Installation Guide
R
R
If you have any questions or need help.
1 Unscrew components A & B. to the seal.
4 Connect the rear end of the drain to the Drain Pipe.
2 Silde the drain body(C) through the hole
in the sink.
5 Push to activate.
3 Screw components A & B back on as shown.
C
A
B
ยท Please avoid using plumber's putty. The seal on top is leak-free. Plumber's putty might cause damage.
-
1
PARLOS HOME FURNISHING CO.,LTD Push & Seal Pop Up Drain Assembly Stopper for Bathroom Sink User manual
- Type
- User manual
- This manual is also suitable for
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI