SOLID WOOD FURNITURE
Chromatic aberration
All products are taken inkind. Due to factors
such as light and display, there may be slight
differences between the actual object and the
picture. The trees grow naturally. The in’ uence of
the environment may also cause uneven wood
color, which may be unavoidable. If you mind,
please be careful to order.
Cracked
Because the wood used is all-natural solid
wood, the wood contains more or less water.
Due to the principle of swelling and shrinking,
the spliced solid wood will crack. It cannot
be avoided; but we upgraded the splicing
technology- while greatly reducing the cracking
situation, it still retains the characteristics of pure
solid wood furniture; of course, the cost and
material cost are also relatively increased, thus
the price will be higher than before.
Wood grain scars
Because what we used are all-natural solid
wood, the scarring of trees is inevitable during
the growth process, and the wood grain is the
same. There are no two trees that are exactly
the same in the world, which will also cause
different textures. All we used are pure solid
wood, so this aspect cannot be avoided for the
time being, please also be aware.
Solid wood furniture is made of natural wood, which has natural attributes. Although the material selection process is strictly, the natural attributes
in the above picture cannot be avoided. This is not a quality problem.
Cleaning and maintenance of furniture
surface
At intervals, use cotton silk with 90% dry to
wipe the dust off the furniture, and then use a
clean dry soft cotton cloth to dry it. Avoid using
alcohol, gasoline, detergent or other chemical
solvents to remove stains. If there are stains on
the surface of the furniture, use warm tea or milk
to gently remove the stains. Do not use brute
force.
Avoid scratches by hard objects
In daily life, try to avoid hard objects such as
cleaning tools and tableware from touching the
furniture to avoid knocking injuries.
In winter, place the furniture at a distance of
about 1M from the heating stream. Long-term
high-temperature barbecue is easy to cause local
dry cracking and deformation of wood, also will
cause local deterioration of paint ‘ lm.
Avoid humid environment
In summer, if there is an indoor tide, it is
advisable to use thin glue to separate the parts
of the furniture in contact with the ground, and at
the same time, keep the furniture against the wall
with a distance of 0.5-1 cm.
Keep away from heat
Care and maintenance
Avoid direct sunlight
Should try to avoid the outdoor sunlight for
a long time on the furniture, when the sun is
strong, transparent gauze curtains can be used
to isolate the direct sunlight, which will not affect
the indoor lighting also have a protect for the
indoor furniture.
Avoid dragging furniture
When moving the furniture, lift the furniture
and then move it. Do not drag it directly on
the ground to prevent the structural parts of the
furniture from cracking.