Streamlabs UFMT-1000 User manual

Brand
Streamlabs
Model
UFMT-1000
Type
User manual

Streamlabs UFMT-1000 is an easy-to-install smart home water monitor that helps you protect your home from water damage. With its simple setup and no pipe cutting required, you can have it up and running in just three quick steps. The Streamlabs UFMT-1000 monitors your water usage and sends you alerts if it detects a leak, so you can take action before it causes any damage. It also works with other smart home devices like Amazon Alexa and Nest, so you can automatically put your Monitor in home or away mode.

Streamlabs UFMT-1000 is an easy-to-install smart home water monitor that helps you protect your home from water damage. With its simple setup and no pipe cutting required, you can have it up and running in just three quick steps. The Streamlabs UFMT-1000 monitors your water usage and sends you alerts if it detects a leak, so you can take action before it causes any damage. It also works with other smart home devices like Amazon Alexa and Nest, so you can automatically put your Monitor in home or away mode.

The easy smart home water monitor
Introducing the Streamlabs water monitor The easy smart home water monitor
Simple setup: Install with just 3 quick steps.
No pipe cutting required.
Calibration Status
Solid green LED light
represents Monitor in
calibratedstate
Wi-Fi Status
Blinking blue LED light
every 4seconds represents
connectivity
Reset Button
Press should you need to
reset the Wi-Fi
Power Source
Plug-in for the powersupply
Box contains:
• Streamlabs Monitor
• Power supply
• 4 pipe fasteners (2 spare)
• 1 extra contact pad set
1
Download.
Connect.
Sync.
3
Adjust
& set
alerts.
2
Install
easy-to-attach
Monitor.
1.3
gpm
Introducing the Streamlabs water monitor The easy smart home water monitor
Simple setup: Install with just 3 quick steps.
No pipe cutting required.
Calibration Status
Solid green LED light
represents Monitor in
calibratedstate
Wi-Fi Status
Blinking blue LED light
every 4seconds represents
connectivity
Reset Button
Press should you need to
reset the Wi-Fi
Power Source
Plug-in for the powersupply
Box contains:
• Streamlabs Monitor
• Power supply
• 4 pipe fasteners (2 spare)
• 1 extra contact pad set
1
Download.
Connect.
Sync.
3
Adjust
& set
alerts.
2
Install
easy-to-attach
Monitor.
1.3
gpm
1. Go to your device’s app store.
2. Search “Streamlabs water”.
3. Click on the Streamlabs app.
4. Click download.
How to download the Streamlabs app How to install the Streamlabs monitor
1
4
3
6
2
5
works with
Make your water even smarter
Streamlabs works with other smart home devices like Amazon Alexa and Nest to automatically
put your Monitor in home or away mode.
Visit www.streamlabswater.com/alexa or www.streamlabswater.com/nest to learn more.
1. Go to your device’s app store.
2. Search “Streamlabs water”.
3. Click on the Streamlabs app.
4. Click download.
How to download the Streamlabs app How to install the Streamlabs monitor
1
4
3
6
2
5
works with
Make your water even smarter
Streamlabs works with other smart home devices like Amazon Alexa and Nest to automatically
put your Monitor in home or away mode.
Visit www.streamlabswater.com/alexa or www.streamlabswater.com/nest to learn more.
In the Box
• Streamlabs Monitor • 4 pipe fasteners (2 spare)
• Power supply • 1 extra contact pad set
Requirements
• Wi-Fi 802.11b/g/n, 2.4GHz (WEP, WPA, WPA2 encryption supported)
Working broadband Internet connections with at least 2 Mbps upload speed
• Access to Power Outlet
• At least 6" of clean, straight pipe
• Access to inlet water supply
• Requires the free Streamlabs app and a compatible phone or tablet
with iOS 9.0 or later and Android 6.0 or later
• Use requires creation of a Streamlabs account and acceptance of terms
of service, which can be found online at www.streamlabswater.com
• Indoor use only
Pipe Compatibility
• ¾" & 1" CTS
• Copper (type M & L), CPVC & PEX
Specications
• Monitor dimensions: 5" (L) x 3.6" (W) x 2.4" (H)
• Monitor weight: <1 lb.
• Cable Length: 10'
Support and Limited Warranty
• Comes with a 2-year limited warranty.
For support, visit www.streamlabswater.com
In the Box
• Streamlabs Monitor • 4 pipe fasteners (2 spare)
• Power supply • 1 extra contact pad set
Requirements
• Wi-Fi 802.11b/g/n, 2.4GHz (WEP, WPA, WPA2 encryption supported)
Working broadband Internet connections with at least 2 Mbps upload speed
• Access to Power Outlet
• At least 6" of clean, straight pipe
• Access to inlet water supply
• Requires the free Streamlabs app and a compatible phone or tablet
with iOS 9.0 or later and Android 6.0 or later
• Use requires creation of a Streamlabs account and acceptance of terms
of service, which can be found online at www.streamlabswater.com
• Indoor use only
Pipe Compatibility
• ¾" & 1" CTS
• Copper (type M & L), CPVC & PEX
Specications
• Monitor dimensions: 5" (L) x 3.6" (W) x 2.4" (H)
• Monitor weight: <1 lb.
• Cable Length: 10'
Support and Limited Warranty
• Comes with a 2-year limited warranty.
For support, visit www.streamlabswater.com
Contact Us
Website: www.streamlabswater.com
Customer Support: www.support.streamlabswater.com
Email: support@streamlabswater.com
Phone: (770) 691-5524
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8

Streamlabs UFMT-1000 User manual

Brand
Streamlabs
Model
UFMT-1000
Type
User manual

Streamlabs UFMT-1000 is an easy-to-install smart home water monitor that helps you protect your home from water damage. With its simple setup and no pipe cutting required, you can have it up and running in just three quick steps. The Streamlabs UFMT-1000 monitors your water usage and sends you alerts if it detects a leak, so you can take action before it causes any damage. It also works with other smart home devices like Amazon Alexa and Nest, so you can automatically put your Monitor in home or away mode.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents