Yamaha HTR-3065 Installation guide

Brand: Yamaha

Model: HTR-3065

Category: AV receivers

Type: Installation guide

Yamaha HTR-3065 is an AV receiver that offers immersive surround sound for an enhanced home theater experience. With its 5.1-channel system, you can connect multiple speakers to create a dynamic soundscape that brings movies, music, and games to life. The unit supports various audio formats, including Dolby Digital and DTS, ensuring high-quality audio reproduction. It also features HDMI connectivity, allowing for seamless integration with modern TVs and Blu-ray players.

English

Español

Easy Setup Guide

Guía de configuración sencilla

AV Receiver/Receptor AV

RLH

En 1

Check that the following accessories are supplied with the product.

The following cables (not supplied) are required to build the system described in this

document.

• Speaker cables (x5)

• HDMI cable (x2)

• Audio pin cable (x1)

• Digital optical cable (x1)

(not required if your TV supports ARC [Audio Return Channel])

1 Preparation

Accessories

 Remote control  Batteries

(AAA, R03, UM-4) (x2)

Insert the batteries the right way round.

 AM antenna  FM antenna  YPAO microphone

 CD-ROM

(Owner’s Manual)

 Safety Brochure  Easy Setup Guide

• The illustrations of the remote control used in this guide are of the U.S.A. model.

• (Australia model only)

For information on how to control external devices with the remote control, refer to “Supplement for

Remote Control” on the supplied CD-ROM.

Cables required for connections

*The supplied FM antenna

varies depending on the

region of purchase.

Easy Setup Guide

English

AV Receiver

This document explains how to set up a 5.1-channel system

and play back surround sound from a BD/DVD on the unit.

To reduce the impact on natural resources, the Owner's Manual for this product

is supplied on CD-ROM. For more information about this product, refer to the

Owner's Manual on the supplied CD-ROM.

PDF versions of this guide and “Owner’s Manual” can be downloaded from the

following website.

http://download.yamaha.com/

HTR-3065_esg_C.fm Page 1 Wednesday, December 21, 2011 4:01 PM

2 En

Set up the speakers in the room using the following diagram as a reference.

For information on other speaker systems, refer to “Owner’s Manual”.

2 Placing speakers

1 Front speaker (L)

2 Front speaker (R)

3 Center speaker

4 Surround speaker (L)

5 Surround speaker (R)

9 Subwoofer

10° to 30°10° to 30°

HTR-3065_esg_C.fm Page 2 Wednesday, December 21, 2011 4:01 PM

En 3

■ Connecting speaker cables

Speaker cables have two wires. One is for connecting

the negative (-) terminals of the unit and the speaker,

and the other is for the positive (+) terminals. If the wires

are colored to prevent confusion, connect the black wire

to the negative and the other wire to the positive

terminals.

(Connecting front speakers)

a Remove approximately 10 mm (3/8”) of insulation from

the ends of the speaker cable and twist the bare wires of

the cable firmly together.

b Loosen the speaker terminal.

c Insert the bare wires of the cable into the gap on the side

(upper right or bottom left) of the terminal.

d Tighten the terminal.

Using a banana plug

(U.S.A., Canada, Australia and General models only)

a Tighten the speaker terminal.

b Insert a banana plug into the end of the terminal.

(Connecting center/surround speakers)

a Remove approximately 10 mm (3/8”) of insulation from

the ends of the speaker cable and twist the bare wires of

the cable firmly together.

b Press down the tab.

c Insert the bare wires of the cable into the hole in the

terminal.

d Release the tab.

Connect the front speakers (1/2)

to the FRONT (//\) terminals.

3 Connecting speakers/subwoofer

• (U.S.A. and Canada models only)

Under its default settings, the unit is configured for 8-ohm

speakers. When connecting 6-ohm speakers, set the unit’s

speaker impedance to “6 Ω MIN”. For details, see “Setting the

speaker impedance” in “Owner’s Manual”.

• Use a subwoofer equipped with built-in amplifier.

• Before connecting the speakers, remove the unit’s power cable

from the AC wall outlet and turn off the subwoofer.

• Ensure that the core wires of the speaker cable do not touch

each other or come into contact with the unit’s metal areas. This

may damage the unit or the speakers. If the speaker cables

short circuit, “Check SP Wires” will appear on the front display

when the unit is turned on.

FRONT

- (black)

+ (red)

RON

Banana plug

CENTER

+ (red)

- (black)

FRONT

SURROUND

SUBWOOFER

CENTER

SPEAKERS

The unit (rear)

HTR-3065_esg_C.fm Page 3 Wednesday, December 21, 2011 4:01 PM

4 En

Connect the center speaker (3) to the

CENTER terminal.

Connect the surround speakers

(4/5) to the SURROUND (//\)

terminals.

Connect the subwoofer (9) to the

SUBWOOFER jack.

FRONT

SURROUND

SUBWOOFER

CENTER

SPEAKERS

The unit (rear)

FRONT

SURROUND

SUBWOOFER

CENTER

SPEAKERS

The unit (rear)

FRONT

SURROUND

SUBWOOFER

CENTER

SPEAKERS

The unit (rear)

Audio pin cable

HTR-3065_esg_C.fm Page 4 Wednesday, December 21, 2011 4:01 PM

En 5

4 Connecting external devices

FRONT

OPTICAL COAXIAL COAXIAL OPTICAL

(

)

(

)

COMPONENT

VIDEO

AUD

IO 1

AUD

IO 2

MONITOR OUT

OUT

AUDIO

COMPONENT

VIDEO

MONITOR OUT

HDMI 1

(

BD/DVD

)

HDMI 2 HDMI 3

HDMI 4

HDMI

OUT

ARC

ANTENNA

SURROUND

SUBWOOFER

CENTER

SPEAKERS

YPAO MIC

INFO

MEMORY

PRESET

FM AM

TUNING

PHONES

SILENT

CINEMA

VIDEO

VOLU ME

AUX USB

TONE

CONTROL

STRAIGHT

DVD

RADIO

INPUT

PROGRAM

SCENE

VIDEO

iPod/iPhone 5V 1A

AUDIO

HDMIOPTICAL

HDMI

OUT

ARC

HDMI HDMI

HDMI

OPTICAL

HDMI 1

(

BD/DVD

)

VOLTAGE

SELECTOR

110 V

120V

220V

240V

(

)

AV 4

Audio out

(optical)

HDMI in HDMI out

BD/DVD player

HDMI OUT

jack

HDMI 1 jack

AV 4 (OPTICAL) jack

The unit (rear)

To an AC wall

outlet

Turn on the unit

The unit (front)

VOLTAGE SELECTOR

(General model only)

Connect external devices to the unit.

a Connect a BD/DVD player to the unit with an HDMI

cable.

If the BD/DVD player is currently connected to the

TV directly with an HDMI cable, disconnect the

cable from the TV and connect it to this unit.

b Connect a TV to the unit with the other HDMI cable.

c Connect a TV to the unit with a digital optical cable.

This connection is required to play back TV audio

on the unit. This connection is not required if your

TV supports ARC (Audio Return Channel).

d Connect the power cable to an AC wall outlet.

• For information on how to connect radio antennas or other

external devices, see “PREPARATIONS” in “Owner’s Manual”.

Turn on the unit, the TV and the BD/DVD

player.

Use the TV remote control to change the

TV input to video from the unit.

The connections are complete. Proceed to the next

page to optimize the speaker settings.

• By connecting a TV to the unit with an HDMI cable, you can

configure the unit’s settings with the menu displayed on the TV. In

addition, you can select the on-screen menu language from English

(default), French, German, Spanish, Russian and Chinese. For

details, refer to “Owner’s Manual”. In this guide, illustrations of

English menu screens are used as examples.

Before connecting the power cable (General model only)

Make sure you set the switch position of

VOLTAGE SELECTOR according to your local voltage.

Voltages are AC 110-120/220-240 V, 50/60 Hz.

HTR-3065_esg_C.fm Page 5 Wednesday, December 21, 2011 4:01 PM

6 En

The Yamaha Parametric room Acoustic Optimizer (YPAO) function detects speaker connections, measures the

distances from them to your listening position(s), and then automatically optimizes the speaker settings, such as

volume balance and acoustic parameters, to suit your room.

Preparing for YPAO

Optimizing the speaker settings automatically (YPAO)

• During the measuring process, test tones are output at high volume. Ensure that

the test tones do not frighten small children. Also, refrain from using this function at

night when it may be a nuisance to others.

• During the measuring process, you cannot adjust the volume.

• During the measuring process, keep the room as quiet as possible.

• Do not connect headphones.

• Do not stand between the speakers and the YPAO microphone during the

measurement process (about 3 minutes).

• Move to the corner of the room or leave the room.

Connect the YPAO microphone to the

YPAO MIC jack on the front panel.

The following screen appears.

• To cancel the operation, disconnect the YPAO microphone, or

use the cursor keys to select “Exit” and press ENTER, before

starting the measurement.

To start the measurement, press SETUP.

The measurement will start in 10 seconds.

The following screen appears on the TV when

the measurement finishes.

Auto Setup

Start

Exit

Press SETUP key

to Start

VOL.

[SETUP]:Start

Auto Setup

Start

Exit

Measurement

Finished

Result

3 / 2 / 0.1 ch

3.0 / 10.5 m

-3.0 / 10.0 dB

VOL.

Finished

VOLUME HIGH CUT

CROSSOVER/

MIN MAXMIN MAX

1234

512

INFO

MEMORY

PRESET

TUNING

SCENE

OPTION

SETUP

RETURN

VOLUME

DVD

RADIO

MUTE

ENTER

TRANSMIT

RECEIVER

HDMI

AUDIO

TUNER

SLEEP

USB

MODE

V-AUX

MOVIE MUSIC

SUR. DECODE STRAIGHT

ENHANCER

1 4

MEM

RESE

UNIN

PTI

RET

RAN

RECEIVER

HDM

AUDI

TUNER

LEEP

V-

MOVIE MUSI

UR. DECOD

TRAIGHT

NHAN

The unit (front)

Place the YPAO microphone at your

listening position (same height as your

ears). We recommend the use of a

tripod as a microphone stand. You can

use the tripod screws to fix the

microphone in place.

YPAO microphone

Listening position

Ear height

Cursor keys

ENTER

Turn on the subwoofer and set

the volume to half. If the

cross-over frequency is

adjustable, set it to maximum.

SETUP

HTR-3065_esg_C.fm Page 6 Wednesday, December 21, 2011 4:01 PM

En 7

• If any error message (such as E-1) or warning message (such

as W-2) appears, see “Error messages” or “Warning

messages” in “Owner’s Manual”.

• If the warning message “W-1:Out of Phase” appears, see “If

“W-1:Out of Phase” appears”.

Use the cursor keys to select “SAVE”

(Save) and press ENTER.

Disconnect the YPAO microphone from the

unit.

This completes optimization of the speaker settings.

Follow the procedure below to check the speaker

connections.

Depending on the type of speakers or room

environment, this message may appear even if the

speakers are connected correctly.

a Check for the blinking of the front display’s indicator to

identify the problem speaker.

b Check the cable connections (+/-) of the problem

speaker.

If the speaker is connected correctly:

You can save the current settings.

Proceed to step 3.

If the speaker is connected incorrectly:

Turn off the unit, reconnect the speaker cable, and then

try YPAO measurement again.

• The YPAO microphone is sensitive to heat, so should not be

placed anywhere where it could be exposed to direct sunlight or

high temperatures (such as on top of AV equipment).

Auto Setup

Start

Exit

Measurement

Finished

Result

3 / 2 / 0.1 ch

3.0 / 10.5 m

-3.0 / 10.0 dB

SAVE

VOL.

>SaveCancel

If “W-1:Out of Phase” appears

Warning

message

Auto Setup

Start

Exit

Measurement

Finished

Result

3 / 2 / 0.1 ch

3.0 / 10.5 m

-3.0 / 10.0 dB

W-1:Out of Phase

VOL.

W-1:PHASE

Problem speaker (blinks)

HTR-3065_esg_C.fm Page 7 Wednesday, December 21, 2011 4:01 PM

8 En

Now let’s play back a BD/DVD.

We recommend playing back multichannel audio

(5.1-channel or more) to feel surround sound produced

by the unit.

Press HDMI 1 to select “HDMI 1” as the

input source.

Start playback on the BD/DVD player.

Press STRAIGHT repeatedly to select

“STRAIGHT”.

• When “STRAIGHT” (straight decode) is enabled, each

speaker produces each channel audio signal directly (without

sound field processing).

Press VOLUME to adjust the volume.

This completes the basic setup procedure.

Sound is only being output from the front speakers

during multichannel audio playback

Check the digital audio output setting on the BD/DVD

player.

It may be set to 2-channel output (such as PCM).

No sound is coming from a specific speaker

See “Troubleshooting” in “Owner’s Manual”.

6 Playing back a BD/DVD

1234

512

INFO

MEMORY

PRESET

TUNING

SCENE

OPTION

SETUP

RETURN

VOLUME

DVD

RADIO

MUTE

ENTER

TRANSMIT

RECEIVER

HDMI

AUDIO

TUNER

SLEEP

USB

MODE

V-AUX

MOVIE MUSIC

SUR. DECODE STRAIGHT

ENHANCER

MEM

RESE

UNIN

PTI

RET

ENTE

RAN

RECEIVER

HDM

AUDI

TUNER

LEEP

V-

MOVIE MUSIC

UR. DECOD

NHAN

HDMI 1

STRAIGHT

VOLUME

If surround sound is not working

SL SR

HDMI1

VOL.

STRAIGHT

SL SR

Volume -30.0dB

VOL.

Many more features!

The unit has various other functions.

Please refer to “Owner’s Manual” on the supplied

CD-ROM to help you get the most out of the unit.

Connecting other playback

devices

Connect audio devices (such as CD player),

game consoles, camcorders, and many others.

Selecting the sound mode

Select the desired sound program (CINEMA

DSP) or surround decoder suitable for movies,

music, games, sports programs, and other

uses.

Playing back from iPod

By using a USB cable supplied with iPod, you

can enjoy iPod music on the unit.

■

Listening to FM/AM radio

■ Playing back music stored on

a USB storage device

For more information, see “What you can do

with the unit”.

HTR-3065_esg_C.fm Page 8 Wednesday, December 21, 2011 4:01 PM

Page is loading ...

4 Es

Conecte el altavoz central (3) al

terminal CENTER.

Conecte los altavoces surround

(4/5) a los terminales

SURROUND (//\).

Conecte el altavoz de subgraves

(9) a la toma SUBWOOFER.

FRONT

SURROUND

SUBWOOFER

CENTER

SPEAKERS

La unidad (parte trasera)

FRONT

SURROUND

SUBWOOFER

CENTER

SPEAKERS

La unidad (parte trasera)

FRONT

SURROUND

SUBWOOFER

CENTER

SPEAKERS

La unidad (parte trasera)

Cable de audio con clavija

HTR-3065_esg_RLH.fm Page 4 Friday, January 20, 2012 9:56 AM

Page is loading ...

Yamaha HTR-3065 Installation guide

Brand: Yamaha

Model: HTR-3065

Category: AV receivers

Type: Installation guide

Download PDF

report

in other languages

español: Yamaha HTR-3065 Guía de instalación

Yamaha HTR-3065 Installation guide

Yamaha HTR-3065 Installation guide

in other languages

Related papers

Other documents