Modine HD60A Installation guide

Type
Installation guide
Features To Consider When Selecting
A Separated Combustion Unit Heater:
HDS
Complete Separated Combustion Unit
from the Factory
Unlike other separated combustion models on the market today, all Modine HDS units
ship ready to go. No additional work or components are required to make the unit
separated combustion after it leaves the factory.
Full Model Line from
30,000 to 125,000 BTU/hr
A full model line allows for application flexibility and meeting the needs of the space in
the most efficient way possible.
Most CFM
The HDS has greater airflow and installation height variance thanks to higher CFM.
In-shot Burners on Each Heat
Exchanger Tube
Provides reliability, performance, ease of serviceability, and low sound levels on flame
ignition and extinction.
Fans Engineered for Quiet Operation
Lower noise means happier occupants. (see chart below)
409 Stainless Steel Heat
Exchanger Available
Stainless steel heat exchangers offer greater durability, especially in the harsh
environments that separated combustion units thrive in.
RAISE YOUR COMFORT LEVEL
When working indoors, you want to ensure you have plenty of fresh air to breathe. Modine’s
separated combustion Hot Dawg unit heater draws its combustion air from the outside to
ensure the air is clean to breathe. This fresh air supply reduces common concerns about
dusty, dirty, or humid applications. Additionally, by drawing the combustion air from
the outside, the overall heating efficiency increases. Check out the features below that
make Modine’s separated combustion Hot Dawg unit heater rise above the competition.
©2013 Modine Manufacturing Co. 6-119.1
MODINE’S SEPARATED COMBUSTION
HOT DAWG IS THE IDEAL SOLUTION
WHEN IT COMES TO BRINGING COMFORT
TO YOUR GARAGE OR WORKSPACE.
To learn more about the Hot Dawg, go to www.ModineHVAC.com/HotDawg
or call your nearest authorized Modine distributor today. You can also call
Modine at 800-828-HEAT.
Follow us on Twitter @ModineHVAC
Model HD/HDS Sound Pressure Level (dBA)
1
Model Size Distance
Modine Competitor
2
30 5 feet 53 59
45 5 feet 57 59
60 5 feet 59 59
75 5 feet 58 69
100 10 feet 50 58
100 15 feet 48 54
125 10 feet 58 59
125 15 feet 57 55
1. Measured at distance from unit shown
2. Competitor published data.
  • Page 1 1

Modine HD60A Installation guide

Type
Installation guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI