Thank you for purchasing our pebble tiles. Proper maintenance
procedures play an important role in the upkeep of all floors. A well-
maintained floor contributes to the lasting beauty of your project.
• As with any natural stone products, pebble tiles vary in
composition, color, texture and finish.
• To protect your installation, it is recommended to seal the grout
using a grout sealer.
• Natural pebbles should be sealed with 2 to 3 applications of stone
sealant after installation and depending on traffic and usage,
should be reapplied periodically.
After sealing, pebble tile surfaces are very easy to maintain.
• For general care, pebble tile floors should be swept with a soft
bristle broom.
• For any spills or dirt, gently wipe immediately with a damp cloth.
• To clean surfaces use warm water and a mild liquid soap. Never
use acid cleansers or abrasive chemicals on stone. It is
recommended to test a small area with the cleaner being used
prior to using. Always follow recommendations and instructions
from the cleaning product manufacturer.
For questions please contact MJSI @: (855) 496-2999, Fax: (904) 309-5739
