Assembly Instructions
Nantucket Table & Chair Set - Pastel
PARTS LIST:
HARDWARE
Step 1
Pink Chair Assembly
Step 2
Pink Chair Assembly
Step 3
Pink Chair Assembly
1
1
2
3
4
4
5
A
A
A
A
F
F
A
F
A
F
F
x 4
x 4
6
*Repeat steps 1 through 3
for sky, buttercup, and
sage chair assembly.
Pink
Sage
Sky
Buttercup
x 4
Pink
Sage
Sky
Buttercup
x 4
Pink
Sage
Sky
Buttercup
x 4
Pink
Sage
Sky
Buttercup
White Table
2
3
Step 5
Table Assembly
G
5
6
6
6
6
A. Pink Cross Dowel Bolt
x 8 pcs
9/16 inches/40mm
B. Sky Cross Dowel Bolt
x 8 pcs
9/16 inches/40mm
C. Buttercup Cross Dowel
Bolt x 8 pcs
9/16 inches/40mm
D. Sage Cross Dowel Bolt
x 8 pcs
9/16 inches/40mm
Allen Wrench x 1 pc
G. Washer x 8 pcs
The following tool (not
included) is required for
assembly:
Flathead screwdriver
F. Cross Dowel Nut
x 32 pcs
E. Threaded Rod x 8 pcs
7
x 4
Pink
Sage
Sky
Buttercup
Step 4
Table Leg
Assembly
*Be sure notch
in Part H, faces in
towards rod.
*Repeat for 3
other legs
A
F
F
A
7
H. Dowel Anchor x 4 pcs
I. Lock Nut x 8 pcs
Wrench x 1 pcs
E
E
I
J. Wood Dowel x 24 pcs
J
J
G
I
H
J
J
J
J
Customer Service
1-800-933-0771
www.kidkraft.com
1
USE AND MAINTENANCE:
-Use on level surfaces only
-Please check assembly at regular intervals, and frequently
tighten hardware if necessary. If maintenance is not carried out,
the product could cease to function properly
Item #26101B
Please retain this information for future reference
© 2009 KidKraft, LP
To order replacement parts, please visit www.kidkraft.com
CAUTION: Adult Assembly Required. Hardware
contains small screws with sharp points. Keep
unassembled parts out of reach of small children.
WARNING: CHOKING HAZARD
Small parts and sharp points, not
suitable for children under 3 years.
Helpful Hint: Check all
predrilled holes for excess
sawdust and clean out the
holes with a flathead
screwdriver if necessary.
/
