AutoPatch Modula Cat Pro Configuration manual

Type
Configuration manual
Up to 16 local RGBHV + stereo
sources or 32 video only sources
In this scenario the Modula CatPro transmits
local inputs out over CAT-5 to destination
devices up to 1,000 feet away
In this scenario the Modula CatPro acts as anA/V hub
between multiple rooms to receive, route, and transmit
signals from any source to any destination
CatPro RX
CAT-5 RECIEVER
A Div. of XN Technologies, Inc. Cheney, WA USA, 509-235-2636
RGBHV TO CAT-5
CatPro TX
CAT-5 RECIEVER
A Div. of XN Technologies, Inc. Cheney, WA USA, 509-235-2636
RGBHV TO CAT-5
Total CAT-5 signal paths up to 1,000 ft.
RGBHV
Stereo
CAT-
5
RGBHV
Stere
o
CAT-
5
CatPro RX
CatPro TX
Total CAT-5 signal paths up to 1,000 ft.
CatPro RX
CAT-5 RECIEVER
A Div. of XN Technologies, Inc. Cheney, WA USA, 509-235-2636
RGBHV TO CAT-5
CatPro RX
CAT-5 RECIEVER
A Div. of XN Technologies, Inc. Cheney, WA USA, 509-235-2636
RGBHV TO CAT-5
Up to 32 zones
Up to 32 zones
Up to 32 zones
CAT-5 RECIEVER
A Div. of XN Technologies, Inc. Cheney, WA USA, 509-235-2636
RGBHV TO CAT-5
CAT-5 RECIEVER
A Div. of XN Technologies, Inc. Cheney, WA USA, 509-235-2636
RGBHV TO CAT-5
MODULA
There are dozens of possible configurations here are just two examples to get you started.
Contact AutoPatch today at 800.622.0246 or visit www.autopatch.com
for more information on the new Modula CatPro and our full line of
professional signal management solutions.
Intuitive gain, peak, and skew adjustments via the CatPro Software Wizard
Resolutions up to 1600x1200 @ 60 Hz and 1920x1080 @ 60 Hz
Compatible with UTP and STP category cable (5, 5e, 6, 6e …)
CAT-5 signal paths up to 1,000 feet
Receive, route, and transmit uncompressed RGBHV + stereo over category
cable without worrying about exact measurements or re-adjusting gain, peak,
and skew when routing signal paths of various lengths.
For even more flexibility, combine CAT-5, HD-15, and stereo audio boards in
the same systemand route between them with ease.
Configuration Guide
Web: www.autopatch.com | Phone: 800.622.0246509.235.2636 • Europe: +44 (0) 1347 812310 | E-mail: sales@autopatch.com Europe: info@autopatch.com
The Modula CatPro is customizable; simply choose from the available input and output boards to
build the sy
stem in increments of four inputs and/or outputs. Each Modula CatPro enclosure can
hold up to eight input boards and eight output boards.
Modula
Simple gain, peak,
and skew adjustments
RGBHV and stereo sources transmitted over
CA
T-5 at the source can be routed into the
Modula over RJ-45 input connections. Each
board has 4 input connections. In this case,
both the RGBHV and stereo signals are
combined over a single CA
T-5 cable thus
one 4 connection input board will receive 4
RGBHV + stereo signals.
RGBHV sources can also be connected
directly to the Modula via HD-15
connections. Each board has 4 in
put
connections. Stereo sources can be
connected directly into the Modula via
phoenix style connections (5T). Each
board has 4 in
put connections.
RGBHV and stereo sources can then be transmitted out of the Modula over
CAT-5 via RJ-45 output connections as well as routed out over HD-15 and
phoenix st
yle connectors at the same time. This ultimate flexibility allows for
any source to be sent to any destination. For maximum video performance, we
recommend each signal path does not exceed 1,000 feet.
Configuration Guide
04561901015OPTM090004
50-60Hz 6.3A Max.
100-240VAC
UL 60950
E177015
Cheney, WA USA, 509-235-2636
A Div. of XN Technologies, Inc.
MODULA 4RU
1
IN
3
4
2
5
7
8
6
IN
PORT 2
LINK
2
PORT
1LINK 1
OUT
1
OUT
3
4
2
5
OUT
7
8
6
STATUS
COMM
IN
8
7
5
6
8
7
5
6
L
R
L
R
L
R
L
R
CATPRO CATPRO
Once your system is set up, there is no need to readjust when switching between
sources and devices that have different distance runs. Our user-intuitive CatPro
Software Wizard allows for simple adjustment of gain, peak, and skew on every
CAT-5 input received. This brings all signals back to a distance of zero ready to
be sent to any destination device without the hassle of readjustment. If the
signals are then retransmitted out CAT-5 a CatPro Receiver Module located at the
destination device adjusts for the cable length between the router and RX module.
CAT-5 RECIEVER
A Div. of XN Technologies, Inc. Cheney, WA USA, 509-235-2636
RGBHV TO CAT-5
RGBHV
St
ereo
CAT-
5
RGBHV and stereo sources can be
connected directly to the Modula
over HD-15 and phoenix style
connectors.
RGBHV + stereo sourc
e
RGBHV + stereo source
CatPro TX
Modula CatPro
CatPro RX
Monitor
Monitor
RGBHV and stereo sources can be
transmitted over CAT-5 with the
CatPro TX and then into the Modula
over RJ-45 connections.
Then, any input can be routed out
over CA
T-5 (RJ-45), or HD-15 /
phoenix connections, or both.
04561901015OPTM090004
50-60Hz 6.3A Max.
100-240VAC
UL 60950
E177015
Cheney, WA USA, 509-235-2636
A Div. of XN Technologies, Inc
.
MODULA 4RU
1
IN
3
4
2
5
7
8
6
IN
PORT 2
LINK 2
PORT 1LINK 1
OUT
1
OUT
3
4
2
5
OUT
7
8
6
STATUS
COMM
IN
8
7
5
6
8
7
5
6
L
R
L
R
L
R
L
R
CATPRO CATPRO
CAT-5 RECIEVER
A Div. of XN Technologies, Inc. Cheney, WA USA, 509-235-2636
RGBHV TO CAT-5
2416 Cheney-Spokane Rd.
P.O. Box 350 Cheney, WA 99004-0350
phone: 800.622.0246 US & Canada
fax: 509.235.2646
web: www.autopatch.com
Unit 3 Green Park Business Centre
Goose Lane
Sutton-on-the-Forest
York
Y061 1ET
phone: +44 (0) 1347 812310
fax: +44 (0) 1347 812322
  • Page 1 1
  • Page 2 2

AutoPatch Modula Cat Pro Configuration manual

Type
Configuration manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI