2. Oatey
  3. Quiet Pipes Hammer Arrestor

Oatey Quiet Pipes Hammer Arrestor, 38600 Installation guide

  • Hello! I'm a chat assistant and I've reviewed the user guide for the Oatey QUIET PIPES Hammer Arrestor. This document provides clear instructions on how to install the arrestor, including steps for connecting it to a valve, attaching a water supply hose, and then checking for leaks. I am ready to answer your questions about the installation process or any other aspects of this product.
  • What is the first step in installing the water arrestor?
    What should I do after connecting the water supply hose?
    Where do you screw the water arrestor?
INSTRUCTION GUIDE
2
3
4
1 Turn off the water supply to the valve.
Screw the water arrestor to the valve threads.
Screw the water supply hose into the water arrestor
and tighten.
Turn the water on and check for leaks.
Oatey.com
©2021 Oatey SCS. All Rights Reserved. This information is based on data believed to be reliable but Oatey makes no warranties, express or implied, as to its accuracy and assumes no liability arising out
of its use. The data listed falls within the normal range of product properties but should not be used to establish specication limits or used alone as the basis of design. Oatey’s liability to purchasers is
expressly limited to the terms and conditions of sale. Oatey is trademark of Oatey Co. All other trademarks can be found www.Oatey.com.
QUIET PIPES® HAMMER ARRESTOR
/