Ohlins FGKA1294 Mounting Instruction

Hello! I am an AI chatbot trained to assist you with the Ohlins FGKA1294 Mounting Instruction. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!

Öhlins Front Fork Kit for Kawasaki KX 450 F

FGKA 1294

Application Speciﬁc Mounting Instructions

Issued 2011-11-01

Kit Contents (application speciﬁc)

Recommended Tools (application speciﬁc)

Hydraulic Stop Cup

Set-Up Data

Spring Recommendation

Part No. Pcs.

Front Fork kit FGKA 1294 1

Base plug (with o-rings) 15430-03 2

Spacer 2 mm 15443-02 8

Hydraulic Stop Cup N/A N/A

Spring Support washer N/A N/A

OEM Fork Cap Tool, socket 49 mm, octagon

Socket for OEM Base Plug 17 mm

Socket for Öhlins Base Plug 20 mm

FGKA 1294 Cartridge kit uses STD/OEM Hydraulic stop cup.

Rebound Damping 15 clicks

Compression Damping 15 clicks

Spring Preload 1 mm

Fluid Volume (each leg) 0,375 litre

Cartridge Kit FGKA 1294 shall be used together with

Öhlins Front Fork Springs part no. 08765-xx. For rate

recommendations, see Owner’s Manual/ General Mounting

Instructions.

Note!

The fork springs need to be ordered separately depending on the

rider’s choice of spring rate.

Part No. Pcs.

Circlip 15440-01 2

Öhlins Sticker 00192-01 2

TTX Cartridge Sticker 00191-29 2

Owners Manual 07296-90 1

Spring preload range -2 to 8 mm

(can be adjusted by adding/removing washers 15443-02)

Fluid volume range (each leg) 0,300 - 0,450 litre

Öhlins Front Fork uid 01312-01