IBM T86A User manual

Category
PC/workstation barebones
Type
User manual
I
These user’s setup instructions cover typical user environments. The on-
screen messages may differ depending on the level of your hardware and
software. In some cases you may need to vary the setup procedures.
For more information, refer to your computer or operating system manuals or
consult your system administrator or dealer.
Ces instructions de configuration s’appliquent aux environnements
d’utilisation typiques. Les messages affichés à l’écran peuvent varier en
fonction de votre configuration matérielle et logicielle. Dans certains cas, il
peut être nécessaire de changer les procédures de configuration.
Pour de plus amples informations, veuillez consulter les manuels de votre
ordinateur et de votre système d’exploitation, ou consultez l’administrateur de
votre système ou votre revendeur.
Diese Anweisungen zur Installation durch den Benutzer gelten für typische
Betriebsumgebungen. Die Bildschirmmeldungen können je nach Art der
verwendeten Hardware und Software auch anders lauten. In einigen Fällen
müssen die Einstellungsschritte unter Umständen abgeändert werden.
Weitere Informationen finden Sie im Computer-order Betriebs-
systemhandbuch, oder wenden Sie sich an lhren System-administrator oder
Fachhändler.
Estas instrucciones sobre la configuración abarcan típicos entornos de
usuario. Los mensajes en pantalla pueden diferir según el nivel de su
hardware y software. En algunos casos, puede que sea necesario variar los
procedimientos de configuración.
Para mayor información, consulte los manuales de su ordenador o sistema
perativo, o consulte a su administrador de sistema o proveedor.
Queste istruzioni utente per il setup coprono ambienti utente tipici. I
messaggi su - schermo possono variare a seconda del livello del proprio
hardware e software. In alcuni casi puo’ essere necessario modificare le
procedure di setup.
Per maggiori informazioni, fare riferimento ai manuali del proprio computer o
del sistema operativo, oppure consultare il proprio amministratore di sistema
o il proprio rivenditore.
これらのユーザーズセットアップガイドでは、一般的なユーザー環境につ
いてサポートしています。画面上のメッセージは使用されているハードウ
ェアのレベルやソフトウェアの種類によって異なる場合がありますまた、
場合によっては、セットアップ手順の変更が必要な場合もあります。
詳細につきましては、現在使用中のコンピュータに付属のコンピューター
マニュアルかオペレーションマニュアルを参照するか、システム管理者か
II
販売元にお尋ね下さい
DANGER
To avoid shock hazard:
Do not remove the covers.
Do not operate this product unless the stand is attached.
Do not connect or disconnect this product during an electrical storm.
The power cord plug must be connected to a properly wired and grounded
power outlet.
Any equipment to which this product will be attached must also be connected
to properly wired and grounded power outlets.
To isolate the monitor from the electrical supply, you must remove the plug
from the power outlet. The power outlet should be easily accessible.
DANGER
Pour éviter les risques d’électrocution :
Ne retirez pas les capots du moniteur.
N’utilisez pas ce produit si le socle n’est pas fixé.
Ne connectez, ni ne déconnectez ce produit pendant un orage.
Le câble d’alimentation doit être connecà une prise électrique correctement
mise à la terre et en bon état de marche.
Tout équipement auquel ce produit est relié doit être également connecté à
une prise correctement mise à la terre et en bon état de marche.
Pour isoler le moniteur de la source d’alimentation électrique, vous devez le
débrancher de la prise électrique. Cette prise doit être facile d’accès
GEFAHRENHINWEIS
Um die Gefahr eines elektrischen Schlags zu vermeiden, folgendes
beachten:
Unter keinen Umständen die Abdeckungen abnehmen.
Das Produkt nicht in Betrieb nehmen, wenn der Sockel nicht montiert ist.
Das Gerät nicht während eines Gewitters an eine Steckdose anschließen
oder von ihr trennen.
Das Netzkabel ist an eine ordnungsgemäß verdrahtete und geerdete
Steckdose anzuschließen.
Jedes Gerät, mit dem dieses Produkt verbunden wird, muß ebenfalls an eine
ordnungsgemäß verdrahtete und geerdete Steckdose angeschlossen
werden.
Um den Monitor von der Stromversorgung zu trennen, muß der Stecker aus
der Steckdose gezogen werden. Die Steckdose sollte leicht zugänglich sein.
III
GEVAAR
Ga als volgt te werk om het gevaar van een elektrische schok te voorkomen:
Verwijder in geen enkel geval de kap.
Stel dit produkt alleen in werking als de voet is bevestigd.
Sluit dit apparaat niet aan op, of verbreek de aansluiting van dit apparaat niet
van een contactdoos tijdens onweer.
Het netsnoer moet worden aangesloten op een geaarde contactdoos met
correcte bedrading.
Ook alle apparatuur waarop dit produkt wordt aangesloten moet zijn
aangesloten op een contactdoos met correcte bedrading.
Om het beeldscherm te ontkoppelen van de netvoeding, dient u de stekker uit
de contactdoos te trekken. De contactdoos dient goed toegankelijk te zijn.
PELIGRO
Para evitar riesgos de descargas eléctricas:
No retire bajo ningún concepto las cubiertas.
No maneje el monitor sin antes acoplar el soporte.
No conecte ni desconecte el equipo de una toma de alimentación durante
una tormenta eléctrica.
El cable de alimentación debe estar conectado a un enchufe debidamente
cableado y con toma de tierra.
Cualquier equipo al que se vaya a conectar este producto también debe estar
conectado a tomas de alimentación cableadas y conectadas a tierra
correctamente.
Para aislar el monitor del suministro eléctrico, debe retirar el enchufe de la
toma de alimentación. Esta toma deberá ser de fácil acceso.
PERICOLO
Per evitare il rischio di scariche elettriche:
Non rimuovere nessuna parte del telaio.
Non accendere il prodotto se il piedistallo non è stato montato.
Non collegare o scollegare il prodotto nel corso di un temporale.
La spina del cavo di alimentazione deve essere collegata ad una presa di
corrente con messa a terra, installata in maniera appropriata.
Le apparecchiature a cui il prodotto viene attaccato devono essere collegate
a prese di corrente con messa a terra, installate in maniera appropriata.
Per isolare il monitor dalla corrente elettrica, staccare la spina dalla presa di
alimentazione, che deve essere facilmente accessibile.
PERIGO
Para evitar o perigo de choques eléctricos:
Não retire as coberturas.
IV
Não utilize este produto antes de montar a base.
Não ligue nem desligue este produto durante uma tempestade eléctrica.
O cabo de alimentação deve ser ligado a uma tomada eléctrica devidamente
ligada à terra.
Qualquer equipamento ligado a este produto deve estar ligado a tomadas
eléctricas devidamente ligadas à terra.
Para isolar o monitor da fonte de alimentação, retire a ficha do cabo de
alimentação da tomada eléctrica. A tomada eléctrica deve ser de fácil acesso.
FARE
Sådan undgår du elektrisk stød:
Kabinettet må under ingen omstændigheder fjernes.
Undgå at anvende dette produkt, uden at vippe/drejefoden er monteret.
Undgå at tilslutte eller frakoble dette produkt i tordenvejr.
Netledningen skal være tilsluttet en korrekt jordet stikkontakt med korrekt
ledningsføring.
Alt udstyr, som tilsluttes dette produkt, skal også være tilsluttet korrekt
jordede stikkontakter med korrekt ledningsføring.
For at isolere skærmen fra strømforsyningen, skal stikket tages ud af
stikkontakten. Stikkontakten bør være let tilgængelig.
FARE
Slik unngår du fare for elektrisk støt:
Ikke ta av dekslene.
Ikke bruk produktet dersom sokkelen ikke er montert.
