VERSION 1.1
Top mount sink installation
2. Cut along the top-mount line.
1. Verify cabinet clearance.
3. Insert the clips into the channels.
Wipe away any
excess sealant.
6.
Insert the sink.
A
Tighten to secure sink.
C
Rotate the clip.
B
4. Drill pilot hole and then cut the countertop opening.
(must be done by professional)
5. Verify fit. Adjust cutout if needed.
7. Apply silicone sealant.
8. Install the strainer(s).
(bottom view)
CHANNEL
MOUNTING
CLAMP
SINK
FASTENER
COUNTERTOP
SILICONE CAULK
(NOT FURNISHED)
A
B
KTM SERIES
KTM-24 | KTM-25 | KTM-32 | KTM-33
VERSION 1.1
/
