1 2 3 4
65
Programme selector
Sorting and loading the laundry
Observe the care information provided by the manufacturer.
Sort according to the information on the care labels.
Sort according to type, colour, soiling and temperature.
Remove any foreign objecbts - risk of rusting.
Do not exceed the maximum load. apage 7
Observe the instructions in the important information section. a page 9
Empty pockets and look out for metal items to avoid damaging the washing
machine.
Load both large and small items of laundry.
Close the washing machine door. Take care not to trap any items of clothing
between the loading door and rubber seal.
Add detergent and care product
Add the appropriate dose according to:
Amount of laundry, soiling, water hardness (ask your water supply
company) and manufacturer’s instructions.
Models without insert for liquid detergent: pour liquid detergent into an
appropriate dispenser and place in the drum.
During operation: close the detergent drawer!
2
Correct installation according to
separate installation instructions.
Check the machine
– Never switch on a damaged machine!
– Inform your customer service!
Insert mains plug
With dry hands only!
Only hold the plug itself!
Turn on the tap
Compartment II: Detergent for the main wash, water softener,
stain remover
Your washing machine
Congratulations – You have opted for a modern, high–quality
domestic appliance manufactured by SIEMENS. The washing
machine is distinguished by its economical use of water and energy.
Each appliance which leaves our factory has been inspected
thoroughly to ensure that it functions properly and is in perfect
condition.
Intended use
Contents Page
ʋ Intended use .......................................................................................1
ʋ Preparation .....................................................................................2/3
ʋ Setting and adjusting programmes ...........................................3/4
ʋ Removing laundry .............................................................................4
ʋ Set programmes, additional functions ......................................5/6
ʋ Programme overview .........................................................................7
ʋ Safety instructions .............................................................................8
ʋ Consumption values ........................................................................ 8
ʋ Important information .........................................................................9
ʋ Care .................................................................................................. 10
ʋ Information on the display ............................................................ 10
ʋ Maintenance .................................................................................... 11
ʋ What to do if ..............................................................................12/13
ʋ Emergency release ......................................................................... 13
ʋ Customer service............................................................................. 13
Protection of the environment/Conservation tips
– Always fill the washing machine with a maximum amount of
laundry for the relevant programme.
– Wash normally soiled laundry without Prewash.
– Select Intensive 60°C
to reach good cleaning result with
significantly lower energy consumption.
– Dose the detergent according to the manufacturer’s
instructions and water hardness.
– If the washing is then dried in the tumble dryer, select spin
speed according to the instructions of the dryer manufacturer.
Preparation
Before washing for the first time,
wash once with Easy care 40 ॕ without any launndry apage 9
Setting and adjusting programmes
Display panel/
Option buttons/
Additional functions
Start/
Reload
3
4
Washing
Compartment ~: Fabric softener
Compartment I: Detergent for prewash, pulp powder
ʋ For domestic use only.
ʋ For washing machine-washable fabrics in a detergent
solution.
ʋ To be operated with cold mains water and
commercially available low foam detergents and care
products which are suitable for use in washing
machines.
ʋ Operating conditions:
࣊ambient temperature 0-40°C.
–relative humidity of air: under 95% (tested at 25°C).
– Do not leave children and old people
unattended near the washing machine!
– The washing machine is not to be used by
children or persons not familiar with the
operating instructions.
– Keep pets away from the washing machine!
– Install and operate the washing machine in a
room with a drain.
– In order to ensure your safety, you must plug the
cable into a socket which is connected with
reliable earth correctly.
– Do not wash the carpet!
Dilute viscous fabric softener and fabric conditioner with water.
This prevents blockages.
ʑ
Additional
functions
Choose the additional functions before start .
a
Page 7
Quick wash For a shorter wash time with a comparable washing effect.
Rinse plus Additional rinse cycle, extended washing time. For areas with
very soft water or for further improvement of the rinsing result.
Less ironing Special spin sequence with subsequent fluffing. Gentle final
spin.
ʑ
Start / Reload
For starting or pausing the washing programme, be provided with the function of adding
the laundry in the process of washing.
ʑ
Signals
+
ʑ
Childproof lock s Programme will not be changed by accidental operation.
To activate the childproof lock:
– After the programme starts or finish in time is activated, press and hold the Start/
Reload button for 5 seconds;
– Release when the s symbol lights up. If button signal is on, an acoustic signal will be
heard.
s symbol flashes if the programme has been changed while childproof lock is
activated. The running programme continues working.
When the programme ends, is displayed, s symbol is still on, the Start/Reload
indicator flashes to remind you to deactivate the childproof lock.
To deactivate the childproof lock:
– Select the Start/Reload button until the s symbol turns off.
– Release the Start/Reload button button.
Set to for
5 seconds
Press and
hold
1 step
clockwise
Button signals
** Information signals**
Press
button and
Set volume
*
Press
button and Set
volume
*
1 step
clockwise
Set to
2. Set volume for ...
Release
*If required, set repeatedly.
** Button signals : Select additional functions, set programme or Start / Reload can be hinted.
Information signals : Programme finished or given an alarm.
direct
1. Start signal mode
Removing laundry
– Open washing machine door and remove laundry.
Turn off the tap
Switch off
– displaying, Set Programme selector to Off, if
not, the door lock will not be released safely and you can
not open the door.
7
Detergent drawer with
compartments I, II, ~
Control panel
Door handle
Drum
Set programmes, additional functions
Closing the door
Drain pump mulch
For additional functions and
option buttons apage 5, 6
Programmes
Detailed programme overview. a page 7
Quick 15’ / 30’ Extra short program
Cotton
Heavily soiled hard-wearing textiles
Prewash
Easy care Synthetics, easy-care textiles
Mix Textiles made of cotton and
synthetics
Intensive Heat-resistant textiles made of
cotton or linen
Antibacteria Program for allergic people and
advanced hygiene
Shirts Program for Shirts/Blouses
Underwear Delicate, washable underwear
Jeans Jeans and dark color textiles
Kidswear Textiles for Kids
dWool Hand and machine-washable wool
or wool-rich textiles
Delicate Silk and delicate washable textiles
Rinse Extra rinse with spin
Spin/Empty Additional spin cycle or to empty the
drum
1
5
Selecting Start / Reload
6
Programme ended when ...
Start/Reload indicator light goes out and or (if
was selected, no final drain / spin) is indicated on the
display panel, the buzzer sounds. Set volume of buzzer.
apage 6
If displays, Spin/Empty was selected, choose the
Start / Reload button, the programme will run with draining
the water and spinning the laundry.
Change the programme ...
If you have selected the wrong programme by mistake:
– Switch the programme selector and reselect the
programme.
– If necessary,set programmes and choose additional
functionsapage 5,6.
– Select Start/Reload and start the new programme.
Pause the programme ...
– Select the Start/Reload button.
– Follow the instructions in the display field: when r lights
up and appears in the display, the door can be
opened. If required, add/remove a laundry item; If is
displayed, it means the door can not be opened due to
a high water level in drum, a high temperature or spin
speed.
– Select Start/Reload button to continue the programme.
... or terminate the programme
Programmes with high temperature:
– Cool down laundry: Select Rinse.
– Select Start/Reload.
Programmes at lower temperature:
– Select Spin/Empty.
– Select Start/Reload.
Programme selector for switching the
machine on and off and for selecting the
programme. Can be rotated in either
direction.
ʑ
Display symbols
ʑ
Display information
Time, spin speed and
kilogramme will rolled
diaplay before start, only
to dispaly finish in time
when it starts. Display
information is depended
on different machine and
programme.
ʑ
Programme setting buttons
You can change the spin
speed and temperature
beforehand and while the
selected programme is
running.
tü(Washing): On if machine is washed.
If flashes:Too much detergent is useda
Page 12
mü(Rinse): On if machine is rinsed.
(Spin): On if machine is spun.
r (Door): On if door can be opened.
s(Childproof lock): On if childproof lock is activated.
Flashing aPage 6, Activate/deactivate
childproof lock.
Time, e.g. *: Programme remaining time.
*: Finish in time defined by user. a
Page 5
°C (Temperature) e.g. °C: Programme washing temperture.
(Spin speed) e.g. c: Programme spin speed.
kg e.g. kg*: Maximum load recommendation for selected
programme aPage 7, Programme overview
: Door can be opened when the programme is paused.
: Door can not be opened due to a high water level in drum, a high
temperature or spin speed.
: Finish of prmgramme.
: End of programme with the setting (without final drain/
spin)
: Set signal mode and volume. a Page 6
Information on the display. a Page 10
°C (Temperature): You can alter the display temperature, and the
highest temperature is depend on what programme you choose.
aPage 7, Programme overview
(Spin): You can change the indicated spin speed.( =the
washing remains in the final rinsing water, if you choose Spin/Empty,
on the display means it switches to empty programme.
(Finish in): When you select a programme, the respective programme
duration is displayed. You can delay the start of the programme before it
begins. The finish-in time indicates when the programme will be finished.
It can be set in hour increments up to a maximum of 24h. Press and hold
the (Finish in) button until the required number of hours is shown
(h=hour). Select Start / Reload, the door then be closed.You can not set
the Finish in after the programme is started.
Set programmes, additional functions
GB Standards:
(#(#(#
(#(#(#5
(#
Chief Distributor: BSH Home Appliances (China) Co., Ltd.
20, 21F CN International Mansion No. 129 Zhongshan Road
210005 Nanjing, Jiangsu Province, P.R.China
7
Programme overview (see also the information on page 5,6)
Programmes °C max. load
(kg)
Type of laundry
Compartment
*
Quick wash
Rinse plus
Less ironing
Rinse cycles
**
I II ~
Quick 15’/30’
cold- 40
2.0
Extra short program approx. 15 / 30 minutes, suitable for lightly soiled and small amounts
of laundry.
2
3.5
Prewash
cold- 90
7.5/5.6
**
Energy-intensive program for heavily soiled hard-wearing textiles made of cotton or linen.
3(4)
Cotton
Standard washing program for hard-wearing textiles made of cotton or linen.
3(4)
Intensive
cold- 60
Long time washing program for heavily soiled hard-wearing textiles made of cotton or
linen.
3(4)/2(3)**
Antibacteria
Program special designed for allergic people and advanced hygiene, suitable for
hard-wearing textiles made of cotton or linen.
3(4)
Mix cold- 40
4.0/3.5
**
Mixed load consisting of textiles made of cotton and synthetics.
2(3)
Easy care
cold- 60
Textiles made of synthetic materials or blended fabrics.
3(4)
Shirts 2.0 Suitable for Shirts/Blouses made of cotton, linen, synthetics fibres or blended fabrics.
2(3)
Underwear
cold- 40
1.0 For delicate, washable underwear e.g. made of velvet, lace, Lycra, silk or satin.
2(3)
Jeans
3.0
Program suitable for washing Jeans and other dark color textiles made of cotton or
synthetic textiles.
3(4)
Kidswear
cold- 60 Program suitable for washing kidswear made of cotton or synthetic textiles.
3(4)
d Wool
cold- 40 2.0
Hand and machine-washable wool or wool-rich textiles. Especially gentle wash program to
prevent shrinkage, longer program pauses (textiles rest in wash liquor)
e.g. cashmere, ohair or angora. Also suited for hand washable silk.
2
Delicate
For delicate, washable textiles, e.g.made of silk, satin, synthetic fibres or blended fabrics.
2(3)
Rinse
Extra rinse with spin.
1(2)
Spin / Empty
Select for additional spin cycle or to empty the drum. /
The programmes are time-controlled for lightly soiled textiles. If textiles are heavily soiled, reduce the load and select additional function.
Max. load according to GB 12021.4-2004.
* : obliged, : optional
** Values on left side of the / : for WM series, values on right side: for WS series. Rinse cycles: defalut rinse cycles (Max. Rinse cycles after selecting Rinse plus function.)
BSH Electrical Appliances (Jiangsu) Co., Ltd.
No.208 Yaoxin Road, Nanjing Economy and Technology Development
Zone 210046, Jiangsu Province, P.R.China
WS10O260TI WS10O268TI
WM10P260TI WM12P268TI
9000831080
1112
8
Safety instructions
– Read and follow the operating and installation instructions and all other information
enclosed with the washing machine.
– Retain documents for subsequent use.
Risk of electric shock
– Never pull out the mains plug by tugging the power cord.
– Never insert / pull out the mains plug with damp hands.
– Make sure the power cord is connected with reliable earth
correctly.
Risk of death
For worn-out appliances:
– Pull out the mains plug.
– Sever the power cord and discard together with the plug.
– Destroy the lock on the washing machine door.
This will prevent children from locking themselves and risking their
lives.
Risk of suffocation
– Keep packaging, plastic film and packaging parts out of the reach
of children.
Risk of poisoning
– Keep detergents and care products out of the reach of children.
Risk of explosion
– Items of laundry pretreated with cleaning agents containing
solvents, e.g. stain remover / cleaning solvents may lead to an
explosion after being loaded into the washing machine.
Rinse items of laundry thoroughly by hand beforehand.
Risk of injury
– Washing machine door may become very hot.
– Take care when draining hot detergent solution.
– Do not climb onto the washing machine.
– Do not lean on the open washing machine door.
– Do not touch the drum in case it is still spinning.
– Be careful when opening the detergent drawer while the machine
is in operation.
Consumption and nosie values
Model WS10O260TI WS10O268TI WM10P260TI WM12P268TI
ʑ
Grade* 1 1 1 1
Power consumption (Kwh/cycle) 0.94 0.94 1.27 1.27
Water consumption (L/cycle) 55 55 74 74
Washing efficiency 1.04 1.04 1.06 1.06
ʑ
Noise value**
Washing value 54dB(A) 54dB(A) 52dB(A) 52dB(A)
Spin value 69dB(A) 69dB(A) 66dB(A) 68dB(A)
* Energy consumption tested under standard programme Intensive 60 ॕ according to
GB12021.4-2004.
** Noise value tested according to GB19606-2004.
9
Important information
Washing preparing/Protecting the laundry and the machine
– Empty pockets.
– Look out for metal items (paperclips, etc.).
– Trousers, knitwear and knitted textiles, e.g. Jersey garments, T-shirts or sweatshirts should
be turned inside out.
– Ensure that the underwired bras are machine washable.
– Wash delicates in a net/bag (tights, curtains, underwired bras).
– Fasten zips, do up any buttons. Brush sand out of pockets and collars.
࣊ Remove curtain hooks or place curtains in a net/bag.
– Clean up the sand of the pocket and collar.
Before using for the first time
Do not put any laundry in the washing machine. Turn on the tap, pour ½ measuring cup of
detergent into dispenser II. Set the Easy care 40 °C programme and select Start/Reload.
At the end of the programme, set the programme selector to Off.
Laundry with different degrees of soiling
Wash new items separately.
Light Do not prewash.
If required, pretreat stains. Select Intensive programme.
Heavy Load less laundry. Prewash.
If required, pretreat stains. Select Prewash or Intensive
programme.
Soaking
Load laundry of the same colour
Pour soaking agent/detergent into dispenser II according to the manufcturer’s instructions.
Set Easy care 40 °C programme and select Start/Reload. After approx. 10 minutes, select
Start/Reload. After the required soaking time, reselect Start/Reload. If the programme is to
be continued or change the programme.
Starching Washing should not be treated with fabric softener.
Pour the starch which is suitable for 15 litre warter and make the water solution according to
manufacturer’s specifications. Select Rinse, after setting the spin speed press Start/Reload
button. Once water flows into the washing machine, pull out the detergent drawer gently, then
pour the solution into the compartment I, close the compartment.
Dyeing/bleaching
Do not dye and chlorine bleach laundry in the washing machine.
10
Care
Clean the machine housing, control panel
– Wipe with a soft, damp cloth.
– Do not use any abrasive cloths, scourers or cleaning agents (stainless steel cleaners).
– Immediately remove laundry and cleaning agent residues.
– Do not clean the appliance with a water jet.
Clean the detergent drawer
If it contains detergent or fabric softener residues.
1. Pull out the drawer up to the stop position, press down the latch on the
insert and remove the drawer completely .
2. Remove insert: pull insert upwards with finger.
3. Clean the detergent dispenser and the insert with water and a brush.
4. Refit the insert and secure in place (the cylinder should fit over the
guide pin).
5. Insert the detergent drawer.
Leave the detergent drawer open so that residual water can evaporate.
Clean the drum
Leave the washing machine door open after washing so that the drum can dry.
Rust stains – use chlorine–free cleaning agent, not steel wool.
Descaling No laundry in the machine!
This is not necessary if the detergent is dosed correctly. However, if it is necessary, follow the
instructions of the descaler manufacturer.
Information on the display
ü
No water supply;
Inlet filter blocked? Clean filter; apage 11
Supply hose kinked or blocked;
Low water supply.
Clean drain pump; apage 11
Outlet pipe / drainage hose blocked, clean it.
other displays
Switch off the appliance, wait 5 seconds and switch it back on;
If the display appears again, call the customer service. apage 13 or the
Warranty Card.
– Risk of electric shock!
-Pull out the mains plug!
-Risk of explosion! No solvents!
11
– Risk of scalding!
Allow detergent solution to cool down!
– Turn off the tap!
Maintenance
Drain pump blocked
Set programme selector to Off, pull out the mains plug.
1. Open service flap.
2. Take the drainage hose out of the holder.
3. Remove sealing cap, allow detergent solution to flow out. Have a suitable
container ready.
Push up the closing cap and place the drain hose back in its holder.
4. Carefully unscrew the pump cover (Caution residual water).
Clean the interior, pump cover thread and pump housing (fan impeller
in the detergent-solution pump must rotate).
5. Reinsert and screw on pump cover. Handle should be vertical. See the
right picture.
6. Close the service flap.
To prevent unused detergent from flowing into the outlet during the next
wash: Pour 1 litre of water into dispenser II and start the Spin/Empty
programme.
Filter blocked in water inlet hose
Release water pressure in the supply hose:
1. Turn off the tap!
2. Select any programme (except Spin/Empty).
3. Press Start/Reload button. Leave programme for approx. 40 seconds.
4. Set programme selector to Off. Pull out the mains plug.
C
lean the filter:
5. Disconnect the hose from the water tap.
Clean the filter with small brush.
or
Remove hose from the rear of the appliance.
Take out filter with pliers and clean.
6. Connect the hose and check for leaks.
12
What to do if …
ʑ
Water is running out. – Correctly attach / replace drainage hose.
– Tighten screw-fitting on the supply hose.
ʑ
Water not flowing in.
Detergent not washed in.
– Start / Reload not selected?
– Tap not open?
– Filter blocked? Cleaning the filter a Page 11
– Supply hose kinked or jammed?
ʑ
Washing-machine door
cannot be opened.
– Safety function active. Stop programme? a Page 4
– (without final spin) selected? a Page 5
– Can be opened via emergency release only? a Page 13
ʑ
Programme does not
start.
– Start / Reload selected?
– Finish-in selected?
– Wahing machine door not closed?
ʑ
Additional funtions can
not be chosen.
– The programme overviewa Page 7, know the functions applied
to the programme.
ʑ
Detergent solution is not
drained.
– Clean detergent-solution pump. a Page 11
– Clean outlet pipe and/or drainage hose.
ʑ
Water not visible in the
drum.
– Not a fault – water below the visible area.
ʑ
Spin result not
satisfactory.
– Not a fault – unbalanced load detection system has stopped
the spin cycle, washing unevenly distributed.
Distribute small and large items of washing in the drum.
– Less ironing selected? a Page 6
– Too low speed selected? a Page 5
ʑ
Spin cycle actuated
several times.
– Not a fault – unbalanced load detection system adjusts
imbalance.
ʑ
Residual water in the
dispenser for care
product 0.
– Remove the insert. Clean detergent drawer and insert. a Page
10
ʑ
Odour formation in the
washing machine.
– Run Easy care 40 °C programme without washing.
– Use standard detergent.
ʑ
tüflashes, foam comes
out of the detergent
drawer.
– Too much detergent used?
Mix 1 tablespoon of fabric softener with ½ litre of water and pour
into dispenser II.
(Not for outdoor, sports and down-filled textiles!)
– Reduce detergent dosage for the next wash cycle.
ʑ
Loud noise formation,
vibrations and wandering
during spin cycle.
– Appliance feet fixed?
Secure appliance feet. a Installation Instructions
– Transportation protection devices removed?
Remove transportation protection devices.
a Installation Instructions
ʑ
Display panel/indicator
lights do not function
while the appliance is
running.
– Power failure?
– Fuse tripped? Switch on/replace fuse.
– If the fault occurs repeatedly, call customer service.
ʑ
Childproof locks
flashes.
– After setting the childproof, the location of the programme
selector has changed.
– Childproof lock has not been deactived.a Page 6, deactive the
childproof lock.
ʑ
The programme takes
longer than usual.
– Not a fault – unbalanced load detection system adjusts
imbalance by repeatedly distributing the washing.
– Not a fault – foam detection system active – a rinse cycle is
switched on.
What to do if …
ʑ
Detergent residue on the
washing.
– Occasionally phosphate-free detergents contain water-insoluble
residue.
– Select Rinse or brush off residues when the laundry is dry.
ʑ
If a fault cannot be rectified (switching the machine on and off) or a repair is required:
– Set programme selector to Off and pull out the mains plug.
Turn off the tap and call customer service. a Installation instructions
Emergency release e.g. if power failure occurs
If power is cut when programme is running, the safety device will lock the door to avoid water
flow out of the machine. If the washing is still to be removed:
-The programme will continue to run when the power is restored. The laundry can be removed
when the programme ends.
-Release emergency release to open the door if the laundry need to be removed immediately!
Risk of scalding!
Wash liquor and washing may be hot. If required, leave to cool down.
Do not reach into the drum in case it is still rotating.
Do not open the door if you can still see water through the glass.
1. Set programme selector to Off, pull out the mains plug.
2. Drain detergent solution. a Page 11
3. Take the emergency release out of the holder.
Pull down emergency release with a tool and release.
Door can then be opened.
Customer service
ʑ
Before calling the after-sales service, please check whether you can eliminate the fault
yourself.
– Operating instructions, Page 12; What to do if ...
ʑ
If you require advice, even during the warranty period, you will incure costs for the call-out of
a technician.
ʑ
You can find your nearest customer service in the enclosed list. Please give customer service
the detailed information of your address, telephone number, error description, phurchase
date, product number (E-Nr.) and the production number (FD) of the appliance to prevent
unnecessary call-outs. This will save your additional costs.
Product number Production number
These specifications can be found in the
open door and on the rear of the appliance.
ʑ
Uniform customer service number in China: 400 889 9999
Consultation hotline: 800 828 9828
Fax: 025-84701672
en
! Any failure and losses
caused by ingoring the
above mentioned items
and cautions mentioned
in the operation and
installation instruction are
not covered by our
warranty and liability.
! Please keep all
documents in a safety
place for further
reference. If you have any
doubt, please contact our
local service center.
! Follow the safety
instructions on Page 8.
Operating instructions
XQG56-10O260
(WS10O260TI)
XQG56-10O268
(WS10O268TI)
XQG75-10P260
(WM10P260TI)
XQG75-12P268
(WM12P268TI)
Read these instructions
before switching on the
washer dryer. Also follow
the separate Installation
and maintenance
instructions.
1 2
Programme selector
a
a
Empty pockets and look out for metal items to avoid
Close the washing machine door. Take care not to tr
Correct installation according to
separate installation instructions.
Check the machine
– Never switch on a damaged machine!
– Inform your customer service!
Insert mains plug
With dry hands only!
Only hold the plug itself!
Turn on the tap
Compartment II: Detergent for the main wash, water softener,
stain remover
Your washing machine
Congratulations – You have opted for a modern, high–quality
domestic appliance manufactured by SIEMENS. The washing
machine is distinguished by its economical use of water and energy.
Each appliance which leaves our factory has been inspected
thoroughly to ensure that it functions properly and is in perfect
condition.
Intended use
Contents Page
ʋ Intended use .......................................................................................1
ʋ Preparation .....................................................................................2/3
ʋ Setting and adjusting programmes ...........................................3/4
ʋ Removing laundry .............................................................................4
ʋ Set programmes, additional functions ......................................5/6
ʋ Programme overview .........................................................................7
ʋ Safety instructions .............................................................................8
ʋ Consumption values ........................................................................8
ʋ Important information .........................................................................9
ʋ Care .................................................................................................. 10
ʋ Information on the display ............................................................ 10
ʋ Maintenance .................................................................................... 11
ʋ What to do if ..............................................................................12/13
ʋ Emergency release ......................................................................... 13
ʋ Customer service............................................................................. 13
Protection of the environment/Conservation tips
– Always fill the washing machine with a maximum amount of
laundry for the relevant programme.
– Wash normally soiled laundry without Prewash.
– Select Intensive 60°C to reach good cleaning result with
significantly lower energy consumption.
– Dose the detergent according to the manufacturer’s
instructions and water hardness.
– If the washing is then dried in the tumble dryer, select spin
speed according to the instructions of the dryer manufacturer.
Preparation
ॕ a
Display panel/
Option buttons/
Additional functions
Start/
Reload
Compartment ~: Fabric softener
Compartment I: Detergent for prewash, pulp powder
ʋ For domestic use only.
ʋ For washing machine-washable fabrics in a detergent
solution.
ʋ To be operated with cold mains water and
commercially available low foam detergents and care
products which are suitable for use in washing
machines.
ʋ Operating conditions:
࣊ambient temperature 0-40°C.
–relative humidity of air: under 95% (tested at 25°C).
– Do not leave children and old people
unattended near the washing machine!
– The washing machine is not to be used by
children or persons not familiar with the
operating instructions.
– Keep pets away from the washing machine!
– Install and operate the washing machine in a
room with a drain.
– In order to ensure your safety, you must plug the
cable into a socket which is connected with
reliable earth correctly.
– Do not wash the carpet!
ʑ
a
ʑ
ʑ
ʑ
s
s
s
s
s
~
a
Programmes
Detailed programme overview.
a page 7
Quick 15’ / 30’ Extra short program
Cotton
Heavily soiled hard-wearing textiles
Prewash
Easy care Synthetics, easy-care textiles
Mix Textiles made of cotton and
synthetics
Intensive Heat-resistant textiles made of
cotton or linen
Antibacteria Program for allergic people and
advanced hygiene
Shirts Program for Shirts/Blouses
Underwear Delicate, washable underwear
Jeans Jeans and dark color textiles
Kidswear Textiles for Kids
dWool Hand and machine-washable wool
or wool-rich textiles
Delicate Silk and delicate washable textiles
Rinse Extra rinse with spin
Spin/Empty Additional spin cycle or to empty the
drum
a
a
r
Programme selector for switching the
machine on and off and for selecting the
programme. Can be rotated in either
direction.
ʑ
ʑ
ʑ
tü
a
mü
r
s
a
a
c
a
a
a
a
GB Standards:
(#(#(#
(#(#(#5
(#
Chief Distributor: BSH Home Appliances (China) Co., Ltd.
20, 21F CN International Mansion No. 129 Zhongshan Road
210005 Nanjing, Jiangsu Province, P.R.China
~
d
2 3 4
Sorting and loading the laundry
Observe the care information provided by the manufacturer.
Sort according to the information on the care labels.
Sort according to type, colour, soiling and temperature.
Remove any foreign objecbts - risk of rusting.
Do not exceed the maximum load. apage 7
Observe the instructions in the important information section. a page 9
Empty pockets and look out for metal items to avoid damaging the washing
machine.
Load both large and small items of laundry.
Close the washing machine door. Take care not to trap any items of clothing
between the loading door and rubber seal.
Add detergent and care product
Add the appropriate dose according to:
Amount of laundry, soiling, water hardness (ask your water supply
company) and manufacturer’s instructions.
Models without insert for liquid detergent: pour liquid detergent into an
appropriate dispenser and place in the drum.
During operation: close the detergent drawer!
2
ʋ
ʋ
ʋ
ʋ
ʋ
ʋ
ʋ
ʋ
ʋ
ʋ
ʋ
ʋ
ʋ
ʋ
ʋ
Before washing for the first time,
wash once with Easy care 40 ॕ without any launndry apage 9
Setting and adjusting programmes
Start/
Reload
3
4
Washing
~
ʋ
ʋ
ʋ
ʋ
࣊
Dilute viscous fabric softener and fabric conditioner with water.
This prevents blockages.
ʑ
a
ʑ
ʑ
ʑ
s
s
s
s
s
Removing laundry
– Open washing machine door and remove laundry.
Turn off the tap
Switch off
– displaying, Set Programme selector to Off, if
not, the door lock will not be released safely and you can
not open the door.
7
Detergent drawer with
compartments I, II, ~
Control panel
Door handle
Drum
Closing the door
Drain pump mulch
For additional functions and
option buttons apage 5, 6
a
d
1
5
Selecting Start / Reload
6
Programme ended when ...
Start/Reload indicator light goes out and or (if
was selected, no final drain / spin) is indicated on the
display panel, the buzzer sounds. Set volume of buzzer.
apage 6
If displays, Spin/Empty was selected, choose the
Start / Reload button, the programme will run with draining
the water and spinning the laundry.
Change the programme ...
If you have selected the wrong programme by mistake:
– Switch the programme selector and reselect the
programme.
– If necessary,set programmes and choose additional
functionsapage 5,6.
– Select Start/Reload and start the new programme.
Pause the programme ...
– Select the Start/Reload button.
– Follow the instructions in the display field: when r lights
up and appears in the display, the door can be
opened. If required, add/remove a laundry item; If is
displayed, it means the door can not be opened due to
a high water level in drum, a high temperature or spin
speed.
– Select Start/Reload button to continue the programme.
... or terminate the programme
Programmes with high temperature:
– Cool down laundry: Select Rinse.
– Select Start/Reload.
Programmes at lower temperature:
– Select Spin/Empty.
– Select Start/Reload.
ʑ
ʑ
ʑ
tü
a
mü
r
s
a
a
c
a
a
a
a
(#(#(#
(#(#(#5
(#
~
d
65
a
a
2
ʋ
ʋ
ʋ
ʋ
ʋ
ʋ
ʋ
ʋ
ʋ
ʋ
ʋ
ʋ
ʋ
ʋ
ʋ
ॕ a
~
ʋ
ʋ
ʋ
ʋ
࣊
ʑ
Additional
functions
Choose the additional functions before start .
a
Page 7
Quick wash For a shorter wash time with a comparable washing effect.
Rinse plus Additional rinse cycle, extended washing time. For areas with
very soft water or for further improvement of the rinsing result.
Less ironing Special spin sequence with subsequent fluffing. Gentle final
spin.
ʑ
Start / Reload
For starting or pausing the washing programme, be provided with the function of adding
the laundry in the process of washing.
ʑ
Signals
+
ʑ
Childproof lock s Programme will not be changed by accidental operation.
To activate the childproof lock:
– After the programme starts or finish in time is activated, press and hold the Start/
Reload button for 5 seconds;
– Release when the s symbol lights up. If button signal is on, an acoustic signal will be
heard.
s symbol flashes if the programme has been changed while childproof lock is
activated. The running programme continues working.
When the programme ends, is displayed, s symbol is still on, the Start/Reload
indicator flashes to remind you to deactivate the childproof lock.
To deactivate the childproof lock:
– Select the Start/Reload button until the s symbol turns off.
– Release the Start/Reload button button.