Ikke koble produktet til eller fra under tordenvær.
Pluggen på strømledningen må kobles til korrekt montert og jordet
strømuttak.
Utstyr som dette produktet eventuelt blir koblet til, må også kobles til korrekt
montert og jordet strømuttak.
For å isolere skjermen fra strømkilden må du ta ut pluggen fra strømuttaket.
Strømuttaket bør være lett tilgjengelig.
Varning - livsfara
För att undvika risk för elektriska stötar måste du tänka på följande:
Ta inte bort några skyddskåpor.
Använd inte den här produkten innan du har satt fast stativet.
Anslut inte produkten till ett eluttag under åskväder. Koppla inte heller ur
produkten från ett eluttag under åskväder.
Strömkabeln måste anslutas till ett felfritt och jordat uttag.
All utrustning som den här produkten kopplas till måste också anslutas till
felfria och jordade uttag.
V
För att bryta strömmen till bildskärmen måste du dra ut kontakten.
Vägguttaget bör vara lätt att komma åt.
VAARA
Sähköiskun vaaran välttämiseksi:
Älä avaa laitteen kansia missään tilanteessa.
Älä käytä laitetta, ellei jalustaa ole kiinnitetty.
Älä kytke laitetta pistorasiaan tai irrota sitä pistorasiasta ukonilman aikana.
Virtajohto on kytkettävä asianmukaisesti johdotettuun ja maadoitettuun
pistorasiaan.
Kaikki muutkin laitteet, joihin tämä tuote on liitetty, on kytkettä
asianmukaisesti johdotettuihin pistorasioihin.
Kun haluat erottaa näyttimen sähköverkosta, sinun pitää irrottaa sen
verkkojohto pistorasiasta. Pistorasian pitäisi olla mahdollisimman lähellä
näytintä ja vaivattomasti käsillä.
ΚΙΝΔΥΝΟΣ
Για να αποφύγετε τον κίνδυνο από χτυπήματα:
Μην αφαιρείτε τα καλύμματα.
Μη θέτετε το προϊόν αυτό σε λειτουργία εκτός εάν είναι τοποθετημένο στη
βάση του.
Μη συνδέετε ή αποσυνδέετε το προϊόν αυτό κατά τη διάρκεια ηλεκτρικής
καταιγίδας.
Ο ηλεκτροδέκτης του καλωδίου πρέπει να συνδέεται σε κανονικά
καλωδιωμένο και γειωμένο ηλεκτροδότη.
Οποιαδήποτε συσκευή με την οποία θα συνδεθεί το προϊόν αυτό πρέπει
επίσης να συνδέεται σε κανονικά καλωδιωμένους και γειωμένους
ηλεκτροδότες.
Για να μονώσετε τον ενδείκτη από την ηλεκτρική παροχή, πρέπει να
αφαιρέσετε τον ηλεκτροδέκτη από την έξοδο ηλεκτρικού ρεύματος. Η έξοδος
ηλεκτρικού ρεύματος πρέπει να είναι εύκολα προσβάσιμη.
Tehlike !
Þok tehlikesini önlemekin :
Kapaklarýn yerini deðiþtirmeyin.
Eðer destek baðlý deðilse, bu üretimi çalýþtýrmayýn.
Elektrik cereyaný açýk olduðu zaman bu üretimi baðlamayýn veya kesmeyin.
Kablo fiþi elektrik þebekesi ile çok iyi baðlanmýþ olmalýdýr ve tam tesisat
borusuna baðlanmalýdýr.
Hangi tesisat veya hangi üretim olursa olsun, tam elektrik þebekesine iyi bir
þekilde baðlanmalýdýr ve tam tesisat borusuna takýlmalýdýr.
VI
Elektrik cereyaný ekranýný tam izole etmek için, kablo fiþini elektrik
borusundan çýkarýnýz. Elektrik borusu giriþe kolaylýkla açýk olmalýdýr.
