7
Power /
Pause /
Play
Long press
Short press
On/off (They will all sound a "prompt".)
Allows playing or pausing; quickly
pressing it repeatedly allows
continuous music playback.
Port
8
AUX external audio jack
9
DC IN 5V jack
This is the headphone jack used
to connect to
portable audio devices etc.
using the AUX audio cable.
DC IN 5V jack
Switching
Mode
6
Long press
Aux Mode
Short press
Allows unpairing and return
to pairing mode
.
Connect the AUX audio cable to
automatically enter AUX mode.
Switching to AUX mode requires the
AUX audio cable to be connection.
Allows switching in the order of
" " → " "
Note
When not connected to any Bluetooth device,
the " "
indicator will continue " flashing" .
Note
If not connected to any Bluetooth device,
the " "
indicator will continue " flashing" .
How to make a wireless connection
with bluetooth devices
Pairing Instructions May Differ Depending On The Device
You Are Using Please refer to your device’s user manual for
further information.
Turn on the " " power button of this device.
ON/Standby: The
"
" indicator will flash in blue.
1
3
4
5
2
Pairing and connecting
After this device is turned ON, it will automatically connect to the
previously paired Bluetooth device before it was turned OFF.
1
Hold the " " function mode button of this device for 3 seconds to
unpair and return to the "Search Bluetooth pairing mode" .
3
2
Return to this condition to execute "pairing mode" again.
Reconnect pairing and connecting
Please first select the Bluetooth setting of the Bluetooth device, and
then start searching/scanning for the Bluetooth signal from the device.
When the list of detected devices is displayed on the screen of the
device, please select
"HB22" for pairing.
Note
1. When pairing this device with the Bluetooth device, please ensure
that your Bluetooth device is within one meter of this device.
Note
When pairing this device with the Bluetooth device, please ensure that
your Bluetooth device is within one meter of this device.
Please first select the Bluetooth setting of the Bluetooth device, and
then start searching/scanning for the Bluetooth signal from the device.
Once connected and paired successfully, the " " signal will remain
constantly ON.
2. If this device is not connected to any Bluetooth device, this device will
automatically enter pairing mode.
Read carefully and
keep this manual
Caution any changes or modifications not expressly approved could
void the user's authority to operate the equipment.
1
Any question or help for this equipment, please contact the supplier
or service center, do not operate it yourself.
2
Charging this device
Use the Micro USB charging cable and connect the Micro USB connector
to the Micro USB input port (DC 5V) of this device and connect the USB
connector on the other end to an appropriate charging device.
(such as: a computer than is ON/AC power outlet)
1
While charging, the LED indicator will shine red.
2
3
When it is fully charged, the LED indicator will go off and the Micro USB
charging cable can be removed.
Use the aux audio cable to
listen from an external device
Please use the AUX audio cable to connect the external device to the
AUX jack.
1
Connect the AUX audio cable and it will automatically enter external
audio mode.
3
2
Then music can be played from the external device.
Note
The speaker can be connected to audio players such as
MP3/PC/smartphones etc.
What is bluetooth
wireless technology?
Maximum communication range
Maximum communication range may shorten under the following conditions.
•There is an obstacle such as a person, metal, or wall between the system and
BLUETOOTH device.
•A wireless LAN device is in use near the system.
•A microwave oven is in use near the system.
•A device that generates electromagnetic radiation is in use near the system.
Interference to other devices
Microwaves emitting from a BLUETOOTH device may affect the operation of electronic
medical devices. Turn off the system and other BLUETOOTH devices in the following
locations, as it may cause an accident.
•where in flammable gas is present, in a hospital, train, airplane, or a gas station
•Near automatic doors or a fire alarm
•To be able to use the BLUETOOTH function, the BLUETOOTH device to be connected requires
the same profile as the system’s. Note also that even if the same profile exists, devices may
vary in function depending on their specifications.
•Due to the characteristic of BLUETOOTH wireless technology, the sound played on the system
is slightly delayed from the sound played on the BLUETOOTH device during talking on the
telephone or listening to the music.
•T his system supports security capabilities that comply with the BLUETOOTH standard to provide
a secure connection when the BLUETOOTH wireless technology is used, but security may not
be enough depending on the setting. Be careful when communicating using BLUETOOTH
wireless technology.
•We do not take any responsibility for the leakage of information during BLUETOOTH
communication.
•A device featuring the BLUETOOTH function is required to conform to the BLUETOOTH standard
specified by Bluetooth SIG, and be authenticated. Even if the connected device conforms to the
above mentioned BLUETOOTH standard, some devices may not be connected or work correctly,
depending on the features or specifications of the device.
•Noise or sound skips may occur depending on the BLUETOOTH device connected with the
system, the communication environment or the usage environment.
BLUETOOTH wireless technology is a shortrange wireless technology that enables wireless
data communication between digital devices, such as a computer and digital camera.
BLUETOOTH wireless technology operates within a range of about 10m.
Connecting two devices as necessary is common, but some devices can be connected
to multiple devices at the same time.
You do not need to use a cable for connection, nor is it necessary for the devices to face
one another, such is the case with infrared technology. For example, you can use such
a device in a bag or pocket.
BLUETOOTH standard is an international standard supported by thousands of
companies all over the world, and employed by various companies worldwide.
Note
•
Please stop playback on the Bluetooth device before executing the pairing
process. When Bluetooth connection is established, louder sounds will
be outputted. Also, after the connection is established, louder sounds
might be outputted as will during initial playback operations; therefore
it is recommended to decrease the volume before start playing.
•Use the music player software on the Bluetooth device
(such as smartphone or PC etc.) to play music.