Set to for
5 seconds
Press and
hold
1 step
clockwise
Button signals** Information signals**
Press
button and
Set volume*
Press
button and Set
volume*
1 step
clockwise
Set to
2. Set volume for ...
Release
*If required, set repeatedly.
** Button signals : Select additional functions, set programme or Start / Reload can be hinted.
Information signals : Programme finished or given an alarm.
direct
1. Start signal mode
, if
can
7
~
Set programmes, additional functions
a
a
d
indicator light goes out and or (if
n the
Set volume of buzzer.
a
button, the programme will run with draining
a
r lights
up and appears in the display, the door can be
is
to
in
/Reload button to continue the programme.
ʑ
Display symbols
ʑ
Display information
Time, spin speed and
kilogramme will rolled
diaplay before start, only
to dispaly finish in time
when it starts. Display
information is depended
on different machine and
programme.
ʑ
Programme setting buttons
You can change the spin
speed and temperature
beforehand and while the
selected programme is
running.
tü(Washing): On if machine is washed.
If flashes:Too much detergent is useda
Page 12
mü(Rinse): On if machine is rinsed.
(Spin): On if machine is spun.
r (Door): On if door can be opened.
s(Childproof lock): On if childproof lock is activated.
Flashing aPage 6, Activate/deactivate
childproof lock.
Time, e.g. *: Programme remaining time.
*: Finish in time defined by user. a
Page 5
°C (Temperature) e.g. °C: Programme washing temperture.
(Spin speed) e.g. c: Programme spin speed.
kg e.g. kg*: Maximum load recommendation for selected
programme aPage 7, Programme overview
: Door can be opened when the programme is paused.
: Door can not be opened due to a high water level in drum, a high
temperature or spin speed.
: Finish of prmgramme.
: End of programme with the setting (without final drain/
spin)
: Set signal mode and volume. a Page 6
Information on the display. a Page 10
°C (Temperature): You can alter the display temperature, and the
highest temperature is depend on what programme you choose.
aPage 7, Programme overview
(Spin): You can change the indicated spin speed.( =the
washing remains in the final rinsing water, if you choose Spin/Empty,
on the display means it switches to empty programme.
(Finish in): When you select a programme, the respective programme
duration is displayed. You can delay the start of the programme before it
begins. The finish-in time indicates when the programme will be finished.
It can be set in hour increments up to a maximum of 24h. Press and hold
the (Finish in) button until the required number of hours is shown
(h=hour). Select Start / Reload, the door then be closed.You can not set
the Finish in after the programme is started.
Set programmes, additional functions
(#(#(#
(#(#(#5
(#
~
d
a
a
2
ʋ
ʋ
ʋ
ʋ
ʋ
ʋ
ʋ
ʋ
ʋ
ʋ
ʋ
ʋ
ʋ
ʋ
ʋ
ॕ a
~
ʋ
ʋ
ʋ
ʋ
࣊
ʑ
a
ʑ
ʑ
ʑ
s
s
s
s
s
7
~
a
a
d
a
a
r
ʑ
ʑ
ʑ
tü
a
mü
r
s
a
a
c
a
a
a
a
(#(#(#
(#(#(#5
(#
7
Programme overview (see also the information on page 5,6)
Programmes °C max. load
(kg)
Type of laundry
Compartment
*
Quick wash
Rinse plus
Less ironing
Rinse cycles
**
I II ~
Quick 15’/30’
cold- 40
2.0
Extra short program approx. 15 / 30 minutes, suitable for lightly soiled and small amounts
of laundry.
2
3.5
Prewash
cold- 90
7.5/5.6**
Energy-intensive program for heavily soiled hard-wearing textiles made of cotton or linen.
3(4)
Cotton
Standard washing program for hard-wearing textiles made of cotton or linen.
3(4)
Intensive
cold- 60
Long time washing program for heavily soiled hard-wearing textiles made of cotton or
linen.
3(4)/2(3)**
Antibacteria
Program special designed for allergic people and advanced hygiene, suitable for
hard-wearing textiles made of cotton or linen.
3(4)
Mix cold- 40
4.0/3.5
**
Mixed load consisting of textiles made of cotton and synthetics.
2(3)
Easy care
cold- 60
Textiles made of synthetic materials or blended fabrics.
3(4)
Shirts 2.0 Suitable for Shirts/Blouses made of cotton, linen, synthetics fibres or blended fabrics.
2(3)
Underwear
cold- 40
1.0 For delicate, washable underwear e.g. made of velvet, lace, Lycra, silk or satin.
2(3)
Jeans
3.0
Program suitable for washing Jeans and other dark color textiles made of cotton or
synthetic textiles.
3(4)
Kidswear
cold- 60 Program suitable for washing kidswear made of cotton or synthetic textiles.
3(4)
d Wool
cold- 40 2.0
Hand and machine-washable wool or wool-rich textiles. Especially gentle wash program to
prevent shrinkage, longer program pauses (textiles rest in wash liquor)
e.g. cashmere, ohair or angora. Also suited for hand washable silk.
2
Delicate
For delicate, washable textiles, e.g.made of silk, satin, synthetic fibres or blended fabrics.
2(3)
Rinse
Extra rinse with spin.
1(2)
Spin / Empty
Select for additional spin cycle or to empty the drum. /
The programmes are time-controlled for lightly soiled textiles. If textiles are heavily soiled, reduce the load and select additional function.
Max. load according to GB 12021.4-2004.
* : obliged, : optional
** Values on left side of the / : for WM series, values on right side: for WS series. Rinse cycles: defalut rinse cycles (Max. Rinse cycles after selecting Rinse plus function.)
BSH Electrical Appliances (Jiangsu) Co., Ltd.
No.208 Yaoxin Road, Nanjing Economy and Technology Development
Zone 210046, Jiangsu Province, P.R.China
WS10O260TI WS10O268TI
WM10P260TI WM12P268TI
9000831080
1112
8
Safety instructions
– Read and follow the operating and installation instructions and all other information
enclosed with the washing machine.
– Retain documents for subsequent use.
Risk of electric shock
– Never pull out the mains plug by tugging the power cord.
– Never insert / pull out the mains plug with damp hands.
– Make sure the power cord is connected with reliable earth
correctly.
Risk of death
For worn-out appliances:
– Pull out the mains plug.
– Sever the power cord and discard together with the plug.
– Destroy the lock on the washing machine door.
This will prevent children from locking themselves and risking their
lives.
Risk of suffocation
– Keep packaging, plastic film and packaging parts out of the reach
of children.
Risk of poisoning
– Keep detergents and care products out of the reach of children.
Risk of explosion
– Items of laundry pretreated with cleaning agents containing
solvents, e.g. stain remover / cleaning solvents may lead to an
explosion after being loaded into the washing machine.
Rinse items of laundry thoroughly by hand beforehand.
Risk of injury
– Washing machine door may become very hot.
– Take care when draining hot detergent solution.
– Do not climb onto the washing machine.
– Do not lean on the open washing machine door.
– Do not touch the drum in case it is still spinning.
– Be careful when opening the detergent drawer while the machine
is in operation.
Consumption and nosie values
Model WS10O260TI WS10O268TI WM10P260TI WM12P268TI
ʑ
Grade* 1 1 1 1
Power consumption (Kwh/cycle) 0.94 0.94 1.27 1.27
Water consumption (L/cycle) 55 55 74 74
Washing efficiency 1.04 1.04 1.06 1.06
ʑ
Noise value**
Washing value 54dB(A) 54dB(A) 52dB(A) 52dB(A)
Spin value 69dB(A) 69dB(A) 66dB(A) 68dB(A)
* Energy consumption tested under standard programme Intensive 60 ॕ according to
GB12021.4-2004.
** Noise value tested according to GB19606-2004.
9
Important information
Washing preparing/Protecting the laundry and the machine
– Empty pockets.
– Look out for metal items (paperclips, etc.).
– Trousers, knitwear and knitted textiles, e.g. Jersey garments, T-shirts or sweatshirts should
be turned inside out.
– Ensure that the underwired bras are machine washable.
– Wash delicates in a net/bag (tights, curtains, underwired bras).
– Fasten zips, do up any buttons. Brush sand out of pockets and collars.
࣊ Remove curtain hooks or place curtains in a net/bag.
– Clean up the sand of the pocket and collar.
Before using for the first time
Do not put any laundry in the washing machine. Turn on the tap, pour ½ measuring cup of
detergent into dispenser II. Set the Easy care 40 °C programme and select Start/Reload.
At the end of the programme, set the programme selector to Off.
Laundry with different degrees of soiling
Wash new items separately.
Light Do not prewash.
If required, pretreat stains. Select Intensive programme.
Heavy Load less laundry. Prewash.
If required, pretreat stains. Select Prewash or Intensive
programme.
Soaking
Load laundry of the same colour
Pour soaking agent/detergent into dispenser II according to the manufcturer’s instructions.
Set Easy care 40 °C programme and select Start/Reload. After approx. 10 minutes, select
Start/Reload. After the required soaking time, reselect Start/Reload. If the programme is to
be continued or change the programme.
Starching Washing should not be treated with fabric softener.
Pour the starch which is suitable for 15 litre warter and make the water solution according to
manufacturer’s specifications. Select Rinse, after setting the spin speed press Start/Reload
button. Once water flows into the washing machine, pull out the detergent drawer gently, then
pour the solution into the compartment I, close the compartment.
Dyeing/bleaching
Do not dye and chlorine bleach laundry in the washing machine.
ü
a
a
a
ʑ
ʑ
a
ʑ
a
a
a
ʑ
ʑ
a
ʑ
a
ʑ
ʑ
a
a
ʑ
ʑ
0
a
ʑ
ʑ
tü
ʑ
a
a
ʑ
ʑ
s
a
ʑ
ʑ
ʑ
a
a
ʑ
ʑ
ʑ
ʑ
ʑ
ʑ
ॕ
࣊
10
Care
Clean the machine housing, control panel
– Wipe with a soft, damp cloth.
– Do not use any abrasive cloths, scourers or cleaning agents (stainless steel cleaners).
– Immediately remove laundry and cleaning agent residues.
– Do not clean the appliance with a water jet.
Clean the detergent drawer
If it contains detergent or fabric softener residues.
1. Pull out the drawer up to the stop position, press down the latch on the
insert and remove the drawer completely .
2. Remove insert: pull insert upwards with finger.
3. Clean the detergent dispenser and the insert with water and a brush.
4. Refit the insert and secure in place (the cylinder should fit over the
guide pin).
5. Insert the detergent drawer.
Leave the detergent drawer open so that residual water can evaporate.
Clean the drum
Leave the washing machine door open after washing so that the drum can dry.
Rust stains – use chlorine–free cleaning agent, not steel wool.
Descaling No laundry in the machine!
This is not necessary if the detergent is dosed correctly. However, if it is necessary, follow the
instructions of the descaler manufacturer.
Information on the display
ü
No water supply;
Inlet filter blocked? Clean filter; apage 11
Supply hose kinked or blocked;
Low water supply.
Clean drain pump; apage 11
Outlet pipe / drainage hose blocked, clean it.
other displays
Switch off the appliance, wait 5 seconds and switch it back on;
If the display appears again, call the customer service. apage 13 or the
Warranty Card.
– Risk of electric shock!
-Pull out the mains plug!
-Risk of explosion! No solvents!
11
– Risk of scalding!
Allow detergent solution to cool down!
– Turn off the tap!
Maintenance
Drain pump blocked
Set programme selector to Off, pull out the mains plug.
1. Open service flap.
2. Take the drainage hose out of the holder.
3. Remove sealing cap, allow detergent solution to flow out. Have a suitable
container ready.
Push up the closing cap and place the drain hose back in its holder.
4. Carefully unscrew the pump cover (Caution residual water).
Clean the interior, pump cover thread and pump housing (fan impeller
in the detergent-solution pump must rotate).
5. Reinsert and screw on pump cover. Handle should be vertical. See the
right picture.
6. Close the service flap.
To prevent unused detergent from flowing into the outlet during the next
wash: Pour 1 litre of water into dispenser II and start the Spin/Empty
programme.
Filter blocked in water inlet hose
Release water pressure in the supply hose:
1. Turn off the tap!
2. Select any programme (except Spin/Empty).
3. Press Start/Reload button. Leave programme for approx. 40 seconds.
4. Set programme selector to Off. Pull out the mains plug.
Clean the filter:
5. Disconnect the hose from the water tap.
Clean the filter with small brush.
or
Remove hose from the rear of the appliance.
Take out filter with pliers and clean.
6. Connect the hose and check for leaks.
ʑ
ʑ
a
ʑ
a
a
a
ʑ
ʑ
a
ʑ
a
ʑ
ʑ
a
a
ʑ
ʑ
0
a
ʑ
ʑ
tü
ʑ
a
a
ʑ
ʑ
s
a
ʑ
ʑ
ʑ
a
a
ʑ
ʑ
ʑ
ʑ
ʑ
ʑ
ॕ
࣊
ü
a
a
a
12
What to do if …
ʑ
Water is running out. – Correctly attach / replace drainage hose.
– Tighten screw-fitting on the supply hose.
ʑ
Water not flowing in.
Detergent not washed in.
– Start / Reload not selected?
– Tap not open?
– Filter blocked? Cleaning the filter a Page 11
– Supply hose kinked or jammed?
ʑ
Washing-machine door
cannot be opened.
– Safety function active. Stop programme? a Page 4
– (without final spin) selected? a Page 5
– Can be opened via emergency release only? a Page 13
ʑ
Programme does not
start.
– Start / Reload selected?
– Finish-in selected?
– Wahing machine door not closed?
ʑ
Additional funtions can
not be chosen.
– The programme overviewa Page 7, know the functions applied
to the programme.
ʑ
Detergent solution is not
drained.
– Clean detergent-solution pump. a Page 11
– Clean outlet pipe and/or drainage hose.
ʑ
Water not visible in the
drum.
– Not a fault – water below the visible area.
ʑ
Spin result not
satisfactory.
– Not a fault – unbalanced load detection system has stopped
the spin cycle, washing unevenly distributed.
Distribute small and large items of washing in the drum.
– Less ironing selected? a Page 6
– Too low speed selected? a Page 5
ʑ
Spin cycle actuated
several times.
– Not a fault – unbalanced load detection system adjusts
imbalance.
ʑ
Residual water in the
dispenser for care
product 0.
– Remove the insert. Clean detergent drawer and insert. a Page
10
ʑ
Odour formation in the
washing machine.
– Run Easy care 40 °C programme without washing.
– Use standard detergent.
ʑ
tüflashes, foam comes
out of the detergent
drawer.
– Too much detergent used?
Mix 1 tablespoon of fabric softener with ½ litre of water and pour
into dispenser II.
(Not for outdoor, sports and down-filled textiles!)
– Reduce detergent dosage for the next wash cycle.
ʑ
Loud noise formation,
vibrations and wandering
during spin cycle.
– Appliance feet fixed?
Secure appliance feet. a Installation Instructions
– Transportation protection devices removed?
Remove transportation protection devices.
a Installation Instructions
ʑ
Display panel/indicator
lights do not function
while the appliance is
running.
– Power failure?
– Fuse tripped? Switch on/replace fuse.
– If the fault occurs repeatedly, call customer service.
ʑ
Childproof locks
flashes.
– After setting the childproof, the location of the programme
selector has changed.
– Childproof lock has not been deactived.a Page 6, deactive the
childproof lock.
ʑ
The programme takes
longer than usual.
– Not a fault – unbalanced load detection system adjusts
imbalance by repeatedly distributing the washing.
– Not a fault – foam detection system active – a rinse cycle is
switched on.
What to do if …
ʑ
Detergent residue on the
washing.
– Occasionally phosphate-free detergents contain water-insoluble
residue.
– Select Rinse or brush off residues when the laundry is dry.
ʑ
If a fault cannot be rectified (switching the machine on and off) or a repair is required:
– Set programme selector to Off and pull out the mains plug.
Turn off the tap and call customer service. a Installation instructions
Emergency release e.g. if power failure occurs
If power is cut when programme is running, the safety device will lock the door to avoid water
flow out of the machine. If the washing is still to be removed:
-The programme will continue to run when the power is restored. The laundry can be removed
when the programme ends.
-Release emergency release to open the door if the laundry need to be removed immediately!
Risk of scalding!
Wash liquor and washing may be hot. If required, leave to cool down.
Do not reach into the drum in case it is still rotating.
Do not open the door if you can still see water through the glass.
1. Set programme selector to Off, pull out the mains plug.
2. Drain detergent solution. a Page 11
3. Take the emergency release out of the holder.
Pull down emergency release with a tool and release.
Door can then be opened.
Customer service
ʑ
Before calling the after-sales service, please check whether you can eliminate the fault
yourself.
– Operating instructions, Page 12; What to do if ...
ʑ
If you require advice, even during the warranty period, you will incure costs for the call-out of
a technician.
ʑ
You can find your nearest customer service in the enclosed list. Please give customer service
the detailed information of your address, telephone number, error description, phurchase
date, product number (E-Nr.) and the production number (FD) of the appliance to prevent
unnecessary call-outs. This will save your additional costs.
Product number Production number
These specifications can be found in the
open door and on the rear of the appliance.
ʑ
Uniform customer service number in China: 400 889 9999
Consultation hotline: 800 828 9828
Fax: 025-84701672
ʑ
ʑ
ॕ
࣊
ü
a
a
a
ʑ
ʑ
a
ʑ
a
a
a
ʑ
ʑ
a
ʑ
a
ʑ
ʑ
a
a
ʑ
ʑ
0
a
ʑ
ʑ
tü
ʑ
a
a
ʑ
ʑ
s
a
ʑ
ʑ
ʑ
a
a
ʑ
ʑ
ʑ
ʑ
en
! Any failure and losses
caused by ingoring the
above mentioned items
and cautions mentioned
in the operation and
installation instruction are
not covered by our
warranty and liability.
! Please keep all
documents in a safety
place for further
reference. If you have any
doubt, please contact our
local service center.
! Follow the safety
instructions on Page 8.
Operating instructions
XQG56-10O260
(WS10O260TI)
XQG56-10O268
(WS10O268TI)
XQG75-10P260
(WM10P260TI)
XQG75-12P268
(WM12P268TI)
Read these instructions
before switching on the
washer dryer. Also follow
the separate Installation
and maintenance
instructions.
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
Siemens SIEMENS WM User manual
- Type
- User manual
- This manual is also suitable for
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Siemens WM12P420IN/04 User manual
-
Siemens Washing machine SIWAMAT User manual
-
-
-
-
Siemens WM14Q360GB/14 User manual
-
-
-
Siemens WI14S440EU User manual
-
Other documents
-
Bosch WAP202C00W/02 User manual
-
Bosch WAG16260IN/01 Operat./Install.Instruct./Program table
-
-
-
-
Gorenje PS10/41141 User manual
-
Euromaid WMD107 User manual
-
-
-