River of Goods 16158 Installation guide

ASSEMBLY INSTRUCTIONS

1. Carefully layout all parts in a line on a smooth surface.

2. Locate the screw that is on top of the base. Unscrew the screw and take out the shade.

3. Install bulb (not included).

CAUTION - Refer to the wattage caution label located near the lamp holder for the maximum

wattage-do not exceed the maximum wattage.

WARNING - Do not attempt to replace the bulb(s) while the lamp is plugged into a wall receptacle.

4. Attach the shade onto base and over the socket, secure the top of the shade with the screw.

5. Insert the polarized plug to wall outlet and use the switch to turn the lamp on or off.

IMPORTANT SAFETY INSTRUCTIONS

This portable lamp has a polarized plug (one blade is wider than the other) as a feature to reduce the risk

of electric shock. This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the

outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Never use with an extension

cord unless plug can be fully inserted. Do not alter the plug.

MADE IN CHINA

Note: The diagram illustrates the installation of your new luminaire. This is a representative drawing

and is not intended to match the style of your luminaire.

Note: This stained glass product has been protected with mineral oil as part of the finishing process.

Please use a soft dry cloth to remove any excess oil.