Schumacher Electric SC1389SC1389 Owner's manual

Brand: Schumacher Electric

Model: SC1389SC1389

Type: Owner's manual

Onboard Marine Battery Charger

Cargador de batería para embarcaciones

Chargeur de batterie marine

OWNERS MANUAL / MANUAL DEL USUARIO / GUIDE D’UTILISATION

3-3 3-2 3-1

PLEASE SAVE THIS OWNERS MANUAL AND READ BEFORE EACH USE. This manual will explain how

to use the charger safely and effectively. Please read and follow these instructions and precautions carefully.

POR FAVOR CONSERVE ESTE MANUAL DEL USUARIO Y LEALO ANTES DE CADA USO. En este manual

le explica cómo utilizar el cargador de manera segura y conable. Por favor, lea y siga las siguientes instrucciones

y precauciones.

ESSAYER DE GARDER LE MANUEL D’INSTRUCTIONS ET LE LIRE AVANT CHAQUE UTILISATION.

Ce manuel explique comment utiliser le chargeur d’une façon sûre et efcace. S’il vous plaît lisez et suivez

ces instructions et précautions.

0099002264E-00

CONTENTS

IMPORTANT SAFETY INSTRUCTIONS – SAVE THESE INSTRUCTIONS ......................................................................................................................................................3

PERSONAL SAFETY PRECAUTIONS ............................................................................................................................................................................................................... 3

PREPARING TO CHARGE .................................................................................................................................................................................................................................3

CHARGER LOCATION ....................................................................................................................................................................................................................................... 4

GROUNDING AND AC POWER CORD CONNECTIONS .................................................................................................................................................................................. 4

ASSEMBLY INSTRUCTIONS .............................................................................................................................................................................................................................4

MOUNTING INSTRUCTIONS .............................................................................................................................................................................................................................4

DC WIRING DETAIL ...........................................................................................................................................................................................................................................4

INLINE FUSES ....................................................................................................................................................................................................................................................5

CONTROL PANEL ..............................................................................................................................................................................................................................................5

OPERATING INSTRUCTIONS ...........................................................................................................................................................................................................................5

MAINTENANCE AND CARE ...............................................................................................................................................................................................................................6

SPECIFICATIONS ..............................................................................................................................................................................................................................................6

TROUBLESHOOTING ........................................................................................................................................................................................................................................ 6

BEFORE RETURNING FOR REPAIRS .............................................................................................................................................................................................................. 6

LIMITED WARRANTY .........................................................................................................................................................................................................................................6

CONTENIDOS

INSTRUCCIONES IMPORTANTES DE SEGURIDAD – GUARDE ESTAS INSTRUCCIONES .........................................................................................................................7

PRECAUCIONES DE SEGURIDAD PERSONAL ...............................................................................................................................................................................................7

PREPARACIÓN PARA LA CARGA .....................................................................................................................................................................................................................7

UBICACIÓN DEL CARGADOR...........................................................................................................................................................................................................................8

CONEXIONES A TIERRA Y ENERGÍA DE CA ...................................................................................................................................................................................................8

INSTRUCCIONES PARA LA INSTALACIÓN ......................................................................................................................................................................................................8

INSTRUCCIONES DE MONTAJE ......................................................................................................................................................................................................................8

DETALLES DE CABLES DE CD .........................................................................................................................................................................................................................8

FUSIBLES EN LÍNEA ..........................................................................................................................................................................................................................................9

PANEL DE CONTROL ........................................................................................................................................................................................................................................9

INSTRUCCIONES DE OPERACIÓN .................................................................................................................................................................................................................. 9

MANTENIMIENTO Y CUIDADO .......................................................................................................................................................................................................................10

ESPECIFICACIONES ....................................................................................................................................................................................................................................... 10

LOCALIZACIÓN Y SOLUCIÓN DE PROBLEMAS ...........................................................................................................................................................................................10

ANTES DE DEVOLVER A REPARACIONES ....................................................................................................................................................................................................10

GARANTÍA LIMITADA ....................................................................................................................................................................................................................................... 10

