UFP-Edge UFP EDGE 444723 Native Woods Shiplap Touch Up Paint Kit Operating instructions

Native Woods Shiplap Touch Up

Paint Kit Instructions

Touch up kit includes:

∙ One 4 oz. touch up bottle

∙ Two llable dauber markers

∙ Two llable valve markers

∙ Replacement dauber heads and marker

∙ Four plastic pipettes for transferring material into markers

Dauber Bottle

Shake bottle well. To apply with dauber provided, stamp dauber on scrap piece

until material ows. Stroke in direction of larger repair or edge.

To remove material for transfer into marker use the pipettes included.

Replace cap on bottle to prevent product from drying out.

Dauber Marker

For minor restoration of nished boards and edges. Once marker is lled,

stamp dauber on scrap piece until marker ows through the nib. Stroke in

direction of scratch or repair area.

Marker

For minor restoration of nished boards and edges. Once marker is lled,

compress nib of marker with nib pointing up. Test on scrap piece by compressing

nib until marker ows through the nib. Stroke in direction of scratch or repair area.

1251 09/22

This manual is also suitable for

Download PDF