Konica Minolta EP1085 Owner's manual

Brand: Konica Minolta

Model: EP1085

Category: Copiers

Type: Owner's manual

EP1085

Using the Copier Properly.............................................................. X-1

What is an Energy Star Copier ?.................................................... X-3

EP1085.......................................................................................... X-4

CE Marking (Declaration of Conformity) ........................................X-4

Terms and Symbols for the Type of Originals and Copy Paper..... X-5

Feeding Direction (copy paper path).............................................. X-5

“Width” and “Length”...................................................................... X-5

Terms and Symbols Used..............................................................X-6

1 Safety Notes

1.1 Installing the Copier......................................................................1-1

Installation Site................................................................................1-1

Power Source..................................................................................1-1

Grounding.......................................................................................1-2

Space Requirements.......................................................................1-3

1.2 Precautions for Use......................................................................1-4

Operating Environment...................................................................1-4

Using the Copier Properly...............................................................1-4

Care of Copier Supplies..................................................................1-5

Moving.............................................................................................1-5

Legal Restrictions on Copying........................................................1-6

Financial Instruments......................................................................1-6

Legal Documents............................................................................1-6

General ...........................................................................................1-6

2 Getting to Know Your Copier

2.1 System Overview ..........................................................................2-1

Automatic Document Feeder AF-5 <Option>..................................2-1

10-Bin Sorter S-106 <Option>.........................................................2-1

Multi Bypass Tray MB-4 <Option>..................................................2-1

EP1085...........................................................................................2-1

2.2 Copier Parts and Accessories.....................................................2-2

Outside Copier................................................................................2-2

Inside Copier...................................................................................2-3

Automatic Document Feeder AF-5..................................................2-5

10-Bin Sorter S-106 ........................................................................2-6

Multi Bypass Tray MB-4..................................................................2-6

Table of Contents

EP1085

2.3 Control Panel Keys and Indicators............................................. 2-7

Control Panel..................................................................................2-7

Display............................................................................................2-9

Monitor Display...............................................................................2-9

Paper Information Display............................................................2-10

Zoom Ratio Indicator / Multi-Copy Display...................................2-10

Exposure Information Display.......................................................2-11

2.4 Turning ON and OFF, and Resetting the Copier......................2-12

Turning ON and OFF....................................................................2-12

When the Copier is Turned ON....................................................2-12

Auto Copy Start Function

(Only when Automatic Document Feeder is used).......................2-13

Using the Function........................................................................2-13

Minimizing the Warm-up Time......................................................2-14

Initial Mode and Panel Resetting..................................................2-15

Auto Reset Function.....................................................................2-16

3 Making Copies

3.1 Copying Overview........................................................................3-1

3.2 Copying Procedure ......................................................................3-4

Placing Originals.............................................................................3-4

Sheet Originals (Standard Size).....................................................3-4

Highly Transparent Originals..........................................................3-4

Book Original..................................................................................3-5

Using the Automatic Document Feeder..........................................3-6

Loading Standard Size Originals.................................................... 3-7

For Originals Not Suitable for Reliable Operation of the Automatic

Document Feeder...........................................................................3-8

Single Automatic Document Feeding Mode (SADF Mode)............3-9

Checking the Copy Paper Size and Selecting the Paper Source.3-10

Selecting the Paper Source

(Only when the Multi Bypass Tray is used)..................................3-10

3.3 Zoom Ratio.................................................................................. 3-11

Fixed Zoom Ratios .......................................................................3-11

Zoom Ratios.................................................................................3-11

Selecting the Fixed Zoom Ratios..................................................3-12

Setting a Zoom Ratio....................................................................3-13

Auto Size Mode............................................................................3-14

Selecting the Auto Size Mode ......................................................3-14

3.4 Image Density .............................................................................3-15

Types of Exposure Modes............................................................3-15

Selecting the Auto Exposure Mode..............................................3-16

Selecting the Manual Exposure Mode..........................................3-16

EP1085

Selecting the Photo Mode.............................................................3-16

3.5 Book Copying..............................................................................3-17

Selecting the Book Copying Mode................................................3-17

3.6 Finishing Mode............................................................................3-19

Types of Finishing Modes.............................................................3-19

Selecting the Finishing Mode........................................................3-20

Auto Dual Function........................................................................3-21

Auto Dual Function in the Sort Mode............................................3-21

3.7 Manual Bypass Copying.............................................................3-22

Using the Manual Bypass Tray.....................................................3-23

Using the Multi Bypass Tray (Option) ...........................................3-23

4 Auxiliary Functions

4.1 Checking the Total Number of Copies Mode..............................4-1

Types of Counters...........................................................................4-1

Counter Display...............................................................................4-1

Using the Meter Count Function .....................................................4-2

4.2 Toner Replenisher Function

(Increasing the Image Density)4-3

4.3 Drum Dehumidifier Function........................................................4-4

4.4 User’s Choice................................................................................4-6

Functions Available in User’s Choice..............................................4-6

Description of Each User’s Choice Function...................................4-6

Making the User’s Choice Mode Settings.....................................4-12

5 When an Indicator Lights Up

5.1 Quick Reference for Indicator Lights..........................................5-1

Warning Indicators..........................................................................5-1

5.2 Detailed Instructions for Indicator Lights...................................5-2

Add Toner Indicator.........................................................................5-2

Replacing the Toner Bottle..............................................................5-2

Add Paper Indicator ........................................................................5-4

Adding Paper (Drawer) ...................................................................5-4

Adding Paper (Multi Bypass Tray)..................................................5-5

Closure Failure Indicator.................................................................5-6

Misfeed Indicator.............................................................................5-7

Misfeed Indicator and Monitor Display............................................5-7

Misfeed Clearing Procedure............................................................5-8

Automatic Document Feeder........................................................5-12

Sorter ............................................................................................5-14

Call-Tech.-Rep. Indicator..............................................................5-15

EP1085

Resetting the Call-Tech.-Rep. Indicator .......................................5-15

I.U. Service Life Indicator Lights Up.............................................5-16

Precautions for Handling..............................................................5-17

Removing the I. U. from the copier...............................................5-18

Unpacking the I. U........................................................................5-19

Setting up the I. U.........................................................................5-19

Charging the Copier with Starter and Toner.................................5-21

6 Troubleshooting

6.1 When this Type of Copy is Produced.........................................6-1

6.2 The Copier is not functioning as designed................................6-3

7 Specifications

Copier EP1085...............................................................................7-1

Automatic Document Feeder AF-5.................................................7-2

10 Bin Sorter S-106........................................................................7-3

Multi Bypass Tray MB-4 .................................................................7-3

8 Miscellaneous

8.1 Care of the Copier ........................................................................8-1

Daily Checks...................................................................................8-1

Power Cord, Communications Cable, Ground Cable.....................8-1

Original Glass.................................................................................8-1

Original Cover, Automatic Document Feeder.................................8-1

Copy Paper..................................................................................... 8-2

Sound of Copier Operation.............................................................8-2

Copier Housing Temperature.........................................................8-2

Cleaning .........................................................................................8-2

Housing ..........................................................................................8-2

Original Pad....................................................................................8-2

Original Glass.................................................................................8-3

Control Panel..................................................................................8-3

Front Door ......................................................................................8-3

Corona Units...................................................................................8-4

Document Transport Belt................................................................8-5

8.2 Paper Size and Zoom Ratio Table...............................................8-6

Paper Size......................................................................................8-6

Zoom Ratio Table (Original Size to Copy Paper Size)...................8-7

EP1085 X-1

Using the Copier Properly

To ensure the optimum performance of the copier, follow the precautions

listed below.

 Never place a heavy object on the copier.

 Never subject the copier to shocks.

 Never open doors or turn the copier off while he is making copies.

 Never bring any magnetized object near the copier.

 Never use flammable sprays, liquids or gases near the copier.

 Never modify the copier, as a fire or electrical shock could result.

 Never remove any panel or cover which is secured. The copier

contains high voltage components which can cause electrical shock.

 Never tamper with the laser mechanism in laser-equipped models, as

blindness or other injury may result.

 Never drop paper clips, staples or other small pieces of metal through

the vents or other openings in the copier, as a fire or electrical shock

can result.

 Never place containers of liquid on the copier. If liquids get inside the

copier,theycan causefireor electricalshock.Ifapieceof metalor any

liquidgetsinsidethecopier,immediatelyturnthecopieroff, unplugthe

power cord and call your technical representative. A fire or electrical

shock can result if the copier remains plugged in or is operated after

metal or liquid gets inside.

 Never leavethe copierrunning if itbecomes unusually hot,or ifsmoke

or an unusual odor or noise is detected. Should any of these

conditions occur, immediately turn the copier off, unplug the power

cord and call your technical representative. A fire or electrical shock

can result if the copier remains plugged in under any of these

conditions.

 Always insert the power plug all the way into the outlet.

 Always make sure that the outlet is visible, clearofthe copier or copier

cabinet.

 Always provide good ventilation when making a large number of

continuous copies.

 Never pull on the power cord, and always hold the plug when

unplugging the power cord. A damaged cord could result in a fire or

cause an electrical shock.

 Never unplug the power cord with a wet hand, as it could cause an

electrical shock.

 Always unplug the power cord before moving the copier. Moving the

copier with the power cord plugged in can damage the cord resulting

in a fire or causing an electrical shock.

X-2 EP1085

 Always unplug the powercord when thecopierisnot going to beused

for a long time.

 Never place a heavy object on the power cord, or pull or bend it, as a

fire or electrical shock can result.

 Always ensure that the copier does not sit on or move onto the power

cord or communications cable of other electrical equipment, as

malfunctioning equipment or a fire could result.

 Always ensure that the power cord or communications cable of other

electrical equipment does not become wedged into the copier

mechanism, as malfunctioning equipment or a fire could result.

 Always use the correct power voltage, asimproper voltage can cause

a fire or electrical shock.

 Never use a multiple outlet adapter, as a fire or electrical shock can

result.

 Shouldthe powercordbecome damaged, immediatelyturn the copier

off, unplug the power cord and call your technical representative. A

damaged cord can result in a fire or cause an electric shock.

 If an extension cord is needed, use one with a greater rated capacity

than the maximum power requirements of the copier. The use of an

extension cord that falls short of supporting the maximum power

requirements can result in overheating or a fire

 Always unplug the copier whenever anything unusual is observed

during operation. Make sure that the outlet is nearby and clear of the

copier and furniture.

NOTE

Locate the Copier in a Well Ventilated Room

è A negligible amount of ozone is generated during normal operation of

this copier. An unpleasant odor may, however, be created in poorly

ventilated rooms during extensive copier operations. For a

comfortable, healthy and safe operating environment, it is

recommended that the room be well ventilated.

Placer le copieur dans une pièce largement ventilée

è Une quantité d’ozone négligeble est dégagée pendant le fonction-

nementducopieurquandcelui-ciest utilisénormalement.Cependant,

une odeur désagréable peut être ressentie dans les pièces dont

l’aérationestinsuffisanteetlorsqu’uneutilisationprolongéeducopieur

est effectuée. Pour avoir la certitude de travailler dans un

environnment réunissant des conditions de confort, santé et de

sécurité, ilest préférabledebienaérerlapièceou se trouvelecopieur.

EP1085 X-3

As an ENERGY STAR

Partner, we

have determined that this copier meets

the ENERGY STAR

Guidelines for

energy efficiency.

What is an Energy Star Copier ?

Energy Star Copiers have a feature that allows them to automatically turn

off or “go to sleep”after a periodof inactivity, ensuring nightand weekend

shut off. This auto-feature can reduce a copier’s annual electricity costs

by over 60 percent. In addition, high speed copiers will be set to

automatically make double sided copies. An organization’s paper costs

can be reduced and the volume of paper sent into the waste stream will

decline. It takes 10 times more energy to produce a piece of paper than it

does to make a single copy on a copier. Therefore, using less paper also

means decreased national energy consumption.

X-4 EP1085

EP1085

Thank you for choosing Minolta.

This operator’s manual explains how to operate the copier and replenish

its supplies. It also gives some troubleshooting tips as well as general

precautions to be observed when operating the copier.

Toensurethebestperformanceandeffectiveuseof yourcopier,readthis

manualcarefullyuntilyoufamiliarize yourselfthoroughlywith itsoperation

and features. After you have read through the manual, keep it for ready

reference.

Please use this manual as a quick and handy reference tool for

immediately clarifying any questions which may arise.

CE Marking (Declaration of Conformity)

We declare under our sole responsibility that this copier and options to

which this declaration relates is in conformity with the specifications

below. This declaration is valid for the area of the European Union (EU)

only.

Product Type Copying Machine

Product Name EP1085

Options AF-5, S-106, MB-4, Mount kit F

Standards Safety

: EN 60 950 / 1992 (A1 : 1993, A2 : 1993, A3 : 1995,

A4 : 1996)

(Safety of information technology equipment, including

electrical business equipment)

EMC

: EN55 022 Class B:1994 (A1:1995)

(Limits and method for measurement of radio

disturbance characteristics of information technology

equipment (ITE))

EN 50 082-1 / 1992

(Electromagnetic compatibility-Generic immunity

standard Part1 : Residential, commercial and light

industry)

IEC 801-2 / 1991

(Electrostatic discharge requirement)

IEC 801-3 / 1984

(Radiated electromagnetic field requirement)

IEC 801-4 / 1988

(Electrical fast transient / burst requirement)

Notes: *1) EMC performance :

This product was designed for operation in a typical

office environment

*2)First year of labelling according to EC-directive

73/23 / EEC and 93 / 68 / EEC : 98

EC Directives Safety: 73 / 23 / EEC and 93 / 68 / EEC

BMC: 89 / 336 / EEC and 93 / 68 / EEC

EP1085 X-5

Terms and Symbols for the Type of Originals and Copy Paper

A few special terms and symbols are used in this manual to designate

types of originals and copy paper. This page explains about these terms

and symbols.

Feeding Direction (copy paper path)

In this copier system, copy paper is taken up from the right-hand side of

the copier and fed through the copier toward the left-hand side, face up

onto the Copy Tray. In the figure below, the direction in which the copy

paper is fed, as indicated by the arrow, is called the “feeding direction.”

“Width” and “Length”

When we talk about the size of the

original or copy, we call side A “width”

and side B “length.”

A: Width

B: Length

X-6 EP1085

Terms and Symbols Used

 Lengthwise

When theoriginal orcopyhasa“length”

longer than its “width,” we call it

“lengthwise” and use symbol “L” or

““.

 Crosswise

When theoriginal orcopyhasa“length”

shorter than its “width,” we call it

“crosswise” and use symbol “C” or “ ”

Safety Notes

EP1085 1-1

1 Safety Notes

1.1 Installing the Copier

Installation Site

To ensure utmost safety and prevent possible malfunctions of the copier,

install it in a location which meets the following requirements.

 A place away from a curtain or the like that may catch fire and burn

easily.

 An area where there is no possibility of being splashed with water or

other types of liquid.

 An area free from direct sunlight.

 A place out of the direct air stream of an air conditioner, heater, or

ventilator.

 A well-ventilated place.

 A dry place.

 A dust-free location.

 An area not subject to undue vibration.

 A stable and level location.

Power Source

The power source voltage requirements are as follows.

 Use a power source with little voltage fluctuation.

Voltage Fluctuation: Within ±10%

Frequency Fluctuation:50/60 Hz Within ±0.3%

 If any other electrical equipment is sourced from the same power

outlet, make sure that the capacity of the outlet is not exceeded.

 The outlet should be located near the copier and easily accessible.

 Never connect by means of a multiple socket any other appliances or

machines to the outlet being used for the copier.

 If an extension cord is needed, use one with a capacity more than the

power consumption of the copier.

 Make sure that no unusual, excessive force is being applied to the

power cord or extension cord.

Safety Notes

1-2 EP1085

Grounding

To prevent receiving electrical shocks in the case of electrical leakage,

always ground the copier.

Connect the grounding wire to:

 The ground terminal of the outlet.

 Agroundingcontactwhichcomplieswiththelocalelectrical standards.

NOTE

è Never connect the grounding wire to a gas pipe, a grounding wire for

a telephone or a water pipe.

Safety Notes

EP1085 1-3

Space Requirements

To ensure easy copier operation, supply replacement and service

maintenance, adhere to the recommended space requirements detailed

below.

