SLIK 618-719 / LIGHTY POD III Owner's manual

  • Hello! I am an AI chatbot trained to assist you with the SLIK 618-719 / LIGHTY POD III Owner's manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Components
The Wrist strap rotates freely. As
a safety measure it is advisable to
hold the camera through the Wrist
strap.
Wrist strap Carrying the tripod
LIGHTY POD
Operating Instructions
Congratulations on the purchase of a SLIK LIGHTY POD .
SLIK Corporation has designed your Monopod to be a sturdy,
rugged, dependable product that will provide you with many years of
satisfactory use.
Please take a few moments to read this instruction sheet carefully so
that you can take full advantage of many fine features on your
Monopod.
Retain this instruction sheet in case you might want to refer back to it.
Caution
This caution icon refers to information pertaining to important safety
procedures in preventing injuries, and damages which may occur as
a result of mishandling this product.
Prohibited
This prohibited icon refers to information pertaining to prohibited
contents. Please refer to instructions closely to avoid accidents.
Specification
Max. operating height 1,600 mm
(63")
Length folded 520 mm
(20 1/2")
Weight 440 g
(1lbs)
R
Head
Wrist strap
Double
grooved leg
Speed release
leg locks
Rubber leg tip
Camera post
Tilt lock knob
Camera platform
Mounting camera to camera platform
Carrying a monopod with a
camera left on can result in
unexpected accidents.
We therefore, recommend that
you remove your camera when
carrying the monopod.
Prohibited
Unlock the Tilt lock knob.
Extending the leg
Flip up the Speed release leg
locks on the leg to be adjusted.
Extend the leg to the desired
length. Since the Speed release
leg locks are aligned, they can be
opened simultaneously for fast
set-up. To lock leg in place, press
down the Speed release leg locks
until they are flush against the
leg.
You'll be glad to know the round
tube design of your monopod's
leg are made for maximum
strength. This prevents twisting
and provides excellent torsional
rigidity.
Caution
OIL
THINNER
Printed in THAILAND
DO NOT apply any grease or oil to this product.
Clean with a mild detergent and a soft cloth only.
DO NOT use close to flame. Avoid extreme heat.
Slik Corporation reserves the right to make changes in design and/or improvements on the products without any obligation and advanced notice.
Care of the tripod
SLIK CORPORATION
853 Kayama, Hidaka City, Saitama 350-1231 Japan Phone 81-42-989-2141, Fax. 81-42-985-0210 ©2005
Align the Camera post with the
tripod socket. Turn the Camera
platform until it is securely
tightened.
/