TABLE DES MATIÈRES

CONSIGNES DE SÉCURITÉ IMPORTANTES – CONSERVER CES CONSIGNES ....................................................................................................................................... 11

MESURES DE SÉCURITÉ PERSONNELLE .................................................................................................................................................................................................... 11

PRÉPARATION POUR LE CHARGEMENT ...................................................................................................................................................................................................... 11

EMPLACEMENT DU CHARGEUR ...................................................................................................................................................................................................................12

MISE À LA TERRE ET CORDON D’ÉNERGIE CA ...........................................................................................................................................................................................12

DIRECTIVES D’ASSEMBLAGE ........................................................................................................................................................................................................................12

INSTRUCTIONS DE MONTAGE ......................................................................................................................................................................................................................12

DÉTAILS DU CÂBLAGE EN CC ....................................................................................................................................................................................................................... 12

FUSIBLES EN LIGNE ....................................................................................................................................................................................................................................... 13

PANNEAU DE CONTRÔLE .............................................................................................................................................................................................................................. 13

CONSIGNES D’UTILISATION ..........................................................................................................................................................................................................................13

MAINTENANCE ET ENTRETIEN .....................................................................................................................................................................................................................14

SPÉCIFICATIONS ............................................................................................................................................................................................................................................14

TABLEAU DE DÉPANNAGE .............................................................................................................................................................................................................................14

AVANT DE RETOURNER POUR LES RÉPARATIONS ....................................................................................................................................................................................14

GARANTIE LIMITÉE ......................................................................................................................................................................................................................................... 14

• 3 •

0099002085-00

QUICK INSTRUCTIONS

• Connect black ring terminal to negative battery post, and red ring terminal to positive battery post. Plug charger into live AC power outlet.

• The

Power On and (last used) Battery Type LEDs will light (when used the rst time, the factory default setting is AGM).

• If battery type is not changed, charging starts automatically (for previously selected battery type) after 30 seconds, if connected to a battery.

•

To change battery type, press and hold

Select button for 3 seconds and then toggle to STD, AGM or GEL (OFF = bank is turned off).

The LED ashes for 3 seconds and then turns solid. Charging begins automatically in 5 seconds, if connected to a battery.

• The

LEDs indicate charging status. When battery is fully charged, all four LEDs will be solid.

•

Red LED ashing = Reversed connections.

•

Red LED lit = Aborted charge (or) “OFF” is selected (or) Battery not connected

1. IMPORTANT SAFETY INSTRUCTIONS – SAVE THESE INSTRUCTIONS

1.1 SAVE THESE INSTRUCTIONS – This manual contains important safety and operating instructions.

1.2 This charger is not intended for use by children.

1.3 Do not expose the charger to rain or snow.

1.4 Use of an attachment not recommended or sold by the battery charger manufacturer may result in a risk of re, electric shock or injury to persons.

1.5 To reduce the risk of damage to electric plug and cord, pull by the plug rather than the cord when disconnecting charger.

1.6 An extension cord should not be used unless absolutely necessary. Use of improper extension cord could result in a risk of re and electric shock. If an extension cord must be used, make sure:

• The pins on plug of extension cord are the same number, size and shape as those of plug on charger.

• The extension cord is properly wired and in good electrical condition.

• The wire size is large enough for AC ampere rating of charger as specied in section 5.

1.7 Do not operate charger with damaged cord or plug – replace the cord or plug immediately.

1.8 Do not operate charger if it has received a sharp blow, been dropped, or otherwise damaged in any way; take it to a qualied serviceman.

1.9 Do not disassemble charger; take it to a qualied serviceman when service or repair is required. Incorrect reassembly may result in a risk of electric shock or re.

1.10 To reduce risk of electric shock, unplug charger from outlet before attempting any maintenance or cleaning. Turning off controls will not reduce this risk.

1.11 WARNING: RISK OF EXPLOSIVE GASES.

a. WORKING IN VICINITY OF A LEAD-ACID BATTERY IS DANGEROUS. BATTERIES GENERATE EXPLOSIVE GASES DURING NORMAL BATTERY OPERATION.

FOR THIS REASON, IT IS OF UTMOST IMPORTANCE THAT YOU FOLLOW THE INSTRUCTIONS EACH TIME YOU USE THE CHARGER.

b. To reduce risk of battery explosion, follow these instructions and those published by battery manufacturer and manufacturer of any equipment you intend to use in

vicinity of battery. Review cautionary markings on these products and on engine.

2. PERSONAL SAFETY PRECAUTIONS

2.1 Consider having someone close enough by to come to your aid when you work near a lead-acid battery.

2.2 Have plenty of fresh water and soap nearby in case battery acid contacts skin, clothing, or eyes.

2.3 Wear complete eye protection and clothing protection. Avoid touching eyes while working near battery.

2.4 If battery acid contacts skin or clothing, wash immediately with soap and water. If acid enters eye, immediately ood eye with running cold water for at least 10 minutes and

get medical attention immediately.

2.5 NEVER smoke or allow a spark or ame in vicinity of battery or engine.

2.6 Be extra cautious to reduce risk of dropping a metal tool onto battery. It might spark or short-circuit battery or other electrical part that may cause explosion.

2.7 Remove personal metal items such as rings, bracelets, necklaces, and watches when working with a lead-acid battery. A lead-acid battery can produce a short-circuit

current high enough to weld a ring or the like to metal, causing a severe burn.

2.8 Use charger for charging only 12V LEAD-ACID (STD, AGM, gel or deep-cycle) rechargeable batteries. It is not intended to supply power to a low voltage electrical system other

than in a starter-motor application. Do not use battery charger for charging dry-cell batteries that are commonly used with home appliances. These batteries may burst and

cause injury to persons and damage to property.

2.9 NEVER charge a frozen battery.

3. PREPARING TO CHARGE

3.1 If necessary to remove battery from vehicle to charge, always remove grounded terminal from battery rst. Make sure all accessories in the vehicle are off, so as not to cause an arc.

3.2 Be sure area around battery is well ventilated while battery is being charged.

3.3 Clean battery terminals. Be careful to keep corrosion from coming in contact with eyes.

3.4 Add distilled water in each cell until battery acid reaches level specied by battery manufacturer. Do not overll. For a battery without removable cell caps, such as valve

regulated lead acid batteries, carefully follow manufacturer’s recharging instructions.

3.5 Study all battery manufacturer’s specic precautions while charging and recommended rates of charge.

3.6 Determine voltage of battery by referring to car owner’s manual and make sure that output voltage selector switch is set at correct voltage.

Onboard Marine Battery Charger

OWNERS MANUAL

PLEASE SAVE THIS OWNERS MANUAL AND READ BEFORE EACH USE. This manual will explain how to use the charger

safely and effectively. Please read and follow these instructions and precautions carefully.

3-3 3-2 3-1

• 4 •

4. CHARGER LOCATION

4.1 Locate charger as far away from battery as DC cables permit.

4.2 Never place charger directly above battery being charged; gases from battery will corrode and damage charger.

4.3 Never allow battery acid to drip on charger when reading electrolyte specic gravity or lling battery.

4.4 Do not operate charger in a closed-in area or restrict ventilation in any way.

4.5 Do not set a battery on top of charger.

5. GROUNDING AND AC POWER CORD CONNECTIONS

5.1 This battery charger is for use on a nominal 120 volt circuit. The plug must be plugged into an outlet that is properly installed and grounded in accordance with all local codes

and ordinances. The plug pins must t the receptacle (outlet). Do not use with an ungrounded system.

5.2 DANGER: Never alter the AC cord or plug provided – if it does not t the outlet, have a proper grounded outlet installed by a qualied electrician. An improper connection can

result in a risk of an electric shock or electrocution.

NOTE: Pursuant to Canadian Regulations, use of an adapter plug is not allowed in Canada. Use of an adapter plug in the United States is not recommended and should not be used.

5.3 USING AN EXTENSION CORD

The use of an extension cord is not recommended. If you must use an extension cord, follow these guidelines:

• Pins on plug of extension cord must be the same number, size, and shape as those of plug on charger.

• Ensure that the extension cord is properly wired and in good electrical condition.

• Wire size must be large enough for the AC ampere rating of charger, as specied:

Length of cord (feet) 25 50 100

AWG* size of cord 18 18 16

*AWG-American Wire Gauge

6. ASSEMBLY INSTRUCTIONS

6.1 Remove all cord wraps and uncoil the cables prior to using the battery charger.

7. MOUNTING INSTRUCTIONS

7.1 The charger may be permanently mounted and connected in three different ways:

• Flat mount (oor)

• Wall mount, horizontal position

• Wall mount, vertical position

7.2 When choosing a location:

• Do not restrict the airow under the charger. Do not mount the charger next to fuel tanks or below the waterline of the boat. The charger is rainproof and is approved for

mounting on the weatherdeck.

• To allow for proper air circulation, a minimum of four inches of unobstructed area must be permitted on all sides of the charger.

• Chose a location such that the six-foot cables can reach the battery(ies).

7.3 Four mounting holes have been provided for secure installation. Using the charger as a template, place the charger in the selected location and mark each of the four holes with

a pencil. In a well ventilated environment, drill the four holes using a #9 (7/32˝) drill bit for use with nuts and bolts OR with a 5/32˝ drill bit for use with #10 self tapping screws.

Use caution when drilling, to avoid drilling into wires or other components. Using #10 bolts, nuts and lockwashers, mount the charger with the LEDs facing up on a at vertical

surface, to allow for ventilation. Route the AC and DC cords to either end and avoid pinching them under the base. A sealant may be used to waterproof the screw holes.

8. DC WIRING DETAIL

When connecting the ring terminals to the battery, remove nuts on battery posts, place the ring terminal on corresponding positive and negative post, and replace each nut

tightly to ensure a good connection.

When connecting the ring terminals, connect the black lead to the negative battery post and the red lead to the positive battery post.

For 2 and 3-bank chargers: When connecting the charger to TWO and THREE batteries, connect the positive lead from charging bank one to the positive post of battery one.

Connect the negative lead from charging bank one to the negative post of battery one. Connect the leads from charging bank two to battery two, and three to battery three

in the same fashion.

NOTE: Removal of a strap between two batteries in a 24- or 36-Volt system is not necessary.

1 battery 3 batteries

STRAP

OPTIONAL

2 batteries

STRAP

OPTIONAL

• 5 •

9. INLINE FUSES

Inline fuses, located close to the ends of the red leads, protect the charger from extremely high voltage surges, lightning strikes or other high current surges. If a fuse

blows, replace only with an ATC-30 30A 32V blade fuse.

10. CONTROL PANEL

SELECT BUTTON – Press to select battery type or check battery type during charging.

LED INDICATORS

POWER ON (green) – The charger is connected to AC power.

CHARGING STATUS/BATTERY TYPE (green) –

Charging status:

After battery type has been selected and charging has begun, charging status is indicated from right to left, in 25% increments. The LEDs will blink and then turn solid, as

charging progresses.

The

LEDs of other banks which are not charging will be solid on, to show the percentage of those batteries.

100% 75% 50% 25%

STD AGM GEL OFF

Battery type:

To change the battery type, press and hold the

Select button for 3 seconds, and then toggle the button to select the desired battery type. For a deep-cycle battery, refer to

the battery manufacturer’s specications to determine the battery type. The LED will ash for 3 seconds, and then turn solid. If no battery type is selected, the “OFF” LED will

light and the bank will turn off. To check the battery type setting during charging, press the Select button.

(FLASHING RED) – The connections are reversed.

(SOLID RED) – The charger has detected one of the following problems:

• Aborted charge

• “OFF” is selected

• Battery not connected

See Troubleshooting for more information.

11. OPERATING INSTRUCTIONS

WARNING: A spark near the battery may cause an explosion.

CHARGING A BATTERY INSIDE THE BOAT

1. Turn off all the boat’s accessories.

2. Clean the battery terminals.

3. Make sure the charger is unplugged from the AC power outlet.

4. Lay the AC/DC cables away from any fan blades, belts, pulleys and other moving parts.

5. Connect the charger to up to three batteries, following the instructions listed in section 8.

6. Connect the charger to an electrical outlet.

7. The

Power On LED will light and the battery type LED for the previously selected type will be lit (the factory default battery type is AGM). If the battery type is not

changed, charging will start in 30 seconds, if connected to a battery.

8. To change the battery type, press and hold the

Select button for 3 seconds, and then toggle the button to select the desired battery type. The LED will ash

for 3 seconds, and then turn solid. NOTE: If no battery type is selected, the “OFF” LED and the red

LED will be lit (the bank is turned off).

9. If there is a battery connected to that bank, charging will begin in automatically, and the percentage LEDs will light, to indicate charging status.

NOTE: If a battery type is selected and no battery is connected, the battery type LED and the red

LED will be lit.

10. During charging, the four green LEDs will blink and then turn solid, from right to left, to indicate the progress of the charge. The higher percentage LED is blinking (the

charger is working to reach that percentage), and the lower percentage LEDs are solid on (the battery has reached that percentage of charge). When the battery is

fully charged, all four LEDs will be solid.

NOTE: To check the battery type setting during charging, press the Select button.

11. When the battery is fully charged, the charger will go into Maintain mode.

12. For 2 and 3-bank chargers: when charging multiple batteries, the charger will employ one bank at a time, with 15 minutes of charging for each bank.

13. When charging is complete, disconnect the charger from the AC power, remove the red (positive) ring terminal from the battery post, and then the black (negative) ring

terminal from the battery post.

REVERSED CONNECTIONS

If the connections are reversed, the red

LED will ash. When the connections are corrected, charging will begin automatically. If the connections are not corrected after

15 minutes, the charger will switch to the next bank in line and begin charging.

ABORTED CHARGE

If the charger has detected a problem with the battery and charging cannot be completed normally, charging will abort. When charging aborts, the charger’s output is shut

off and the red

LED will light. Do not continue attempting to charge the battery. Have the battery checked and replace, if necessary.

COMPLETION OF CHARGE

When the green 100% LED is lit, the battery is fully charged and the charger has switched to the Maintain Mode of operation.

MAINTAIN MODE (Float Mode Monitoring)

When the green 100% LED is lit, the charger has started Maintain Mode. In this mode, the charger keeps the battery fully charged by delivering a small current when

necessary. If the charger has to provide its maximum maintain current for a continuous 12 hour period, it will go into Abort mode. This is usually caused by a drain on the

battery or the battery could be bad. Make sure there are no loads on the battery. If there are, remove them. If there are none, have the battery checked or replaced.

• 6 •

12. MAINTENANCE AND CARE

A minimal amount of care can keep your battery charger working properly for years.

12.1 Clean the ring terminals each time you are nished charging. Wipe off any battery uid that may have come in contact with them, to prevent corrosion.

12.2 Occasionally cleaning the case of the charger with a soft cloth will keep the nish shiny and help prevent corrosion.

12.3 Coil the input and output cords neatly when storing the charger. This will help prevent accidental damage to the cords and charger.

12.4 Store the charger unplugged from the AC power outlet in an upright position.

12.5 Store inside, in a cool, dry place. Do not store the ring terminals on or around metal.

13. SPECIFICATIONS

Input ............................................................................................................................. 120V AC/60Hz, 3.7A

Output .....................................................................................................................................12V DC@15A

Ingress protection rating ........................................................................................................................IP65

14. TROUBLESHOOTING

PROBLEM POSSIBLE CAUSE SOLUTION

Correctly connected to battery, but not charging. Battery voltage is too low.

The bank is turned off (indicated by lit “OFF” and

LEDs).

Bad fuse on the leads.

The battery may be defective. Have the battery

checked and replace, if necessary.

Press the

Select button to select battery type;

charging will then start.

Replace the fuse.