Gibraltar Building Products CC8B, CC4B, CC6T, CC8T Operating instructions

Hello! I am an AI chatbot trained to assist you with the Gibraltar Building Products CC8B Operating instructions. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!

Kitchen

Exhaust

Bathroom

Exhaust

TYP. 6-8"

TYP. 4"

Gibraltar Code Cap and Base combinations are adjustable for use on flat roofs to 5/12 pitch. Code Caps are

tested and approved on Type “B” Gas Vents. 24 gauge Type 3003 Aluminum.

1. Shingle up to the exhaust pipe then slip on base

flashing. Secure with 6 roofing nails.

2. Align Cap Slots with Base Tabs, then Lower cap onto

conical base.

3. Adjust the top piece to make it straight and level,

then bend the tabs over to secure it in place.

CODE CAP & BASE

INSTALLATION GUIDELINES

These basic installation guidelines are for use with typical or standard applications. It is always recommended to seek advice from a licensed

professional, and to check with your local building inspector or building permit office for approvals and possible variations that may apply.

CAUTION!

Working above grade is inherently dangerous, be sure that proper fall protection measures are in place.

When working with power tools and sheet metal, gloves and eye protection are absolutely required.