MYPIN 713382813037 User manual

Brand
MYPIN
Model
713382813037
Category
Console extenders
Type
User manual

MYPIN 713382813037 HDMI Extender Over Network Cable

The MYPIN 713382813037 HDMI Extender Over Network Cable allows you to extend your HDMI signal up to 60 meters over a single Cat6, Cat6A, or Cat7 cable. This makes it ideal for use in a variety of applications, such as:

  • Home theater: Extend your HDMI signal from your Blu-ray player or game console to your TV in another room.
  • Office: Extend your HDMI signal from your computer to a projector or monitor in a conference room.
  • School: Extend your HDMI signal from your computer to a projector or display in a classroom.

MYPIN 713382813037 HDMI Extender Over Network Cable

The MYPIN 713382813037 HDMI Extender Over Network Cable allows you to extend your HDMI signal up to 60 meters over a single Cat6, Cat6A, or Cat7 cable. This makes it ideal for use in a variety of applications, such as:

  • Home theater: Extend your HDMI signal from your Blu-ray player or game console to your TV in another room.
  • Office: Extend your HDMI signal from your computer to a projector or monitor in a conference room.
  • School: Extend your HDMI signal from your computer to a projector or display in a classroom.
HDMI Extender Over Network Cable
User’s manual
IMPORTANT SAFETY INSTRUCTIONS
：
1. Do not mix up HDI to RJ45 sender and RJ45 to HDMI receiver before installation .
2. DO not hot plug when it is working.
3. Use DC5V power supply only.Make sure specification matched if using adapters not supplied by factory.
PACKAGE CONTENTS
1.HDMI to RJ45 sender TX*1pcs 2.RJ45 to HDMI receiver RX*1pcs
3.DC5V/1A *2pcs 4. User manual*1pcs
5. IR blaster extension cable *1pcs 6. IR receiver extension cable*1pcs
Installation Requirements
1. HDMI source device(computer graphics card, DVD,PS3, HD monitoring equipment etc).
2. HDMI display device like SDTV, HDTV, projector with HDMI port.
3. UTP/STP cat6/6A/7 cable, follow standard IEEE-568B.
Panel Description
1. HDMI to RJ45 transmitter
1 DC5V power input 2 HDMI signal input
3 IR signal output to connect ith blaster extension cable 4 Reset
5 RJ45 signal output
6 HDMI signal indicator led it lights on all the time with HDMI signal input, flashes with no signal input.
2.RJ45 to HDMI receiver
1 reset 2 RJ45 signal input
3 RJ45 indicator led it lights on all the time with HDMI signal transmission, flashes with no signal transmission.
4 DV5V power input 5 HDMI signal output
6 IR signal input to connect with IR receiver extension cable
Installation Procedures
1. Cat6 network cable
FOLLOW THE STANARD OF IEEE-568B:
1- ORANGE/WHITE 2-ORANGE
3- GREEN/WHITE 4- BLUE
5- BLUE/WHITE 6-GREEN
7-BROWN/WHITE 8-BROWN
2. Connections
Connection instruction:
1) Connect TX HDMI input with source device HDMI output.Connect TX HDMI output with HDTV HDMI input.
2) Connect TX CAT6 with RX CAT6.
3) Connect RX HDMI output with HDTV HDMI input.
4) Power on the device and it works.
五、FAQ
Q: No image output or audio and video display is not normal?
A: 1)Adjust RX “RESET” button to reset the device.
2)Try shorter network cable to reconnect.
Q: RX “LINK” led is flashing all the time?
A: 1)Make sure network cable connection follows the standard of IEEE- 568B.
2)Check whether TX has HDMI signal input.
3)Reset TX&RX and reconnect.
Q: RX “LINK” led lights on all the time but no image output?
A: 1)Press RX “RESET” button to reset the device.
2)Make sure HDMI cable is well connected with TV.
3)Make sure the network cable is fine copper wires.
六、Specification
Items Specifications Note
HDMI signal Compatible HDCP
Resolution
supported
480i@60Hz, 480p@60Hz, 576i@50Hz,
576p@50Hz, 720p@50/60Hz, 1080i@50/60Hz,
1080p@50/60Hz
Network cable Low resistance and consumption oxygen-free
copper core
（
CAT6
、
CAT6A
、
CAT7
）
Transmission
length
CAT6:60m at 1080P
IR remote
control
Support 20~60KHz wide frequency IR remote control
Disclaimer
The product name and brand name may be registered trademark of related manufacturers.TM and ® may
be omitted on the user manual. The pictures on the user manual are just for reference,and there may be
some slight difference with the real products.
We reserve the rights to make changes without further notice to a product or system described here in to
improve reliability,function or design.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

MYPIN 713382813037 User manual

Brand
MYPIN
Model
713382813037
Category
Console extenders
Type
User manual

MYPIN 713382813037 HDMI Extender Over Network Cable

The MYPIN 713382813037 HDMI Extender Over Network Cable allows you to extend your HDMI signal up to 60 meters over a single Cat6, Cat6A, or Cat7 cable. This makes it ideal for use in a variety of applications, such as:

  • Home theater: Extend your HDMI signal from your Blu-ray player or game console to your TV in another room.
  • Office: Extend your HDMI signal from your computer to a projector or monitor in a conference room.
  • School: Extend your HDMI signal from your computer to a projector or display in a classroom.
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Other documents