English
1
For Your Safety: Read this user guide carefully to ensure proper use of the product
and to avoid any danger or physical damage.
Use your player properly to prevent explosion, fire, electric shock, etc.
1. Do not repair the player by yourself, or your warranty will expire.
2. Do not get the player wet or drop it in water.
3. Backup important data to your personal computer as repair or other causes may
result in data loss.
4. Always use the accessories provided by or approved by our company, and do not
spray water on the player.
5. The user guide is for reference only.
z Function Features
A. 1.5-inch color display
B. Stores up to 50~60 images using the bundled photo software
C. Supports JPEG/BMP Photo slide show playback
D. Real-time clock/ alarm/ calendar/ temperature display
z Components and button functions
1. Screen
2. Mode (for photo frame
function)
3. Up
4. Down
5. Thermometer in
F
0
/ C
0
6. Light
7. USB connection
8. Mode (for clock function)
9. Alarm/+12/24
10. Clock battery
z Package contents
¾ DPF-151 ¾ USB cable ¾ User’s manual
¾ CD-ROM with photo compression software and multi-language
detailed manuals
z Charging the battery of DPF-151
The internal battery of the device may be charged using the USB cable when connected to
a powered USB port (such as a USB port on your computer) or hub. At full charge, the
device can provide up to three hours of run time.
Notes:
1. For first time use, connect the DPF-151 to your PC and recharge the battery for 2~3
hours.
2. You can also connect the DPF-151 to your PC and continuously watch the photo slide
show.
10
English
2
z Adding/ removing pictures into the Photo Viewer.
IMPORTANT: You must install the software to your computer first before you connect the
device to your computer.
1. Install the photo viewer driver.
(A) Insert the CD-ROM and install the file “ PhotoViewer for PC” or “Photo Viewer
for MAC” and Follow the on screen instructions.
(B)The application Photo Viewer will be installed on your computer and a shortcut to the
application will appear on your desktop.
<DO NOT LAUNCH THE SOFTWARE YET.>
(C) After the software is installed, connect the device to the computer with the
included USB cable.
(D) After the hardware installation is complete, launch the Photo Viewer application
from the shortcut on your PC desktop.
Note:
You can not view the photos stores in the device directly from “My
Computer”->disk:”G”. The only way is to use the Photo Viewer software.
2. Add pictures into the DPF-151
When you installed the PhotoViewer software and connect the DPF-151, open the
PhotoViewer software to manage your photos.
When
you
open the
Photo
Viewer
software,
the
photos
won’t
display
properly.
You
have to
press
“View
Photos”
first.
English
3
1. Check area (A) to select the
photos stored in your
computer.
2. Select the photos from
thumbnail area (B) and press
(C) button to add the photos
to “Collection Panel” (D).
3. You can press (E) button to
alter the
image
before
transferring
(see
Edit
Images below).
4. You
may
remove
images
from
the
“
Collection
Panel” (D) by
selecting (F or G button).
5. Finally, press (H) button
to
transfer
the
images
in
the
collection
panel
to DPF-151.
z Edit images
1. Select an image to Edit
Select a photo first in the image Preview Area (B) and press Edit Image button (E) to edit
the image.
2. Edit Image
You
can
do
the
following:
Crop:
click
and
drag
the smaller
boxes
to
increase or
decrease
the
area
to
be cropped.
Reposition:
click
and
drag in
the
center
of
the
large box
to
change
the
position of
the
crop.
Brightness
/
Contrast:
click and
drag
the
slider
bars.
Rotate:
u
se
the
Rotate
arrows
for
clockwise
or counterclockwise.
3. Click DONE
The
edited
image
will
be
added
to
the
“C
ollection
panel” (D).
z Basic operations for photo display function
Turn power on/off and play photos
Hold MODE button for 5 sec. (The MODE button is on the top left side of the device.) until
power is on. Press MODE button again (about 5 seconds) to turn off the device.
Manually/automatically view the photos
Once the DPF-151 is on, press MODE button once to change the photo slide show mode
between automatic or manual.
English
4
Delete photos (only under manual mode)
Delete single photo: Hold UP button for 3 seconds and press MODE button to confirm.
Delete all photos: Hold DOWN button for 3 seconds and press MODE button to confirm.
z Basic operations for alarm clock function
Setting the time, year, month, date, day of week
Note:
This
“MODE”
button is on the right side of the device)
1.
Hold
the button
MODE
for 3 sec.
until
you
hear
a
beep
and
the
year
digits
flash
on
the
display.
2.
Repeatedly
press
the button of “
C
0
/F
0
”
and
“
12/24”
to
set
the
correct
year.
3.
Press
MODE
to
confirm.
4.
Repeat
steps
2
and 3
to
set
month,
date,
time
and
the
language
for
the
day
of
the
week.
Alarm
Clock
with
Snooze
-
lets
you
use
it
as
an
event
reminder
(date
alarm),
or
simply
as
a
daily
wakeup
alarm
with
snooze.
Thermometer -
displays
ambient
temperature
in
C
0
or
F
0
.
100
Year
Calendar -
gives
you
the
correct
date
from
2000
to
2099.
Setting the Alarm Time
1.
Press
MODE
(button on right side) to set the
alarm
display.
2.
Press
and
hold
down
MODE
until
you
hear
a
beep
and
the
month
digits
flash
on
the
display.
3.
Repeatedly
press
(
or
hold
down)
“
C
0
/
0
F
0
”
and
“
12/24”
to
set
the
correct
month.
4.
Press
MODE
to
confirm.
5. Repeat
steps
3
and
4
to
set
date and
time.
Note:
if
no
month
and
date
are
set
(
it
shows
“
-
“
),
the
alarm
becomes
a
daily
alarm.
Turning the Alarm/Snooze ON/OFF
1.
Hold
MODE
(on right side)
until
the
clock
shows
the
alarm
display
2.
Hold
ALARM
to
turn
on
the
alarm
( appears
on
the
display),
and
to
turn
on
the
snooze
(
ZZ
appears).
3.
To
turn
off
the
alarm,
repeatedly
press
ALARM
until
it
disappears.
At
the
preset
alarm
time,
the
alarm
sounds
for
one
minute
and
turns
off
automatically.
To
silence
the
alarm
sooner,
press any
key.
Changing 12H/24H Time Format and Temperature Format
1.
In
time
display
mode,
repeatedly
press
“
12/24
“button
to
change
to
12
hour or
24
hour display
format.
2.
In
time
display
mode,
repeatedly
press
“
C
0
/F
0
”
to
change
the
temperature
display
format.
English
5
Replacing the Battery
Your
clock
uses
three
AG12
batteries
for
power.
If
the
clock
does
not
operate,
replace
the
batteries. Follow
these
steps
to
install
or
replace
batteries.
1.
Slide
off
the
battery
compartment
cover (on the rear of the device).
2.
Remove
the
old
batteries
and
i
nsert
three
fresh
AG12
batteries
in
the
compartment
with
the
“+”
polarity
(flat side
of
the
battery)
facing
up.
3.
Replace
the
cover.
-
1
-
2
-
3
-
4
-
5
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
Nextar N1-504 User manual
-
-
Sungale AW15B-WF User manual
-
Pandigital Photo Mail PAN8008DW User manual
-
-
-
-
-
-