ZyXEL P-2302HWUDL-P1 User manual

Brand: ZyXEL

Model: P-2302HWUDL-P1

Category: Networking

Type: User manual

ZyXEL P-2302HWUDL-P1 is a router with IEEE 802.11g wireless capability. It has a built in DECT GAP base station for compatibility with DECT cordless phones, USB 2.0 ports for sharing files via USB compatible storage devices and phone ports for making calls over the Internet (Voice over IP or VoIP). The P2302HWUDL-P1 can use regular phone services through regular (PSTN) phone lines and can also function as a print server. It is easy to set up and use, and it comes with a variety of features that make it a great choice for home or small office use.

P-2302HWUDL-P1

802.11g Wireless VoIP Station Gateway

with Built-in DECT Base Station

Quick Start Guide

Version 3.60

Edition 1

3/2007

P-2302HWUDL-P1 Quick Start Guide

Overview

The P-2302HWUDL-P1 model is a router with IEEE 802.11g wireless capability. It has a built in DECT GAP

base station for compatibility with DECT cordless phones, USB 2.0 ports for sharing files via USB compatible

storage devices and phone ports for making calls over the Internet (Voice over IP or VoIP). The P-

2302HWUDL-P1 can use regular phone services through regular (PSTN) phone lines and can also function as

a print server.

1 Requirements

Make sure you have the following things before you set up your P-2302HWUDL-P1.

• Internet access - account information provided by your ISP, such as user name, password, and so on.

• VoIP account - You need the account information provided by your VoIP service provider (the company that lets

you make phone calls over the Internet). This information might include your URI, number, and so on.

• Internet Explorer 6.0 or later or Netscape Navigator 7.0 or later, with JavaScript enabled.

Note: See the User’s Guide for all configuration details including file sharing and setting up a shared

printer.

P-2302HWUDL-P1 Quick Start Guide

2 Hardware Connections - P-2302HWUDL-P1

1WAN: Use an Ethernet cable to connect the DSL modem to this port.

2LINE: Use the green PSTN cable to connect the TEL or PHONE jack on a splitter to this port. If no splitter is

provided connect the telephone jack to this port.

Note: When the ZyXEL Device does not have power, only the phone connected to the PHONE 1 port

can be used for making calls. Ensure you know which phone this is, so that in case of emergency

you can make outgoing calls.

3 ETHERNET 1-4: Use an Ethernet cable to connect a computer to this port for initial configuration and/or

Internet access.

4 PHONE 1-2: Use telephone cables (and any telephone adaptors provided with your P-2302HWUDL-P1) to

connect your telephones to these ports. If you only have one telephone, you should use port 1.

P-2302HWUDL-P1 Quick Start Guide

5USB 2.0: Use a USB cable (not provided) to connect a USB (version 2.0 or lower) printer to this port.

6 USB 2.0: Connect a USB (version 2.0 or lower) memory stick for file sharing. The P-2302HWUDL-P1

automatically detects the USB device.

7 Use the power adaptor provided with your P-2302HWUDL-P1 to connect an appropriate power source to

this socket.

Look at the lights on the side panel of the P-2302HWUDL-P1.

•The POWER light blinks during start-up and is green once the P-2302HWUDL-P1 is ready.

• Each ETHERNET light turns on if the corresponding ETHERNET port is properly connected.

The lights blink when the P-2302HWUDL-P1 is sending or receiving data through the corre-

sponding ETHERNET port.

•The WAN light stays on if a physical connection with your DSL modem exists and blinks when

transmitting data. The INTERNET light stays on when Internet access is available.

•The PHONE lights stay on when your SIP account is registered and they blink if the receiver is

off the hook.

•The WLAN light turns on when the wireless LAN is ready. It blinks when the P-2302HWUDL-P1

is sending/receiving data through the wireless LAN.

•The USB light turns on when there is a USB device (printer or memory stick) connected to the

P-2302HWUDL-P1.

If PHONE 1 or PHONE 2 light is on, skip to Section 5.2 to see how to make calls through the

Internet.

If the INTERNET light comes on but the PHONE lights are off, go to Section 5 and use the

VOIP SETUP wizard.

If the INTERNET light is off but the WAN light is on, go to Section 4 and use the CONNECTION WIZARD to

configure your Internet access settings.

If the lights are different than described, go to Troubleshooting.

3 DECT Phone Registration

In order to use your DECT phone with the P-2302HWUDL-P1, the DECT phone must register with the P-

2302HWUDL-P1’s DECT base station. Take the following steps to register your DECT phone with the P-

2302HWUDL-P1.

1 Press down the DECT base station button (A) on top of your P-2302HWUDL-P1 for 6 to 11 seconds. When

the LED light of the DECT base station button begins to blink , the P-2302HWUDL-P1 is in registration

mode. The P-2302HWUDL-P1 in registration mode for 25 to 30 seconds. Your DECT phone must be

registered within the time period.

P-2302HWUDL-P1 Quick Start Guide

Note: If you press the DECT base station button for 12 seconds or more, the DECT base station resets

and all previously registered DECT phones must be re-registered.

2 Put your DECT phone in registration mode. Refer to your DECT phone documentation.

When the P-2302HWUDL-P1 is in registration mode, the LED of the DECT base station button (A) blinks and

the P-2302HWUDL-P1 starts to scan its surrounding area for DECT phones in registration mode.

Note: To ensure clear communication between the two devices, make sure your DECT phone is within

range of the P-2302HWUDL-P1 during the registration process. See the User’s Guide for details.

3 When a P-2302HWUDL-P1 discovers a DECT phone in registration mode, it sends a request for a

Personal Identification Number (PIN). Your DECT phone receives the request and prompts you to enter the

PIN. Enter the PIN in the DECT phone by using the handset keypad. Entering a PIN ensures that only

authorized DECT phones connect to and use your P-2302HWUDL-P1 to make and receive calls.

Note: The default PIN of the P-2302HWUDL-P1 is 1234.

4 Repeat steps 1 - 3 to register additional phones.

Note: You can register up to 6 DECT phones with the P-2302HWUDL-P1.

Once your DECT phones are registered with the P-2302HWUDL-P1 you can assign SIP accounts to make

and receive VoIP calls. You can also use DECT phones to make internal calls, see your DECT phone

documentation for more information. Internal calls are calls between DECT phones registered with the P-

2302HWUDL-P1. For the P-2302HWUDL-P1 you can also assign your DECT phones to receive calls from the

PSTN line (regular phone line).

P-2302HWUDL-P1 Quick Start Guide

4 Initial Configuration

1 Open your browser and enter the P-2302HWUDL-

P1's IP address 192.168.1.1 (default) as the URL.

2 Enter the admin password 1234 (default). Click

If your browser cannot find this screen, make sure

your browser is configured correctly. See

Troubleshooting in the User’s Guide for details.

3 Follow the directions in this screen. 4 Click Go to Wizard setup.

P-2302HWUDL-P1 Quick Start Guide

4.1 Connection Wizard

The connection wizard helps you set up your Internet

connection as well as your wireless settings. Click

CONNECTION WIZARD.

Note: Enter the Internet access information exactly

as given to you by your ISP in each wizard

screen and then click Next to continue or click

Back to return to the previous screen.

Current screen information will be lost if you

click Back.

STEP 1: System Information

STEP 2: Wireless LAN

A Select None for your initial wireless security.

This screen is optional. You can just click Next.

• System Name is for identifying the P-

2302HWUDL-P1. You can enter your computer's

"Computer Name".

• If you leave the Domain Name blank, the domain

name obtained by DHCP from the ISP is used.

P-2302HWUDL-P1 Quick Start Guide

B Select No in the Do you want to enable OTIST ? radio button.

Note: These settings allow you to access the wireless network without setting up any security on your

wireless client. This means that any wireless device within range of your P-2302HWUDL-P1 can

access your wireless network.

If you know the security settings you want to set up you can also enter them in these screens. If

you want to set up OTIST, see the following section. Refer to your User’s Guide for more

information on setting up your wireless network.

OTIST

ZyXEL's One-Touch Intelligent Security Technology (OTIST) feature allows you to automatically configure the

SSID and WPA-PSK on all OTIST-equipped wireless clients within range of the P-2302HWUDL-P1.

Note: If you enable OTIST but select None in the Security field using the wireless wizard, the P-

2302HWUDL-P1 will create a WPA-PSK automatically.

If you enable OTIST and select Basic(WEP) in the Security field using the wireless wizard, the

P-2302HWUDL-P1 will replace the WEP key with a WPA-PSK.

Enable OTIST only if your wireless clients support WPA and OTIST.

You must enable OTIST on the P-2302HWUDL-P1 and all wireless clients within three minutes in any order.

To enable OTIST on wireless clients, click Start in the Adapter screen. The Setup Key is 01234567 by default.

If you have previously saved a setup key on the P-2302HWUDL-P1, use it instead of the default.

P-2302HWUDL-P1 Quick Start Guide

STEP 3: WAN

Select one connection type from the drop-down list box. Check with your ISP to make sure you use the correct

type:

1Ethernet

2 PPP over Ethernet

Note: If you were given Internet access settings, enter them in the following fields. Otherwise leave the

default settings and just click Next.

A Select Ethernet as your WAN connection type.

B Select Get automatically from your ISP if your ISP did not assign you a fixed IP address. Skip to C.

Select Use fixed IP address provided by your ISP to give the P-2302HWUDL-P1 a fixed, unique IP address.

Go to B1.

B1 If you select Use fixed IP address provided by your ISP, enter a WAN IP address, WAN IP Subnet Mask

and the neighboring device’s IP address given by your ISP.

If you were given DNS server settings, enter them in the fields. Otherwise leave the default settings and

just click Next.

C Select Factory Default to use the factory assigned default MAC address and click

Next. Then click Apply to

save your changes. The OTIST in Progress screen appears if you enable OTIST in the previous wizard

screen. Wait for the P-2302HWUDL-P1 to finish transferring OTIST settings.

D Click Finish to complete the wizard.

Ethernet Connection

P-2302HWUDL-P1 Quick Start Guide

A Select PPP over Ethernet as your WAN connection type.

B Type a Service Name (Optional), User Name and Password.

C Select Get automatically from your ISP if your ISP did not assign you a fixed IP address. Skip to D.

Select Use fixed IP address provided by your ISP to give the P-2302HWUDL-P1 a fixed, unique IP address.

Go to C1.

C1 If you select Use fixed IP address provided by your ISP, enter a WAN IP address, WAN IP Subnet Mask

and the neighboring device’s IP address given by your ISP.

If you were given DNS server settings, enter them in the fields. Otherwise leave the default settings and

just click Next.

D Select Factory Default to use the factory assigned default MAC address and click

Next. Then click Apply to

save your changes. The OTIST in Progress screen appears if you enable OTIST in the previous wizard

screen. Wait for the P-2302HWUDL-P1 to finish transferring OTIST settings.

When a congratulation screen appears, click Finish to complete the wizard.

PPP over Ethernet Connection

P-2302HWUDL-P1 Quick Start Guide

5 Configure VoIP

Click VOIP SETUP.

Note: You should have the information provided by

your VoIP service provider.

Enter the information provided by your VoIP service

provider. Keep the default settings if your VoIP service

provider did not provide some information. If you have a

SIP account like 1234567@VoIP-provider.com, the SIP

Number is 1234567, and the SIP Service Domain is VoIP-

provider.com. When you are done, the PHONE light

should be on. Close the wizard.

P-2302HWUDL-P1 Quick Start Guide

5.1 Regular Phone Line Setup

When one of your VoIP accounts is registered, the P-2302HWUDL-P1 normally uses the Internet (not the

regular phone line) to make phone calls. Follow the directions in this section to make sure you can also use

the regular phone line while one of your VoIP accounts is registered.

Note: When the P-2302HWUDL-P1 does not have power, only the phone connected to the PHONE 1

port can be used for making calls. Ensure you know which phone this is, so that in case of

emergency you can make outgoing calls.

In the main screen, click VoIP > PSTN Line.

PSTN Line Pre-fix Number: Enter 1 - 7 numbers you

dial before you dial the phone number, if you want to

make a regular phone call while one of your SIP

accounts is registered. These numbers tell the P-

2302HWUDL-P1 that you want to make a regular

phone call.

Relay to PSTN Line: Enter phone numbers for

regular phone calls (that do not use the Internet) that

you always want to dial without the prefix number. For

example, enter emergency phone numbers here.

Click Apply.

5.2 Make Phone Calls

Follow these directions to make calls over the Internet.

• If you want to dial a SIP number that only uses numbers (for example, “12345”), dial the number on your

phone’s keypad. You can also set up a speed-dial entry, if you want. See the User’s Guide for instructions.

• If you want to dial a SIP number that uses letters or if you want to make a peer-to-peer call, set up a speed-dial

entry first. See the User’s Guide for instructions. Then, dial the speed-dial number to make the call.

• If you want to call regular telephone numbers, use your VoIP service provider’s dialing plan.

Follow these directions to make phone calls that do not use the Internet.

• If you set up the phone number in the Relay to PSTN section (Section 5.1), just dial the phone number.

• If the PHONE light is off, just dial the phone number.

• Otherwise, first dial the prefix you set in Section 5.1, and then dial the phone number.

Follow these directions to call the phone that is connected to the P-2302HWUDL-P1.

• Use your VoIP service provider’s dialing plan, or just dial the phone number.

P-2302HWUDL-P1 Quick Start Guide

5.3 VoIP Trunking Overview

VoIP trunking connects an IP network (like the Internet) and the Public Switched Telephone Network (PSTN).

PSTN includes the world’s circuit-switched telephone network which is composed of fixed and mobile

telephones. VoIP trunking allows you to create VoIP links which PSTN (Public Switched Telephone Network)

callers can use to:

• Make phone calls via the Internet - Make a PSTN call to the P-2302HWUDL-P1 and it forwards the call to any

SIP based VoIP phone. In the example below, we call the P-2302HWUDL-P1 (B) from a regular phone (A), the

P-2302HWUDL-P1 then forwards the call to a VoIP phone (C).

• Save on long distance calls - The P-2302HWUDL-P1 creates a VoIP link which can be used to connect to a

PSTN phone in another country, province, region and so on. Below is an example of a VoIP trunking call. A

calls the P-2302HWUDL-P1 (B), B makes a VoIP connection to another VoIP trunking device C and C forwards

the call to a PSTN phone D.

See the User’s Guide for information on how to configure VoIP trunking.

6 USB File Sharing

This section shows you how to enable USB file sharing. In order to start file sharing you need to:

• Connect your USB 2.0 file sharing device. See Section 2.

• Enable the file sharing feature.

• Create an account (user name and password) for sharing the files.

• Browse to your files using the IP address of the P-2302HWUDL-P1.

P-2302HWUDL-P1 Quick Start Guide

6.1 Configure USB File Sharing

1 Click Management > File

Sharing.

2 Check the box Enable File

Sharing Services.

3 Select Active in the User

Configuration Setting

section and fill in the User

Name and Password

fields. Retype your

password and click Apply.

The P-2302HWUDL-P1

automatically recognizes the

USB device and makes it

available for sharing.

6.2 Browse to the USB File Share

1 In Windows Explorer’s Address bar

type a double backslash “\\”

followed by the IP address of the P-

2302HWUDL-P1 (192.168.1.1 is

the default) and hit [ENTER].

2 Enter the user name and password

when prompted and hit OK.

3 The files on the USB file sharing

device connected to the P-

2302HWUDL-P1 are now part of

your file structure and you can

manage those files just like any

other files on your computer.

Note: Refer to the User’s Guide for

a complete description of this

feature.

P-2302HWUDL-P1 Quick Start Guide

Troubleshooting

If you cannot access the P-2302HWUDL-P1, follow these steps.

1 Check the device’s lights. If they are different than what is described in Section 2, make sure the

connections are correct, and inspect your cables for damage. If the lights are still different, turn off the

device, wait a few seconds, and turn it on again.

2 Make sure your computer is on the same subnet as the P-2302HWUDL-P1. The P-2302HWUDL-P1 is set

up by default to assign an IP address to your computer. If you have a static IP address on your computer

change this setting to obtain an IP address automatically. See the User’s Guide for more details.

3 Make sure you typed the address correctly. If the address has changed you can press the RESET button

for ten seconds to restart the P-2302HWUDL-P1 and to restore factory defaults. The default IP address is

“192.168.1.1” and the default password is “1234”.

If you cannot access the Internet, follow these steps.

1 Check the device’s lights. If they are different than what is described in Section 2, make sure the

connections are correct, and inspect your cables for damage. If the lights are still different, turn off the

device, wait a few seconds, and turn it on again.

2 Follow the steps in section Section 4 again. Make sure you enter the correct information. For example, if

your account has a user name and password, make sure you type it correctly. In addition, if you are not

sure which encapsulation your ISP uses, contact your ISP.

3 If you are using a new Internet account, contact your ISP to make sure it is active.

4 If you still have problems, see Troubleshooting in the User’s Guide.

If you can access the Internet, but you cannot make calls through the Internet, follow these steps.

1 Check the PHONE lights. If neither of them is on, Make sure that your telephone is connected to the

corresponding PHONE port.

2 Make sure the VoIP wizard screens are properly configured (see Section 5).

3 You can also check the VoIP status in the Status screen. See the User’s Guide for more information about

this screen.

Viewing Your Product’s Certifications

1 Go to www.zyxel.com.

2 Select your product from the drop-down list box on the ZyXEL home page to go to that product's page.

3 Select the certification you wish to view from this page.

ZyXEL P-2302HWUDL-P1 User manual

Brand: ZyXEL

Model: P-2302HWUDL-P1

Category: Networking

Type: User manual

Download PDF

report

ZyXEL P-2302HWUDL-P1 User manual

ZyXEL P-2302HWUDL-P1 User manual

Related papers

Other documents