DC 7.4V 2200mAh
charging time approx. 3.5 hours (full charge)
full discharge time 50 minutes or 5 cycles of 10 minutes
vibration revolutions
(rate per minute)
1st gear motor speed: 2300RPM
2nd gear motor speed: 2700RPM
3rd gear motor speed: 3100RPM
4th gear motor speed: 3700RM
auto shut-off time 10 minutes
ambient temperature 50° F to 104° F
maximum weight 150kg or 330lbs
product accessories power adapter and manual
manufacturing origin China
The actual time and number of uses depends on the use environment.
vibration modes
1. Press the power button to turn on the unit.
The battery indicator lights will show the current power level.
2. Press the power button again to change the vibration setting.
The vibration level indicator lights will show the current strength level.
To increase vibration setting, continue to press the power button until
the desired level is reached.
3. To shut down the unit, press the power button until you cycle through
all four vibration settings.
The RollVibe Max Massage Roller oers four vibration seings.
You can make a selection by pressing the power buon.
The vibration function will automatically shut-off after 10 minutes.
Using this massager for longer periods of time may result in injury.
intensity 1
intensity 2 intensity 4
intensity 3
AC
charger
power supply
LED indicator lights
power button
charging port
charging method
before use
charger
charging port
• Make sure the massager is not damaged before use.
• Charge fully before using.
• If there is any issue, stop using the massager immediately
and contact MedMassager™ for repair.
• This massager uses vibration. Pay attention to your surroundings.
1. Connect the power cord to the charging port and plug into the wall.
2. Once charging begins, one indicator light should be illuminated.
Battery is fully-charged when all four indicator lights are on.
3. After charging, please unplug the unit before use.
safety guidelines
Carefully read all guidelines before using.
THIS MASSAGER IS NOT A TOY. ADULT SUPERVISION IS NECESSARY.
THIS MASSAGER IS NOT WATERPROOF.
• To reduce the risk of electric shock, always unplug the unit from the
electrical outlet immediately after using and before cleaning.
• DO NOT reach for the unit if it has fallen into water.
• DO NOT use while bathing or showering.
• DO NOT place or store the unit where it can fall or be pulled into water.
• DO NOT drop water or other liquids onto the unit.
• DO NOT touch the massager with wet hands to avoid electric shock, product
malfunction or accident.
• Turn off the massager before unplugging.
• Before each use, check the power supply cord and be sure that every
part is in good condition. All parts must be firmly assembled.
• To disconnect, turn all controls to the OFF position, then remove the plug from
the outlet.
• If the unit is damaged or not working properly, contact MedMassager™ for service or
repair. DO NOT open the unit to service it yourself.
• DO NOT use this unit if you have a serious disease, inflammation of the skin,
hemorrhage tendencies, or if pregnant, unless otherwise directed by your physician.
• Use common sense when operating this unit. It is an electrical device and if used
improperly may cause injury, or even death.
• As with any health issue, always consult with your doctor if you are unsure about
a change in your routine.
• To reduce the risk of burns, fire, electric shock or injury to persons, the unit should
never be left unattended when plugged in. Unplug the unit when not in use.
• Close supervision is necessary when the unit is used by children or people
with disabilities.
• Use the unit only as described in this manual. Do not use attachments unless
supplied by MedMassager™ and intended for use with this product.
• Never operate this unit if it has a damaged cord or plug.
• DO NOT attempt to clean or lubricate the internal parts.
• DO NOT modify or disassemble the massager.
• Store in a cool, dry, lint and dust-free place.
If you have tried all troubleshooting options and nothing is working,
please contact MedMassager™ for further assistance.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8

medmassager rollvibe max massage roller Owner's manual

rollvibe max massage roller
Brand
medmassager
Model
rollvibe max massage roller
Type
Owner's manual

MedMassager RollVibe Max Massage Roller is a handheld massaging device that offers four intensity settings and provides targeted relief to sore muscles. With a powerful motor that delivers up to 3700 revolutions per minute, it promotes relaxation and helps enhance blood circulation. The compact design and rechargeable battery make it an ideal companion for post-workout recovery or soothing away tension after a long day.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Other documents