Homepop K6381-A727 Installation guide

A 1PC B 2PCS C 1PC D 1PC

E 8PCS F 8PCS G 8PCS H 1PC

φ5/16"*45mm φ8㎜ φ22㎜ 5MM

I 1PC J 4PCS

ASSEMBLY INSTRUCTION

ATTENTION:

WHEN YOU ASSEMBLE, PLEASE DO NOT TIGHTEN EACH

SCREW UNTIL ALL SCREWS ARE LINED UP WITH THE FRAME.

ITEM NO. K6381

Front Leg

Left back Leg

Right back Leg

Front Leg

Right

back Leg

Insert front leg (B) into the bottom of

seat frame (A). Use washers and

bolts to tighten up using tool (H).

Insert Right back leg

(D) into bottom of

seat frame (A). Use

washer and bolts to

tighten up using tool

(H).

Do this same process

for Left back leg (C).

Turn ottoman frame (I) over.

There will be 4 holes in each

corner. Insert wood leg (J) into

one hole and tighten by turning

clockwise. Do this for all 4 legs.

Turn item over for use.