NOTE

è Be sure to allow a clearance of 150mm. or more at the back of the

copier as there is a ventilation duct.

Copier

Copier + Option

Scale: mm

1,250

655253

387

1,085

448 637

841

469372

1,123

448 675

976

497

1,632

1,359

Safety Notes

1-4 EP1085

1.2 Precautions for Use

Operating Environment

The operating environmental requirements of the copier are as follows.

Temperature: 10°C to 30°C (50°F to 86°F) with a fluctuation of

10°C (50°F) per hour

Humidity: 15% to 85% with a fluctuation of 20% per hour

Using the Copier Properly

To ensure the optimum performance of the copier, follow the precautions

listed below.

 NEVER place a heavy object on the copier or subject the copier to

shocks.

 NEVER open any doors, or turn OFF the copier while the copier is

making copies.

 NEVER bring any magnetized object or use flammable sprays near

the copier.

 NEVER place a vase or vessel containing water on the copier.

 NEVER drop paper clips, staples, or other small pieces of metal into

the copier.

 NEVER attempt to remove any Cover that is secured.

 NEVER remodel the copier, as a fire or electrical shock could result.

 ALWAYS insert the power plug all the way into the outlet.

 ALWAYS make sure that the outlet is visible, clear of the copier or

copier cabinet.

 ALWAYS ensure that the copier does not ride on the power cord or

communications cable of other electrical equipment, and it does not

get such a cord or cable wedged into its own mechanism.

 NEVER leave damage or cracks evident on the copier power cord

unattended.Ifyoufindanyoftheseconditions,immediatelyshutdown

the copier, unplug the power cord, and call your Technical

Representative for appropriate action.

 ALWAYS provide good ventilation when making a large number of

continuous copies.

 NEVER keep the copier running when it becomes inordinately hot or

produces abnormal noise. If that happens, immediately turn OFF the

copier, unplug it, and then call your Technical Representative.

Safety Notes

EP1085 1-5

NOTE

Locate the Copier in a Well Ventilated Room

è A negligible amount of ozone is generated during normal operation of

this copier. An unpleasant odor may, however, be created in poorly

ventilated rooms during extensive copier operations. For a

comfortable, healthy, and safe operating environment, it is

recommended that the room be well ventilated.

Placer le copieur dans une pièce largement ventilée

è Une quantité d’ozone négligable est dégagée pendant le

fonctionnement du copieur quand celui-ci est utilisé normalement.

Cependant, une odeur désagréable peut être ressentie dans les

pièces dont l’aération est insuffisante et lorsque une utilisation

prolongéeducopieuresteffectuée.Pouravoirlacertitude detravailler

dansun environnement réunissantdes conditions deconfort, santè et

de sécurité, il est préférable de bien aérer la pièce ou se trouve le

copieur.

Care of Copier Supplies

Use the following precautions when handling the copier supplies (toner,

paper, etc.).

 Store the paper, toner, and other supplies in a place free from direct

sunlight and away from any heating apparatus. Keep them in a dry,

clean environment.

 Store paper, which has beenremoved from its wrapper but not loaded

into the drawer, in a sealed plastic bag in a cool, dark place.

 Use the correct toner for the exclusive use by the copier. The

applicable copier model name is indicated on the Toner Bottle.

 Keep supplies out of the reach of children.

 If your hands become soiled with toner, wash them with soap and

water immediately.

Moving

If you need to transport the copier over a long distance, consult your

Technical Representative.

Safety Notes

1-6 EP1085

Legal Restrictions on Copying

Certain types of documents must never be copied by the copier for the

purpose or with the intent to pass copies of such documents off as the

original. The following is not a complete list but is meant to be used as a

guide to responsible copying.

Financial Instruments

 Personal Checks

 Travelers Checks

 Money Orders

 Certificates of Deposit

 Bonds or other Certificates of Indebtedness

 Stock Certificates

Legal Documents

 Food Stamps

 Postage Stamps (canceled or uncanceled)

 Checks or Drafts drawn by Government Agencies

 Internal Revenue Stamps (canceled or uncanceled)

 Passports

 Immigration Papers

 Motor Vehicle Licenses and Titles

 House and Property Titles and Deeds

General

 Identification Cards, Badges, or Insignias

 Copyrighted Works without permission of the copyright owner

In addition, it is prohibited under any circumstances to copy domestic or

foreign currencies or Works of Art without permission of the copyright

owner.

When in doubtabout the nature of a document, consultwith legal counsel.

Getting to Know Your Copier

EP1085 2-1

2 Getting to Know Your Copier

2.1 System Overview

Automatic Document Feeder AF-5

Permits automatic feeding of multiple

originals, see page 3-6.

10-Bin Sorter S-106 <Option>

Permits sorting copies into up to 10

copy sets or stacks, see page 3-19.

MultiBypassTrayMB-4<Option>

Holdsupto50sheetsofstandardpaper

which is not loaded in any of the

Drawers, allowing to make copies on

them, see page 3-23.

EP1085

The Paper Drawer can hold up to 250

sheets of copy paper (80g/m

). The

Manual Bypass Tray allows you to

make a copy on paper which is not

loaded in the Drawer and which is fed

into the copier manually via this Tray.

EP1085

Getting to Know Your Copier

2-2 EP1085

2.2 Copier Parts and Accessories

Outside Copier

Pcs. Specification Description

1 Control Panel Use to start a copy cycle or to make copying-job settings,

see page 2-7.

2 Original Cover Holds the original placed on the Original Glass in position.

To placean original, raise the Cover and place it in position

on the Original Glass, see page 3-4

3 Power Switch Use to turn the copier ON and OFF, see page 2-12.

4 Manual Bypass Tray Use for manual feeding of paper into the copier,

see page 3-22.

5 Right Door Open to clear a paper misfeed, see page 5-8.

6 Total Counter Shows the total number of copies made so far.

7 Front Door Open to:

 Replace the Toner Bottle, see page 5-2.

 Clear a paper misfeed, see page 5-8.

 Clean the Corona Units, see page 8-4.

Closing the Front Door after a misfeed has been cleared

will turn the Misfeed Indicator on the control panel OFF.

8 Paper Drawer Holds up to 250 sheets of paper. The Edge Guide and

TrailingEdgeStoparemovable,allowingyoutoloadpaper

of different sizes, see page 5-4.

9 Exit Tray Holds copies fed out of the copier.

10 Copy Tray Extender Slide this out when making copies on large-size paper.

8910

Getting to Know Your Copier

EP1085 2-3

Inside Copier

Pcs. Specification Description

1 Original Width/Length

Scale

Place the original along these Scales for correct

positioning, see page 3-4.

2 Original Pad Holds the original in position on the Original Glass.

3 Original Glass Place the original face down on this Glass, see page 3-4.

4 Corona Unit Cleaning

Lever (Upper/Lower)

Operate the Lever to clean the corresponding Corona Unit

if unwanted lines are produced on the copy,

seepage8-4.

5 Lock Release Lever Turn counterclockwise to swing up the Upper Half of the

copier to clear a paper misfeed, see page 5-8.

6 Toner Bottle Contains toner. Replace it with a new one when the Add

Toner Indicator lights up, see page 5-2.

7 Toner Bottle Holder Swing open to replace the Toner Bottle, see page 5-2.

Getting to Know Your Copier

2-4 EP1085

Pcs. Specification Description

8 Upper Half of Copier The copier main body can be divided into two parts, the

upper and lower. The Upper Half can be swung upward,

see page 5-8.

9 Imaging Unit Converts the original image to the copy image.

10 Imaging Unit Lock

Release Lever

Operate when replacing the Imaging Unit, see page 5-18.

11 Dehumidifier Switch Turn ON to prevent condensation from forming on the PC

Drum when power is turned OFF. (For Technical

Representative only)

12 Fusing Unit Handle Hold onto this Handle when lifting the Upper Half of the

Fusing Unit, see page 5-8.

13 Fusing Unit Fuses the toner image onto the paper.

Page is loading ...

Konica Minolta EP1085 Owner's manual

Brand: Konica Minolta

Model: EP1085

Category: Copiers

Type: Owner's manual

Download PDF

report

in other languages

italiano: Konica Minolta EP1085 Manuale del proprietario

Konica Minolta EP1085 Owner's manual

Konica Minolta EP1085 Owner's manual

in other languages

Related papers

Other documents