Stairville DJ Lase RGB Pro Advanced 2000 User manual

Brand: Stairville

Model: DJ Lase RGB Pro Advanced 2000

Category: Stroboscopes & disco lights

Type: User manual

Stairville DJ Lase RGB Pro Advanced 2000

Stairville DJ Lase RGB Pro Advanced 2000 captivates with its high-precision, razor-sharp laser projections and a multitude of effects. Featuring a red, a green and a blue laser diode, the Lase RGB Pro Advanced 2000 offers a power of up to 200mW per laser. These powerful laser diodes enable you to create colourful laser effects in large venues and at long distances.

The operation of the Stairville DJ Lase RGB Pro Advanced 2000 is designed to be user-friendly and efficient. With the rotary encoder and the display, you can scroll through the menu conveniently and set the desired settings quickly. The Stairville DJ Lase RGB Pro Advanced 2000 supports various DMX modes and can also be controlled via the integrated microphone so that the laser effects can adapt to the music in real-time.

Stairville DJ Lase RGB Pro Advanced 2000

DJ Lase

Pro Advanced 2000

showlaser

user manual

Musikhaus Thomann

Thomann GmbH

Hans-Thomann-Straße 1

96138 Burgebrach

Germany

Telephone: +49 (0) 9546 9223-0

E-mail: [email protected]

Internet: www.thomann.de

11.09.2020, ID: 482998

Table of contents

1 General information................................................................................................................................. 5

1.1 Further information........................................................................................................................... 6

1.2 Notational conventions.................................................................................................................... 7

1.3 Symbols and signal words............................................................................................................... 8

2 Safety instructions.................................................................................................................................. 10

3 Features....................................................................................................................................................... 19

4 Installation.................................................................................................................................................. 20

5 Starting up.................................................................................................................................................. 27

6 Connections and operating elements........................................................................................... 30

7 Operating.................................................................................................................................................... 38

7.1 Switching the device on / o....................................................................................................... 38

7.2 Main menu.......................................................................................................................................... 39

7.3 SYSTEM menu.................................................................................................................................... 40

7.4 Operating modes............................................................................................................................. 42

7.5 Setting DMX channel...................................................................................................................... 49

Table of contents

DJ Lase Pro Advanced 2000

7.6 Functions in DMX mode................................................................................................................ 50

7.7 Operating via keyboard................................................................................................................. 58

7.8 Menu overview................................................................................................................................. 66

7.9 Reset to factory defaults................................................................................................................ 67

8 Technical specications....................................................................................................................... 68

9 Plug and connection assignment.................................................................................................... 71

10 Troubleshooting...................................................................................................................................... 75

11 Cleaning....................................................................................................................................................... 78

12 Protecting the environment.............................................................................................................. 79

Table of contents

showlaser

1 General information

This user manual contains important information on the safe operation of the device. Read and

follow all safety notes and all instructions. Save this manual for future reference. Make sure

that it is available to all persons using this device. If you sell the device to another user, be sure

that they also receive this manual.

Our products and user manuals are subject to a process of continuous development. We there‐

fore reserve the right to make changes without notice. Please refer to the latest version of the

user manual which is ready for download under www.thomann.de.

General information

DJ Lase Pro Advanced 2000

1.1 Further information

On our website (www.thomann.de) you will nd lots of further information and details on the

following points:

Download This manual is also available as PDF le for you to download.

Keyword search

Use the search function in the electronic version to nd the topics of

interest for you quickly.

Online guides

Our online guides provide detailed information on technical basics

and terms.

Personal consultation For personal consultation please contact our technical hotline.

Service

If you have any problems with the device the customer service will

gladly assist you.

General information

showlaser

1.2 Notational conventions

This manual uses the following notational conventions:

The letterings for connectors and controls are marked by square brackets and italics.

Examples: [VOLUME] control, [Mono] button.

Texts and values displayed on the device are marked by quotation marks and italics.

Examples: ‘24ch’ , ‘OFF’ .

References to other locations in this manual are identied by an arrow and the specied page

number. In the electronic version of the manual, you can click the cross-reference to jump to

the specied location.

Example: See

‘Cross-references’ on page 7.

Letterings

Displays

Cross-references

General information

DJ Lase Pro Advanced 2000

1.3 Symbols and signal words

In this section you will nd an overview of the meaning of symbols and signal words that are

used in this manual.

Signal word Meaning

DANGER! This combination of symbol and signal word indicates an

immediate dangerous situation that will result in death or

serious injury if it is not avoided.

WARNING! This combination of symbol and signal word indicates a pos‐

sible dangerous situation that can result in death or serious

injury if it is not avoided.

NOTICE! This combination of symbol and signal word indicates a pos‐

sible dangerous situation that can result in material and

environmental damage if it is not avoided.

General information

showlaser

Warning signs Type of danger

Warning – high-voltage.

Warning – laser radiation.

Warning – dangerous optical radiation.

Warning – suspended load.

Warning – danger zone.

General information

DJ Lase Pro Advanced 2000

2 Safety instructions

This device is intended to be used for the projection of laser light eects. It has been designed

exclusively for show applications. Use the device only as described in this user manual. Any

other use or use under other operating conditions is considered to be improper and may result

in personal injury or property damage. No liability will be assumed for damages resulting from

improper use.

This device may be used only by persons with sucient physical, sensorial, and intellectual

abilities and having corresponding knowledge and experience. Other persons may use this

device only if they are supervised or instructed by a person who is responsible for their safety.

Intended use

Safety instructions

showlaser

Laser safety requirements are based on DIN EN 60825-1:2015. The corresponding accident pre‐

vention regulation of the Accident Prevention and Insurance Association in Germany is BGV-

B2.

