AGFA AGFA 5075 DIGITAL PHOTOFRAME User manual

Use enclosed DC 9V/ . A power adapter,the unit is for indoor use only.18

Make sure theKeep the screen clean(please use a dry soft cloth for cleaning).

power is off before cleaning the unit. Then gently wipe with a dry soft cloth.

Do not place the unit near any other heat sources.

Do not splash or fill the unit with liquids.

Temperature and humidity:

Operating temperature:0 C- + 45 C,

Humidity:20%-80%

This equipment complies with the voltage type specified on the unit.

1

ENGLISH

Welcome

.

!

.

Thank you for purchasing our photo frame Get ready to experience photography

like never before

The photo frame allows you to view photos

Safety instructions and recommendations

In order to prevent damage to the card or the unit please turn off the power

before removing or inserting the card

,

.

The CE marking certifies that the product meets the main requirements of

the European Parliament and Council directive 1999 5 CE on telecommunications//

terminal equipment regarding safety and health of users and regarding,,

electromagnetic interference.

The declaration of compliance can be consulted on the site www ag aphoto com

or can be requested at the foll wing address

..

:

f

o

Environment

PACKAGING

()The presence of the logo green dot means that a contribution is paid to

an approved national organisation to improve package recovery and recycling

.infrastructures to facilitate please respect the sorting rules set up locally

.for this kind of waste

BATTERIES

If your product contains batteries they must be disposed of at appropriate

collection point

,

.

THE PRODUCT

-The crossed out waste bin stuck on the product means that the product

.belongs to the family of electrical and electronic equipment

,;In this respect the European regulations ask you to dispose of it selectively

- .At sales points in the event of the purchase of similar equipment

-(-,At the collection points made available to you locally drop off centre

, .).selective collection etc

In this way you can participate in the re use and upgrading of Electrical and-

Electronic Equipment Waste which can have an effect on the environment and,

human health.

2

Always handle the unit with care Avoid touching the LCD screen..

Never place heavy or sharp objects on the LCD panel frame or power cord,, .

Do not place the unit to rain water moisture or high humidity,, .

Preservation of the evironment as part of a sustainable development logic is an

essential concern of The desire of is to operate systems.AgfaPhoto AgfaPhoto

observing the environment and consequently it has decided to integrate environmental

performances in the life cycle of this products from manufacturing to commissioning,

use and elimination.

AgfaPhoto Holding Gmbh AGFAPHOTO is used under license of Agfa Gevaert:-

NV Co KG Agfa Gevaert NV Co KG does not manufacture these products&.. - &.

or provide any product warranty or support Contact www agfaphoto com For.:. .-

service support and warranty information contact the distributor or manufacturer,, :

sold and distributed by Sagem Communication www sagem com-. .

Your photo frame and its accessories

.

:

()

Place your set in front of you Take out the various components for your photo

frame and check that the components shown below are present

A power supply A photo frame and bracket

A remote control Intechangeable frames

With battery

A user guide

Features

3

4

7 high definition TFT LCD screen

Compatible with most digital cameras stored JPEG images

Automatic slideshow with adjustable display time

Supports SD MMC MS XD memory cards and USB Memory

Supports photo rotate and strech function

Includes infrared remote control

″

.

/// .

.

1 To rotate the photo

2

X

.: .

..

.

./ //

.

Skips to the previous photo

3 To start or to pause the playback

4 Skips to the next photo

5 To change the photo display size

6 To change the photo show delay time

7 Power Button

8 SD MMC MS D slot

9 USB Port

10 DC 9V Jack

/

Schematic Diagram

Remote Control

6

7

8

9

10

:,/.Standby button to turn on off backlight

43

16 9

:: : .

To switch to 4 3 LCD screen display

To switch to 16 9 LCD screen display

:.To start the playback

:.Skips to the previous photo

5s 10s 30s 60s///: . :To change photo show delay time Four items are available

,,, .5 10 30 60 seconds

Strech:.Switch to stretch LCD screen display

Rotate:.To rotate the photo for different angle viewing

:.

To pause the playback

Skips to the next photo

6

7

8

9

10

6

5

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

Installing the Battery in the Remote Control

Remove the battery cover on the rear of the remot control and insert the battery.Make suree

the polarities (+ and -) are aligned correctly.

Note !

Normally the batteries can last for around one year,if remote control does not work,please

replace the batteries.

If the player is not used for a long time,take out the batteries to prevent leakage and possible

damage to the remote control.

Do not mix new and old batteries.Nerer mix different types of batteries.

How to use the remote control

Point the remote control to the remote sensor on the player front panel. Its working limits

is within an angle of 3 0 and a distance of 2m. When using the remote control,no obstacle

is to be set between the remote control and remote sensor.

How to u e the Remote Controls

Basic Operation

Getting Started

Assemble the Photo Frame bracket on the back to prop the up, insertplayer

adapter

DC plug into the first, then plug adapter into a standard outlet.unit

,

..

Once you have photos on the memory card or USB device insert the card or USB device into

the proper slot

Do not force the card into the slot

,

:

Switch the Power switch on the rear panel of the player to be ON the screen will display

as below

8

7

And then the player will start photo slideshow .

Note:!

.

,.

The player will select one memory card to play at a time even though more

might be installed If you insert a memory card and USB device at the same

time the player will play the file on the memory card firstly

CAUTION RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT

TYPE DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS. .

Specifications

10

9

:.

To rotate the photo in different angles for viewing

To skip to the previous photo

To start or pause the playback

To skip to the next photo

To change the photo display size

To change the photo show delay time

Six it ms are available You can set the photo slideshow effect according to

your preference Press the button on the remote control or on the rear pane

of the player the corresponding icon on the menu will be highlighted Press

the button repeatly you can enjoy different slideshow

.

,.

e

l

During slideshow process Press any key on the rear panel of the playe or on the

remote control exclude the key the player will display as below

,

(), :

Basic Operation

Indicates

PROBLEMS

SOLUTIONS

Model No.

: A 5075F

Product

: 7" TFT LCD screen

:/ //Input formats SD MMC MS XD

File format

:

JPEG

USB Port : 20.

:/.Power DC 9V 1 8A

Dimension :. ..216 5 X 26 5 mm149 5 X.

Weight :.0 439kg

.All data are provided for reference purposes only reserves the rightAgfaPhoto

.to make any changes without prior notice

After Power on the photo

slideshow does not start

,

.

Check that you have inserted memory card or USB

device.

Check that the memory card or USB device is inserted

correc ly.t

Check that the memory card or USB device is

supported by the player

Check that the photo format is supported by the player

.

Photo Frame does not power

on.

Check that you connect the AC ad pter to the

frame properly.

a

Approva

l

:&CE ROHS

Page is loading ...

AGFA AGFA 5075 DIGITAL PHOTOFRAME User manual

This manual is also suitable for

AGFA AGFA 5075 DIGITAL PHOTOFRAME User manual

in other languages

Related papers

Other documents