Leadleds LED Nametag Operating instructions

Brand
Leadleds
Model
LED Nametag
Type
Operating instructions
Leadleds LED Nametag Instructions
1.Specifications Parameter
Size:92×28×6.5mm
Communication Interface: USB MICRO(Sameas Android)
Free Drive
Battery Level: lithium battery 230mah,charging 1.5hours,
Run 12 hours
Operating System:Windows32 or 64
Charging AC:5V,500MA(with conventional mobile phone
charger)
Interface Language: Chinese, English, Turkish, Persian,
Russian, French, German, Thai, Mongolian, Persian, Korean,
Japanese,Spanish, Vietnamese
Screen: you can build multiple screens, send different content
to different badges.
Programs: 10 programs, 4000 English(32K Byte),support
temperature
Brightness adjustment: 3 levers(20%,60%,100%),press
button long to adjust brightness
Software: HDSmart (connect the USB cable, displayed in the
computer disk )
2.The button functions:
Switch is on the left, in the above state for the shut down, in
the following for the power.
The back of the button to adjust the brightness and switching
programs, press long to adjust brightness, when you release
the button to save the brightness value, when you set “Button
to switch”, this button is to switch the next program.
3.Charging
PC direct charge and using a 5V charging supply charge.
4.Software installation
Open the removable disk, unzip the files on the disk, double-
click the icon to install the soft ware.
5.Editing program
a. New screen
The software can be built multiple screens, you can set the size
of each screen separately.
b. New program
System settings can set the current program playback mode.
temperature correction, the correction range of 7 degrees.
Animation settings can add more of your favorite motion
picture, motion picture only support GIF format. If the
animation does not show it, please update the animation.
Picture settings can be added to display images, support .jpg/
.bmp/.png formats
There are pictures editor toolbar, free to draw your needs.
6.Simple appearance figure
4.Pin 5.Magnet
1.Switch
2.USB
3.The back of the brightness adjustment switching button
If you have any problems about leadleds products, please
contact us jingzhi5685@leadleds.com
Leadleds LED Nametag Instructions
1.Specifications Parameter
Size:92×28×6.5mm
Communication Interface: USB MICRO(Sameas Android)
Free Drive
Battery Level: lithium battery 230mah,charging 1.5hours,
Run 12 hours
Operating System:Windows32 or 64
Charging AC:5V,500MA(with conventional mobile phone
charger)
Interface Language: Chinese, English, Turkish, Persian,
Russian, French, German, Thai, Mongolian, Persian, Korean,
Japanese,Spanish, Vietnamese
Screen: you can build multiple screens, send different content
to different badges.
Programs: 10 programs, 4000 English(32K Byte),support
temperature
Brightness adjustment: 3 levers(20%,60%,100%),press
button long to adjust brightness
Software: HDSmart (connect the USB cable, displayed in the
computer disk )
2.The button functions:
Switch is on the left, in the above state for the shut down, in
the following for the power.
The back of the button to adjust the brightness and switching
programs, press long to adjust brightness, when you release
the button to save the brightness value, when you set “Button
to switch”, this button is to switch the next program.
3.Charging
PC direct charge and using a 5V charging supply charge.
4.Software installation
Open the removable disk, unzip the files on the disk, double-
click the icon to install the soft ware.
5.Editing program
a. New screen
The software can be built multiple screens, you can set the size
of each screen separately.
b. New program
System settings can set the current program playback mode.
temperature correction, the correction range of 7 degrees.
Animation settings can add more of your favorite motion
picture, motion picture only support GIF format. If the
animation does not show it, please update the animation.
Picture settings can be added to display images, support .jpg/
.bmp/.png formats
There are pictures editor toolbar, free to draw your needs.
6.Simple appearance figure
4.Pin 5.Magnet
1.Switch
2.USB
3.The back of the brightness adjustment switching button
If you have any problems about leadleds products, please
contact us jingzhi5685@leadleds.com
Operation Steps
1.Connect the product to your computer via the Micro-USB
cable.
2.Open the Removable Disk, Unzip the(extract the HDSmart)
file and install the software to your computer.
3.Start the HDSmart program and choose “File””New””Screen”
to create a new “screen”.
4.Choose “44*11"as the valid screen size and click “OK”.
5.Type the text and set the Effect, Boarder, Move Speed,
Residence Time, Font, Size, etc, as your preference.
6.After finish all the settings, click “Send” to save changes to
the product.
7.Disconnect the product and slide the switch, you are ready
to go.
  • Page 1 1
  • Page 2 2

Leadleds LED Nametag Operating instructions

Brand
Leadleds
Model
LED Nametag
Type
Operating instructions
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Other documents