This device contains a class-4 laser. It comes equipped with a safety key and a jack for con‐

necting an external safety switch. Always remove the key when the device is not attended by a

trained operator.

As an operator you are responsible for the safety of all persons present. Familiarize yourself

with the laser safety regulations that apply in your country. To ensure safe operation, it is

important to pay attention to the following instructions.

Prior to commissioning, the company/operator must appoint a qualied person as laser pro‐

tection ocer in writing and notify the operation of the laser equipment to the Accident Pre‐

vention and Insurance Association and to the authority responsible for occupational safety. In

the event of public use, the complete laser equipment must be approved by an expert (e. g.

the Technical Control Board TÜV) prior to commissioning.

Laser safety basics

Safety instructions

DJ Lase Pro Advanced 2000

DANGER!

Danger for children

Ensure that plastic bags, packaging, etc. are disposed of properly and are not

within reach of babies and young children. Choking hazard!

Ensure that children do not detach any small parts (e.g. knobs or the like) from

the unit. They could swallow the pieces and choke!

Never let children unattended use electrical devices.

DANGER!

Electric shock caused by high voltages inside

Within the device there are areas where high voltages may be present. Never

remove any covers.

There are no user-serviceable parts inside.

Do not use the device if covers, protectors or optical components are missing or

damaged.

Safety

Safety instructions

showlaser

DANGER!

Electric shock caused by short-circuit

Always use proper ready-made insulated mains cabling (power cord) with a pro‐

tective contact plug. Do not modify the mains cable or the plug. Failure to do so

could result in electric shock/death or re. If in doubt, seek advice from a regis‐

tered electrician.

DANGER!

Laser radiation – avoid exposure to beam

The device contains a class-4 laser, classied according to EN 60825-1:2015. Do

not look into the laser beam. The laser beam can injure your eyes when you

directly look into it. Do not expose yourself to the laser beam. The laser beam can

cause skin burns.

In this context take extreme care when using converging optical instruments.

Safety instructions

DJ Lase Pro Advanced 2000

WARNING!

Eye damage caused by high light intensity

Never look directly into the light source.

WARNING!

Risk of epileptic shock

Strobe lighting can trigger seizures in photosensitive epilepsy. Sensitive persons

should avoid looking at strobe lights.

NOTICE!

Laser radiation – risk of re

Keep the area exposed to laser radiation free from ammable substances.

Safety instructions

showlaser

NOTICE!

Risk of re

Do not block areas of ventilation. Do not install the device near any direct heat

source. Keep the device away from naked ames.

Safety instructions

DJ Lase Pro Advanced 2000

NOTICE!

Operating conditions

This device has been designed for indoor use only. To prevent damage, never

expose the device to any liquid or moisture. Avoid direct sunlight, heavy dirt, and

strong vibrations.

Only operate the device within the ambient conditions specied in the chapter

‘Technical specications’ of this user manual. Avoid heavy temperature uctua‐

tions and do not switch the device on immediately after it was exposed to tem‐

perature uctuations (for example after transport at low outside temperatures).

Dust and dirt inside can damage the unit. When operated in harmful ambient

conditions (dust, smoke, nicotine, fog, etc.), the unit should be maintained by

qualied service personnel at regular intervals to prevent overheating and other

malfunction.

Safety instructions

showlaser

NOTICE!

Power supply

Before connecting the device, ensure that the input voltage (AC outlet) matches

the voltage rating of the device and that the AC outlet is protected by a residual

current circuit breaker. Failure to do so could result in damage to the device and

possibly injure the user.

Unplug the device before electrical storms occur and when it is unused for long

periods of time to reduce the risk of electric shock or re.

NOTICE!

Possible damage due to installation of a wrong fuse

The use of dierent types of fuses can cause serious damage to the unit. Fire

hazard!

Only fuses of the same type may be used.

Safety instructions

DJ Lase Pro Advanced 2000

NOTICE!

Possible staining

The plasticiser contained in the rubber feet of this product may possibly react

with the coating of your parquet, linoleum, laminate or PVC oor and after some

time cause permanent dark stains.

In case of doubt, do not put the rubber feet directly on the oor, but use felt-pad

oor protectors or a carpet.

Safety instructions

showlaser

3 Features

Professional RGB laser for use in all event areas:

n Colour mixing based on analogue diode modulation

n Laser power: 2000 mW

n Laser class: 4

n Control options:

– DMX-512 (20 channels)

– ILDA

– IR remote control (included)

– built-in buttons and display

– USB keyboard (included)

n Sound-control with preprogrammed patterns

n Auto operation with preprogrammed patterns

n Manual control with text input and countdown via USB keyboard

n Simultaneous menu items indication on the display and as laser projection

n Key switch secured

n Suitable for truss or ceiling mounting

Features

DJ Lase Pro Advanced 2000

4 Installation

Unpack and check carefully there is no transportation damage before using the unit. Keep the

equipment packaging. To fully protect the product against vibration, dust and moisture during

transportation or storage use the original packaging or your own packaging material suitable

for transport or storage, respectively.

You can install the device standing or hanging. When in use, the device must be mounted at a

solid surface or clamped to an approved truss.

Work from a stable platform whenever you install or move the device or when you perform

any kind of maintenance. Block access under the work area.

Installation

showlaser

Page is loading ...

Stairville DJ Lase RGB Pro Advanced 2000 User manual

Brand: Stairville

Model: DJ Lase RGB Pro Advanced 2000

Category: Stroboscopes & disco lights

Type: User manual

Stairville DJ Lase RGB Pro Advanced 2000

Download PDF

report

Stairville DJ Lase RGB Pro Advanced 2000 User manual

Stairville DJ Lase RGB Pro Advanced 2000 User manual

Related papers

Other documents