危険
危険危険
危険
安全にお使いいただくためには、以下について実行してください。
カバーを外さないこと
スタンドを装着していない時は、本体を作動させないこと。
落雷の最中に本体を接続したり切断したりしないこと。
電気コードプラグを正確に接地されたプラグの差込口に挿入すること。
又、本体付属の部品についても、きちんと接地されたプラグの差込口に挿
入すること。
電源からモニタを絶縁させたい場合には、プラグをコンセント差込口から
抜いてください。
IBM T86A
LCD Color Monitor
User’s Manual
ii
First Edition (January 2000)
This publication could contain technical inaccuracies or typographical errors.
Known inaccuracies and errors may be corrected in later editions. IBM may
make improvements and/or changes in the product(s) and/or program(s) at
any time.
It is possible that this publication may contain reference to, or information
about, IBM products (machines and programs), programming, or services
that are not announced in your county.
Requests for copies of this publication and for technical information about
IBM products should be made to your IBM Authorized Dealer or IBM Retailer.
No part of this publication may be reproduced or distributed in any form or by
any means without prior permission in writing from the International Business
Machines Corporation.
© Copyright International Business Machines Corporation, 2000. All
RIGHTS RESERVED.
iii
Notices:
References in this publication to IBM products, programs, or services do not
imply that IBM intends to make these available in countries in which IBM
operates. Any reference to an IBM product, program or service is not intended
to state or imply that only IBM’s product, program, or service may be used.
Any functionally equivalent product, program, or service that does not infringe
IBM‘s intellectual property rights or other legally protectable rights may be
used instead of the IBM product, program, or service. Evaluation and
verification of operation in conjunction with other products, programs, or
services, except those expressly designated by IBM, are the user’s
responsibility.
IBM may have patents or pending patent applications covering subject matter
in this document. The furnishing of this document does not give you any
license to these patents.
Trademarks
The following terms, used in this publication, are trademarks or service marks
of the IBM Corporation in the United States or other countries:
IBM
IBM HelpCenter
iv
TABLE OF CONTENTS
Setup...............................................................................................................1
Unpacking........................................................................................................1
Hardware Requirements .................................................................................1
Workplace Preparation....................................................................................1
Working Practices............................................................................................2
Adjusting the Monitor Position.........................................................................3
Removing the Locking Pin and Lifting the Monitor..........................................4
Removing the Stand from the monitor.............................................................5
Add Another Signal Cable ...............................................................................7
Caring for your Monitor....................................................................................8
Maintenance ....................................................................................................9
Installing the Monitor ..................................................................................10
Installing the Monitor .....................................................................................10
Configuring Your Monitor...........................................................................12
Automatic Setup ............................................................................................12
SETUP Diskette for Windows 95 or Windows 98 or Windows 2000.............12
Auto Setup for Windows 3.1, Windows 95, Windows 98 or Windows 2000 or
Windows NT ..................................................................................................13
Adjusting the Monitor .................................................................................15
User Controls.................................................................................................15
CONTROLS LOCK / UNLOCK......................................................................16
On-screen display (OSD) controls.................................................................17
Further Information .....................................................................................22
Supported Timing Modes ..............................................................................22
Power Management ......................................................................................24
Product Disposal ...........................................................................................24
Troubleshooting ..........................................................................................25
Specification ................................................................................................27
Warranty Statements ..................................................................................28
Compliance ..................................................................................................43
Statement ......................................................................................................43
Power Cord....................................................................................................44
v
Industry Canada Compliance Statement ......................................................44
Déclaration de Conformité Industrielle du Canada .......................................44
TCO’95 applies to 9497-AG1
......................................................................45
TCO’99 applies to 9497-AW1
......................................................................45
Hinweise ........................................................................................................47
1
Setup
Unpacking
Check following items. If they are missing or damaged, consult your place of
purchase immediately.
9
LCD monitor
9
DVI-Analogue signal cable
9
Power Adapter
9
Power Cord
9
User Guide
9
Installation Diskette
Hardware Requirements
This monitor requires a computer with a suitable on-board sub-system or
Video Adapter card that can support SXGA 1280x1024, XGA 1024x768,
SVGA 800x600, or VGA 640x480 at 60Hz.
Note: Recommended operating mode is 1280 x 1024 @ 60 Hz.
Workplace Preparation
9
Height
The monitor should be positioned so that the top of the screen is slightly
below your eye level when sitting at your workstation.
9
Orientation
¾
Choose a position that gives the least reflection from lights and windows,
usually at a right angle to any windows.
1
2
¾
The monitor should be positioned directly in front of you so that you do
not have to twist your body to use it.
¾
Tilt the monitor to a comfortable viewing angle.
Working Practices
9
Rest
Take regular breaks. Vary your posture, stand up and stretch occasionally, as
prolonged use of computer workstations can be tiring.
9
Back
You should sit back in your chair and use the backrest.
9
Hands
Use a light touch on the keyboard, keeping your hands and fingers relaxed.
Allow a space in front of the keyboard to rest your wrists when not typing.
Consider using a wrist pad.
9
Eyesight
Working with monitors, in common with any prolonged close work, can be
visually demanding. Look away from the screen periodically and have your
eyesight checked regularly.
9
Screen settings
Set the screen brightness and contrast to a comfortable level. You may have
to adjust this as the lighting changes during the day. Many application
programs let you select color combinations, which can help you to view in
comfort. See the
Adjusting the Monitor
section for more information.
3
Adjusting the Monitor Position
9
Rotation
The monitor can be put in portrait or landscape mode as shown below.
Note: The rotate mechanism will not operate when the monitor is in the lowest
position.
Step 1Step 2Step 3
You can tilt the screen backward and forward –tilt 1-29 degrees as shown
below.
You can adjust the screen height by a maximum of 130mm.
4
You can swivel the base around – swivel 300 degrees..
Removing the Locking Pin and Lifting the Monitor
The monitor has a locking pin to stop the screen from moving in transit. Before
the height adjustment can be used, you must remove the locking pin from the
stand.
1. With the rear of the monitor facing you, locate the locking pin as show in
diagram
2. Turn the locking pin a quarter of a turn and remove
5
3. The monitor height can now be adjusted
Removing the Stand from the monitor
1. Lay the monitor face down on a flat surface
(NOTE: It is important to place a soft cloth or other protective material
beneath the monitor to avoid scratching the screen.)
6
2. Push up the cable cover and remove it
3. Remove the four mounting screws on the monitor.
Caution: The stand is heavy and care should be taken to avoid dropping it.
4. Separate the cables from the Stand
7
5. Remove the stand from the monitor
Add Another Signal Cable
1.
Remove the stand from the monitor as shown above.
2.
Remove the plate.
3.
Attach the other cable.
4.
Attach the plate.
8
5.
Insert the power cable and signal cables into the hole of the stand.
6.
Attach the 4 screws.
7. Push down the cable cover and fasten it.
Caring for your Monitor
Be sure to turn off the power before you perform any maintenance on the
monitor. Clean your monitor as follows:
z
Gently wipe the covers and the screen with a soft cloth.
z
Remove finger marks and grease with a damp cloth and mild detergent;
do not use solvents or abrasives.
z
Never apply detergent or other liquid directly to the screen. Dampen the
cloth and then wipe.
z
Never use flammable cleaning material to clean your IBM monitor or any
other electrical apparatus.
9
Maintenance


Do not expose the monitor to direct sunlight or heat.

Do not spill liquid on the monitor.

Do not attempt to open the monitor. For service, see the
Troubleshooting section.

Do not place anything on your monitor. Poor ventilation will elevate
the temperature in the monitor.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61

IBM T86A User manual

Category
PC/workstation barebones
Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI