Vax Dust & Vac Corded Hard Floor Owner's manual

Brand: Vax

Model: Dust & Vac Corded Hard Floor

Type: Owner's manual

vax.co.uk

HF86-DV-A

Dust & Vac

Let’s get started

Thank you for buying this Dust & Vac.

Taking care of your hard oors

The Dust & Vac is designed to make cleaning sealed hard oors regularly, as eective and

ecient as possible and this user guide will help you get the most out of your machine.

Maintaining your hard oors will ensure they keep their appearance for longer and smell fresh

and clean. You’ve chosen hard oors for your home for a reason and Vax will help you take good

care of them.

Taking care of your Dust & Vac

Also inside this guide are instructions on maintaining your new machine, so that it’s always ready

when you are, to tackle your hard oors.

This Dust & Vac is intended for household use

only and NOT for commercial or industrial use.

• This Dust & Vac does not stay upright without

constant support.

• Only use the Dust & Vac indoors and keep the area you’re

cleaning well lit.

• Keep ngers, hair and loose clothing from moving parts and

openings whilst using the Dust & Vac.

• This appliance can be used by children aged from 8 years and

above and persons with reduced physical, sensory or mental

capabilities or lack of experience and knowledge if they have

been given supervision or instruction concerning use of the

appliance in a safe way and understand the hazards involved.

• Children shall not play with the appliance. Cleaning and user

maintenance shall not be made by children without supervision.

• Only Vax recommended tools and accessories should be used

with this Dust & Vac.

Basic safety precautions

3 Always make sure the lter and dirt container are tted

correctly before using your Dust & Vac.

3 Always turn o and unplug the Dust & Vac before carrying out

any maintenance.

3 Turn o all controls on the Dust & Vac before disconnecting or

connecting the power cord. After use always wrap the power

cord around the cord clips provided.

3 Take extra care when cleaning on the stairs.

3 Always replace the fuse in the plug with a 13amp fuse.

3 Always protect the power cord from heated surfaces or near

open ames.

3 Use only CE approved 13amp extension cords, non-approved

extension cords may overheat. Care should be taken to arrange

the extension cord as it can be a trip hazard.

3 Always carry the Dust & Vac by the handle.

3 Store your Dust & Vac in a cool, dry area.

Don’ts

Do’s

8 Don’t use this Dust & Vac if it has been dropped, damaged,

immersed in water or left outdoors.

8 Don’t run over the power cord or use Dust & Vac if the power

cord or plug is damaged. Please contact our Customer

Care Line on: 0844 4128 455 (Mon-Fri 08:30-18:30

Sat 09:00-17:00).

8 Don’t handle the plug or use the Dust & Vac with

wet hands.

8 Don’t throw the Dust & Vac into re or expose to

high temperatures.

8 Don’t pull or carry this Dust & Vac by the power cord.

8 Don’t use the power cord as a handle, pull the power cord

around corners or sharp edges or close a door over the

power cord.

8 Don’t unplug Dust & Vac by pulling on the power cord.

8 Don’t attempt to remove blockages with sharp objects as this

may cause damage to your Dust & Vac.

8 Don’t use the Dust & Vac with incorrect voltage as this may

result in damage or injury to the user. The correct voltage is

listed on the ratings label.

8 Don’t vacuum up hot coals, cigarette butts, matches or smoking

hot burning items or use in an area where there may be

harmful uids (chlorine, bleach, and ammonia drain cleaner).

Let’s talk safety

Taking care of you

We’re here if you need us. Instead of taking me back

to the shop, simply visit:

vax.co.uk/support or call:

(UK) 0844 412 8455 (ROI) 1-800 928 308

Monday-Friday 8.30am to 6.30pm, Saturday 9.00am to 5.00pm

Calls are charged at the UK local rate. Before you call we’ll need you to have the following information

to hand: your machine, your proof of purchase or warranty registration code

Alternatively, you can write to us at:

Vax Ltd., Kingswood Road, Hampton Lovett, Droitwich, Worcestershire, WR9 0QH, UK

Let us know what you think @VaxUK

Please keep instructions for further use.

Contents

Let’s talk safety

Getting to know your machine

Getting started

Using your machine

Taking care of your machine

What to do if it goes wrong

Getting in touch

Getting to know your machine

Microbre grab pad

Dust & Vac

Included with

your machine

Power cord

Name Dust & Vac

Code HF86-DV-A

Part Number 1-1-133419-00

Voltage 220-240V ~50Hz

Wattage 150W

Cord length 6m

Weight 1.97kg

Filters

Filter (Type 84)

1-1-133596-00

Quick Clean Microbre Pads (Type 1)

1-1-133266-00

Technical Specication

Subject to technical change without notice.

Storage hook

Power button

Upper handle

Dirt container

release button

Vacuum nozzle

p01

p04

p05

p06

p07

p09

p10

Filter

Dirt container

Frame for cleaning pad

Assembling your hard oor cleaner

Depress the power

button to turn machine

on and o

Use the microbre pad to pick up ne

debris like dirt, dust and pet hair. Use

vacuum to suck up any left over debris

Getting started Using your machine

PLEASE READ ‘LET’S TALK SAFETY’ AT THE BEGINNING BEFORE USE

IMPORTANT: Always support Dust & Vac during use

NOTE: This machine is not free standing

Push the handle into the

main body until it locks

into place

Plug into mains socket

Slide the frame of your machine into the cleaning pad

pocket one side at a time

Emptying the Dirt Container

Xxxxxxxxxxxxx

Xxxxxxxxxxxxx Xxxxxxxxxxxxx Xxxxxxxxxxxxx

Xxxxxxxxxxxxx

Gently push the lter into

the dirt container

To ret the dirt container tilt so that the bottom aligns

rst, then gently push until it locks into place

Grasp the center tab on

the lter and pull out of

the dirt container

To empty the Dust & Vac

depress the release button to

remove the dirt container

Empty contents from the

container, shake and lightly

tap lter against bin to

remove remaining dirt

05 06

Depress the release

button to remove the

dirt container

Check dirt air path is clear of dust and debris above the

dirt container and below the base of Dust & Vac

Storage

Taking care of your machine Taking care of your machine

After use wrap power cord

around cord clips provided

Important: Store in a cool dry area

Important: DO NOT USE BLEACH or FABRIC SOFTENER. For best results, wash the microbre cloth after every use

Always switch o and unplug Dust & Vac

before carrying out any maintenance.

Ensure lter is fully dry (at least 24

hours drying time) before retting into

the dirt container and is replaced every

6 months.

NOTE

Switch o and unplug

Use storage hook to hang

Dust & Vac where it can

easily be stored

Depress the release button

to remove the dirt container

Hold lter under warm

running water (max 40° C)

to rinse. DO NOT use soap/

detergent. Tap excess water

out of lter

Gently push the dry lter

back into the dirt container

Allow lter to COMPLETELY

DRY for at least 24 hours

before retting into the

dirt container

To ret the dirt container

tilt so that the bottom

aligns rst, then gently

push until it locks

into place

Grasp the center tab on

the lter and pull out of

the dirt container

Shake and lightly tap the

lter against the bin to

remove dirt

Maintaining your lter

Maintaining your Microbre grab pad

Machine washable at warm temperature (40°C max).

Always use a mild detergent and lay at to dry completely

before re-using

For best results tap out lter after every use and wash periodically

Clearing a blockage

40°C MAX

07 08

24hr

• Check the ‘This pack contains’ panel on the box to make

sure the part is included with your machine.

• Ensure the handle is tted correctly and pushed fully on to

the main body.

• Check the fuse in the plug. Always replace the fuse in the plug

with a British 13amp fuse.

• Dirt container may be full and may need to be emptied.

• Filter may need to be washed please allow 24 hours to dry

before retting.

• Clear any blockages from the machine. (See page 8)

• Empty dirt container, remove and wash lter allowing

24 hours to dry before retting.

• Dirt container may not be tted correctly. To ret the dirt

container tilt so that the bottom aligns rst, and then gently

push until it locks into place.

• Clear any blockages from the machine. (See page 8)

SolutionProblem

What to do if it goes wrong Getting in touch

There is an

accessory missing

Dust & Vac will not

switch on

Dust & Vac won’t pick

up or poor suction

Dust escaping from

Dust & Vac

* Calls are charged at the UK local rate. Please make a note of the serial number and model number of the vacuum cleaner

before calling.

09 10

Vax Ltd., Kingswood Road, Hampton Lovett, Droitwich, Worcestershire, WR9 0QH, UK

email: inf[email protected] website: vax.co.uk

Version 1.0

EEC Statement of Compliance: Manufacturer/EEC importer: Vax Limited, hereby on our own responsibility,

declare that the HF86-DV-A Dust & Vac is manufactured in compliance with the following Directives:

Safety: 2006/95/EC Low Voltage Directive. EMC: 2004/108/EC Electromagnetic Compatibility Directive

Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist.

Check with your Local Authority or retailer for recycling advice.

@VaxUK

Vax Dust & Vac Corded Hard Floor Owner's manual

Vax Dust & Vac Corded Hard Floor Owner's manual

Vax Dust & Vac Corded Hard Floor Owner's manual

Related papers

Other documents