Infinity Presidential User manual

Infinity
Brand
Infinity
Model
Presidential
Category
Massagers
Type
User manual
Please read SAFETY INSTRUCTIONS carefully before using the chair.
User's Manual
Presidential Massage Chair
目录目录
准
备
工
作
按
摩
操
作
15
26
27
1
5
6
13
21
24
25
7
8
护理
其他
9
安装
1. The Infinity Presidential features a newly patented soft 3D massage mechanism. It is capable
of reproducing kneading, knocking, shiatsu and fast-rubbing back massage functions to
simulate a live professional massage therapist.
2. With its heated neck and shoulder massage rollers, the Presidential helps relax stressed
muscles and promote blood circulation.
3. The super long rail design provides a multi-angle massage from the neck to the thighs for an
amazing, whole-body massage.
4. Thanks to its space-saving track system, this chair can be placed close to the wall. The
Presidential saves space and looks great!
5. Easily put the chair in the zero gravity mode or the fully-reclined position to relax your mind
and body completely.
6. The user-friendly remote control uses a beautiful, high-definition LCD to show the massage
area, massage techniques, and system state in real time. This system allows for easy selection
of customized massage programs.
7. Equipped with state-of-the-art Bluetooth technology, the Presidential allows users the option of
operating the chair with a phone or tablet without having to use the remote. You can also play
music from your wireless device.
8. The Presidential also utilizes Intersound Technology, allowing the massage to sync with the
rhythm of your music for a personalized experience every session.
9. With this chair’s powerful rollers, full-body air bag system, and heated foot roller system, your
daily stress will melt away.
10. Equipped with multiple sets of air bags in the leg region, the chair performs a pulsating air
pressure massage on the lower extremities to promote blood circulation and restore vitality.
11. The armrests are also equipped with pulsating air pressure massage functions to promote
blood circulation and total relaxation through your fingertips.
12. The waist and hip areas also include multiple air bags to assist with spinal correction and
loosen muscular tension in the lumbar region.
13. With Chinese medicinal heating on the waist, the Presidential promotes blood circulation to
relieve the pain and tension.
14. The footrest can extend over 7 inches, allowing for a comfortable massage for people of various
heights.
To Operate via Bluetooth:
1. Download the Infinity Presidential App on your smart phone or tablet.
2. Open the app and go to the Settings menu, then select “Bluetooth.”
3. Choose your Infinity Presidential from the “Choose Device” menu. The app will now act as
your remote control.
To Enjoy Music Wirelessly:
After downloading the Infinity Presidential App onto your smart phone or tablet, open the
music player software on your device to play your music .
Presidential Massage Chair
Function Introduction
准
备
工
作
按
摩
操
作
护理
其他
安装
Note: We reserve the right to design modification. It is subject to change
without notice. The pictures in this manual are only for reference.
Please refer to the actual product.
1.Thank you for choosing the Infinity Presidential Massage Chair.
2.Please read this manual carefully before using the massage chair.
3.Please keep this manual in a safe place for future reference.
4.Please pay attention to SAFETY INSTRUCTIONS.
Please keep this manual in a safe place for future reference.
Content
External structure parts
Internal structure parts
The adjustment before massage
Operation instruction &function illustration
Manual control
Clean and maintenance
Preparation
Safety instructions
Massage Operation
Malfunction guide
After massage
Mechanical components diagram
Mechanical components list
Maintenance
Others
Technical data
Installation
Installation
1 2
Please read this manual carefully to ensure correct installation and operation of the
massage chair is correct.
“Safety Instructions” are divided into both Warning and Caution recommendations.
Both Warning and Caution include important safety information, so please pay careful attention.
Do not perform indicated action.
Must follow instruction to operate.
Do not disassemble.
Indicates correct operation
of cable.
Warning　 This sign indicates warning of potential injury or bodily harm.
Caution 　 This sign indicates caution of possible damage to the chair.
▲
Symbol Key
The following should be kept for any further references.
Safety Instructions
Safety Instructions
Preparation
Preparation
Warning
Never operate the chair if the cord or plug is damaged, if it is not
working properly, or if it has been dropped into water. Contact our
service center in any of these instances.
To prevent fire, electric shock, or breakdown, use ONLY the
recommended voltage rating.
Any broken, knotted, or twisted power cord should be disposed of
and replaced.
Do not use a charging mobile device to operate the chair.
Osteoporosis patients should consult a doctor before use.
People with heart disease, pacemakers, or other medical
electronic devices should consult a doctor before use.
Pregnant women should consult a doctor before use.
Patients with a high fever should avoid using the chair.
Do not use this chair while intoxicated.
Close supervision is necessary when this chair is used by, on,
or near children, invalids, or disabled persons.
Sleeping in the chair is not recommended.
Do not use the chair when in contact with any type of liquid or
moisture.
Insert the plug of the chair into a suitable and properly-grounded
outlet only. Make sure the plug is completely inserted into the
outlet to reduce risk of short circuit or fire.
When not in use, stop all massage functions, turn all controls to
the OFF position, and unplug.
Ensure there are no obstacles under, behind or in front of the chair
when reclining, extending, or retracting it.
During operation, if at any point you experience pain or discomfort,
stop use immediately and consult your physician.
Use caution when massaging the head and neck.
Avoid massaging the abdomen or knees.
Massage chair use is not recommended for children.
Standing or sitting on the back or armrest is not recommended.
This chair was intended to be used in a relaxed position. Never
force any body part into the backrest area while the rollers are
operating.
Do not fold the massage chair cushions for storage.
Do not leave the chair unattended when plugged in. Unplug
when not in use.
If the chair becomes dysfunctional, broken, or water-damaged, please
have it repaired by professional repairman or send the chair to assigned
service agent. Self-modification, disassembly, or maintenance is NOT
recommended.
If power cord or plug is damaged, do not replace it yourself. Please
contact Infinity Massage Chairs or an appointed dealer for replacement.
To avoid electric shock or injury, please do not open or disassemble
any part of the chair. Contact our technical support for service.
Regularly check the leather, cloth, and any other material of the chair for
damage. If there is any damage, stop operation, unplug, and contact our
service center for repair.
Disassembly
and
Maintenance
Health
Risks
Accident
Prevention
Fire and Electric
Shock
Prevention
Fire and Electric
Shock Risks
Accident/Injury
Risks
Never operate the chair with the air openings blocked. Keep the
vents free of lint, hair, and debris.
3 4
Don't use or store the chair in wet environments (i.e., near
the swimming pool or in the bathroom).
Keep the chair and remote control dry all the time.
Unplug the power if any damage has occurred to the cord
or plug.
Caution
Unplug the power before cleaning the chair.
Unplug the power after using the chair.
Turn the power switch to the OFF position and unplug the
power after each massage session.
Unplug the power immediately in the case of a power
outage.
Do NOT use a plug adapter. If the enclosed plug does not fit
your outlet, please don't change the plug by yourself. Find a
professional electrician to install a properly-fitted outlet.
Hold the plug to unplug the power. Never pull the wire to
unplug the chair.
Safety Instructions Safety Instructions
Preparation
Preparation
To avoid water damage
or electric shock.
To avoid electric shock.
To prevent electric shock
or fire hazard.
To avoid accidents
To avoid electrical damage or
accidents.
Grounding Instructions
Replacing the Fuse
※The chair is equipped with a grounded cord. The plug must be
plugged into a properly-installed and fitted outlet.
※If the fuse is burnt out, turn off the switch and unplug the power.
Open the lid covering the fuse, which is located in the switch box.
Use a new fuse of the same size to replace the old one, then close the lid.
Position the chair minimum of 4 inches from the wall
to allow for sufficient space to recline up and down.
Place and operate the chair on a flat, level surface.
Insert the plug into a properly-grounded
outlet ONLY. The cord or plug should
not be bent or cut off.
Don't press or step on the massage heads.
Don't put hands between the working massage heads.
Don't put hands or feet in the gap of mechanical parts.
Don't drop or embed anything into the massage chair openings.
Don't stand, sit, or place anything on the back rest, arm rest or
leg rest.
Don't stand on the chair during operation.
Don't move the chair during operation.
Don't pull out the plug or turn off the power during operation.
Don't put extremities between or beneath the leg rest.
Don't use the massage chair while wearing hair ornaments.
Empty pockets before every massage.
Don't sit or press on the backrest when the chair is in the
reclined position.
Don't use the chair on bare skin or while wearing thin
clothing, as this can cause skin irritation.
Caution
Keep the chair away from stove or other heating appliances.
Do not place the chair directly under the sun or in
locations of extreme temperatures.
Do not use electric blankets or other heating products
on the massage chair.
To avoid sudden falls or damage.
The maximum suggested operating time is 30 minutes.
Continuous massage in the same position for long
periods of time may cause discomfort.
Before sitting on the chair, inspect everything to
confirm that the massage heads and other parts are
in the correct position.
Give your body time to recover.
To avoid electric shock in the case
of a leakage or breakdown.
To prevent upholstery from becoming
faded, discolored, deteriorated, or
hardened.
Do not use the chair outdoors.
Keep the chair away from heat, moisture, sharp objects,
and corrosive materials.
Make sure the plug is completely inserted into the
outlet.
To reduce risk of short circuit and any
fire hazard.
To avoid injury when powering on or
off.
Turn off all controls before removing plug from outlet.
Checking for any damage on wire. Ensure it has not
come into contact with any liquid or moisture.
Please make sure that the power switch is in the“OFF”
position before inserting the plug into the outlet.
To ensure chair can fully recline.
To avoid accidental injury.
To avoid accident or injury.
Do not place in a heavily dusty or flammable environment.
Do not put the chair in a cramped space or in an area with
poor circulation.
Remote control should be stored in the pocket or on the
bracket when not in use.
5 6
Heated Massage Rollers
Side Calf Air Bag
Sole-Heating Plate
Internal Structure Parts
Internal Structure
External Structure
External Structure Parts
Preparation
Shoulder Air Bag
Lower Back Air Bag
Arm Air Bag
Side Seat Air Bag
Calf Air Bag
Foot Air Bag
Foot Roller
Preparation
靠背
Fuse holder
Power Cord
Socket
Power Switch
Power Case
Backrest
Remote Control Pocket
Right Shoulder Air Bag Massager
Seat
Back Seat Cushion
Right Armrest
Legrest
Footrest
LED light
Left Shoulder
Air Bag Massager
Left Armrest
Base
Head Cushion
Right Speaker
USB Port
Lumbar Heat
LED Light
8
1
1
1
1
1
1
1
11
12
13
14
15
16
17
18
1
2
3
4
7
6
1
1
1
1
1
5
9
10
1
1
1
1
13 14
按摩操作
按摩 操作
7 8
1
1
19
20
21
1
1
1
22
23
24
25
28
27
1
1
1
1
1
26
1
1
2
8
Sliding forward electric
actuator
Left side of internal
fender assembly
Seat bottom frame
assembly
Power box cover
Back cover assembly A
Right side of internal
fender assembly
Right armrest convert
frame assembly
Front fender assembly
Seat electric actuator
Legrest and footrest
assembly
Left armrest convert
frame assembly
Shoulder device assembly
RK08 massage machine
Back cover assembly B
Backrest assembly
Mechanical Components Diagram
NO. Q'tyName
Mechanical Components List
Explosion Diagram
Preparation
Preparation
Mechanical Components List
Q'tyNameNO.
Right armrest assembly
Right side fender
Left side fender
Left amrest assembly
Power case assembly
Back frame assemly
Left side of seat airbag
assembly
Pillow
Back and seat cushion
Right side of seat airbag
assembly
Seat frame surface assembly
Footrest electric actuator
Remote control pocket
9 10
① Remove the chair body from the box. This should include the chair body, back
seat pad, pillow, power cord, remote control and control pocket. This requires at least
three people. While two people hold the seat frame on the two sides, the third
person should hold the backrest, working together to lift the chair out slowly.
See below:
①
③
③
②
Remote Control Pocket
Remote Control
④
⑤
④
Two people grasp left
and right metal seat
frame, while the other
holds the backrest,
slowly removing the
main body of massage
chair from the box .
①
To install the leg rest onto the main body: ① Unscrew the bolt on the hanger of the leg rest.
② Connect the leg rest air hose to the corresponding air nozzles of the main body tightly.
③ Plug the two power cables into the socket securely. Be careful to match the color and
direction: black to black, white to white. ④ Raise the rotation shaft board on the hangers,
lift the leg rest with your hands, place the rotation shaft into hangers on main body, then close
the rotation shaft board. ⑤ Screw it back tight. ⑥ Connect the leather leg rest cover to the
seat with the Velcro piece.
③
Black
White
②
③
②
④
Electric Power Cable
Head Cushion
Installation
Installation (1)
Installation (2)
Installation
Installation
Installation
Back Seat Cushion
Step 1. How to Move the Chair
Right Armrest
Left Armrest
Leg Rest Device
② Remove the left and right armrests from
the armrest box. Hold each side of an
armrest and take it out slowly, one piece at
a time. Please note: The armrest is placed
upside down in the box. Place the armrest
box on a table or on level ground (be
careful to avoid scratching either armrest).
Step 2. How to Assemble the Leg Rest
Axis cover
Hanger
Bolt
Socket
Air nozzle
Axis
Power line plug
Air tube
Lift the legrest to
insert the axis into
the hanger.
Put down the axis
cover and screw
on the bolt.
Air hoses connect to the air nozzle
and power cord connects to the
socket.
Air tube
Massage Chair
Main Body
OK
3D- 3D+
Air
Intensity
Hot
Rocks
On/Off
Auto
Menu
Zero
Set function by pressing Menu key.
Speed
Width
Intensity
3D：
20 min
③ Remove the leg rest device from the leg
rest box. Hold the leg rest by both sides to
take it out. Place it on level ground.
Again, remove carefully to avoid scratches.
Step 2: How to Use the Remote Control
Take out the remote control and plug it into the socket on the right side of massage chair seat.
When plugging in the remote, be sure to use the alignment guide on the plug and screw the nut
tightly. After attaching the armrest and remote control pocket, place the remote in the pocket.
Plug in the remote
control and screw
the nut tightly.
Remote Control
Remote
Control Plug
Remote Control
Cord Socket
Pay attention
to the alignment
guide.
OK
3D- 3D+
Air
Intensity
Hot
Rocks
On/Off
Auto
Menu
Zero
Set function by pressing Menu key.
Speed
Width
Intensity
3D：
20 min
11 12
In ON status, the USB port can be used for charging
a mobile device. Do not move a mobile device during
charging.
1
2
3
1
2
3
4
4
5
▲
①
②
②
③
④
1
2
②
③
④
⑤
Step 5.Restore the Chair.
Plug the power cord into the hole on the power
box as shown in the right picture.
Connect the power cord to a properly-fitted outlet.
Turn on the switch behind the power box.
("O/I" is on/off switch; Press I down to turn on.)
Toggle on/off button on the control twice to
restore the chair to its initial state. Select the
massage function by remote, or by the smart
phone or tablet app. Enjoy your relaxing and
pleasant massage.
Step 4. Attaching the Back Seat Cushion, Head Pad, and Remote Control Pocket
① Lift the front side of the armrest and plug it into the rotating stand on the side of chair body. ② Connect
the air hose of the armrest with the air tubes on the side of chair body securely. The black air tube should
be connected with the air hose marked as No. 1, and the gray air tube with the air hose marked as No. 2.
③ ④ Insert the rear fixed Plug the power cord on the side of chair body into the socket of the armrest.
plate into the fixed hole behind the chair body, and press the armrest downwards gently to install.
⑤ Remove the rubber cap from the inner plate of the armrest. Fasten the screws inside the hole, then
re-insert the rubber cap. ⑥ Assemble the other armrest according to the above steps. Don't squeeze air
tube or power cord during the installation procedure.
How to Disassemble the Armrest: ① Adjust the backrest to the lowest setting and restore the leg-rest
before disassembly. ② Remove the rubber cap inside the armrest and loosen the screw inside the hole.
③ Tilt the armrest a little upwards and disconnect the air tubes and power cord. ④ Continue to tilt the
armrest upwards to dismantle it. ⑤ Re-insert the rubber plug into the round holes inside the armrest.
Power Box Socket
Chair's Initial State
Installation
Installation (3)
Installation (4)
Installation
Installation
Installation
Step 3 How to Assemble the Left and Right Armrests .
Make sure the switch is OFF before
connecting the chair to power.
Connect the back
seat cushion to the
upper backrest with
the zipper.
Connect the pillow
to the backrest
with the Velcro.
Connect the back
seat cushion to the
two sides of the
backrest with the
zipper.
Put the back seat cushion and head pad onto the backrest
and connect the two parts with zipper and Velcro.
Usage Tips
To allow the chair to accurately scan your body, make sure
when you sit on the chair that the bottom rim of the head pad
is flush with your ears before zippering parts together. This
will provide the most effective and comfortable massage.
Back Seat Cushion
Head Pad
Backrest
Head Pad
Back Seat
Cushion
Assembly Steps
Rotating Stand on
Side of Chair Body
Inner Plate of Armrest
Power cord
Rubber Cap
Fixed Hole
Fixed Panel
Air Tube
▲
①
⑤
USB Charging
Port
Insert the Velcro of the
control pocket into the
upper part of right side
inner armrest airbag
and connect it to the
matching Velcro.
Connect the
backrest cushion
to the seat and leg
part with the zipper.
OK
3D- 3D+
Air
Intensity
Hot
Rocks
On/Off
Auto
Menu
Zero
Set function by pressing Menu key.
Speed
Width
Intensity
3D：
20 min
Remote Control
Pocket
When installing the back
seat cushion, be sure to
align the middle part of
the back cushion with
the middle part of
the backrest.
13
14
1
Make sure the
massage rollers in the
upper backrest are not
operating, then sit on the
chair slowly to avoid injury
caused by incorrect
positioning of the head
rollers.
Body-Sensing Scan Technology
During the body scan, if the massage chair
can’t detect the position of your body, it
defaults to the middle position (shoulders).
▲
Armrests cannot be moved during
massage chair reclining process.
Check
Adjustment Before Massage
Caution
Safe Chair Environment
Inspect Environment
Don’t use the chair in wet places, like near
a swimming pool or in the bathroom, as
this could cause damage or electric shock.
Don’t place under direct sunlight, near
the stove, or in other hot environments
to avoid upholstery deterioration.
Place the chair on a level surface to
prevent sliding or unexpected damage.
Check In Front of and Behind Chair
When reclining the chair and extending the leg
rest, make sure there are no obstacles in front
of or behind the chair.
Check Power Cord and Plug
Space Requirements
Position the back of the chair at least 4
inches from wall.
(1) Regularly clean the plug of any dust using
a dry cloth.
(2) Ensure the power cord is not damaged,
bent, stretched, knotted, or caught under
anything, including the chair.
Leave at least 12 inches in front of the leg
rest.
Check Chair Surroundings
When reclining the backrest or extending the
leg, be sure to:
(1) Check all sides of the chair for any people
or objects.
(2) Confirm there is sufficient space for the
chair to fully extend.
Cha
ir
Op
er
a
tion
Recommendations
Adjustment Before Massage
Safely Moving Your Massage Chair
Adjusting the Chair Before Your Massage
Caution
Do not move the chair during operation in
case of accidents or damage.
Ch
a
i
r
Op
e
r
a
t
i
on
How to Move Your Chair
Bind the cables and put them on the seat to
avoid damage while moving the chair.
Do not drop the chair in order to prevent damage
to the internal parts and functions.
Do not slide the chair if the floor is made of
wood or other easy-damaged material. Two (2)
or more people will be required to lift the chair.
Make sure the power is off and the plug
doesn't drag on the floor. Leave the
chair in its upright position to
prevent the backrest from
hitting the floor.
To Move the Chair by Pushing:
Lift by the leg rest to tilt the chair back on its
base. Then, push the chair to desired
destination and set it down.
Be sure to hold the footrest to move the
chair as shown in the picture to avoid
scratching the leatherette.
If you feel the
massage isn’t strong
enough, remove the
pillow or cushion to
increase intensity.
Because the chair is heavy, it could mark or
damage your floor. Please place a blanket or
other protection under
the chair to prevent
damage.
Before Adjustment
Remain still and make sure the body scan is
finished correctly for the best massage.
Correct Position: Your back
should be flush to the
backrest, with your head
lying flat on the pillow.
The remote control will
beep once the body scan is complete. If a
micro-adjustment is needed, just press the
up/down key on the remote control.
手控器使用方法
15
16
1. Press the on/off key to enter POWER ON status. Press Menu or other
buttons to select any auto or manual program. The massage chair will start the
body scanning process, and then begin the massage. Press the on/off key to
power off and put the chair back in the upright position. Remote control will turn
off in 3 to 5 seconds.
5. In the ON status, press this key to activate different auto modes. Six common auto
modes and six special auto modes are available for your choice: Recovery, Relief,
Stretch, Music Sync, Renew, Calming, Refresh, Energy, Revive, Active, Relax and
Healing. Relative screen display is shown on the controller.
12. In the ON status, press this key to put the chair in the zero-gravity position. Press
it again to enter sleep mode. Press it once more to return to the upright position.
OK
Air Intensity
Left
6. There are four direction buttons: Up, Down, Left and Right. In the Menu interface, it
is the navigator button: Press Up or Down to quickly browse the menu, and press
Left and Right to go to the previous or next menu. The Up and Down button can also
be used to adjust the massage roller position in the body-scanning mode. In the auto
and manual modes, the Left and Right button can be used to adjust 3D intensity.
OK
Hot Rocks
2. In the ON status, press this key to begin the HOT ROCKS program. The default time
is 5 minutes. Click this button again to will increase the duration by 5 minute
increments at a time, up to a maximum of 30 minutes. In HOT ROCKS mode, the
massage chair heat is turned on automatically at the highest heat setting.
3. In the ON status, press this key to adjust the air intensity either in auto mode or in
the air massage program.
3D- 3D+
3D- 3D+
Air
Intensity
Hot
Rocks
On/Off
Auto
Menu
Zero
Set function by pressing Menu key.
Speed
Width
Intensity
3D：
20 min
Manual Control
Manual Control
Up
Down
Right
Leg Rest Up &
Backrest Down
On/Off
Auto
Confirm Button
Leg Rest Down
Zero Gravity
Menu
Manual Control
C
ha
ir O
pe
r
at
io
n
Ch
a
i
r
Op
era
ti
on
Leg Rest Up
Backrest up &
Leg Rest Down
3D- 3D+
On/Off
Hot
Rocks
Air
Intensity
Menu
Auto
Zero
8. Hold this button to raise the leg rest and release it to stop at the desired height.
The remote control screen will display “massage position adjusting...” at the bottom
of the screen when adjusting the position of the chair.
9. Hold this button to raise the backrest and lower the leg rest. Release it to stop at
the desired position. The remote control screen will display “massage position
adjusting...” at the bottom of the screen when adjusting the position of the chair.
10. Hold this button to lower the leg rest, and release it to stop at the desired position.
The remote control screen will display “massage position adjusting...” at the
bottom of the screen when adjusting the position of the chair.
4. Press this button in the Main interface to switch to the Menu interface, where you
can choose a different massage function. Press again while in the Menu interface
to return to the Main interface.
11. Hold this button to recline the backrest and lift the leg rest, then release to stop at
the desired position. The remote control screen will display “massage position
adjusting...” at the bottom of the screen when adjusting the position of the chair.
7. In the ON status under the Menu interface, press the OK button to confirm menu
choice and enter next menu.
17
18
Zero
Manual Mode: Press Menu, select
manual mode, and press OK. Manual
mode functions include: Mode, Position,
Width, Speed, 3D and Footrest. Select
one function, then press OK to go to the
next menu.
Shiatsu
Back Rubbing
Finger Knead
Level 1
Level 2
Level 3
Level 4
Level 5
Auto Mode: Press Menu, select auto mode, and press OK. The
auto mode includes six programs: Refresh, Energy, Revive, Active,
Relax and Healing.
Partial: Massage chair will center on the current position and move up and down in circles
within certain limits.
English
简体中文
한국어
Tiếng Việt
Español
Language
LED Lights
3D+
3D-
Out
In
1. When selecting the massage mode, the default position is Whole, which performs a one-time body scan.
2. Partial and Point massage don’t use body scan. In other words, if during the body scan or before the
body scan completes, you select Partial or Point, the body scan will stop and directly enter the corresponding
function. If you switch back to Whole or select another mode at this time, body scan will be activated again.
Note:
1. During all auto massage settings, the
default setting for the foot rollers is on.
Press “Stop” under Roller to turn it off.
2. Under Airbag, when selecting Full Body
or Legs & Feet, the foot roller is on.
Press “Stop” under Roller to turn it off.
3. When selecting Upper Body or Waist &
Seat under Airbag, the foot roller is off.
Press “Quick” or “Soft “to turn it on.
Settings: Press MENU,
then set the language and
LED lights using the
navigator buttons.
Heating: Press MENU and select
Heating with the navigation key.
User can turn the heat on or off.
When it is on, the heat symbol in
the main interface will light up.
Back ON
Waist ON
Foot ON
TEMP+
TEMP-
3D（Level 1, 2, 3, 4, 5, 6）
Armrest LED Light Status
Heat Status
Display
Temperature Level of
Massage Machine Heat
(Level 1, 2, 3, 4, 5, 6, 7)
ON
OFF
Set function by pressing Menu key.
Speed
Width
Intensity
3D：
20 mi n
Partial
C
ha
ir O
pe
r
at
io
n
Manual Control
LCD Display Graphic Description
Ch
a
i
r
Op
era
ti
on
Manual Control
LCD Display Graphic Description
Press “on/off” button; when power is on, the remote will beep briefly. LCD
screen will display the start-up screen, and after 2-3 seconds it will display
the main interface and enter standby mode. The main interface shows the
massage position, method, time, heat, current massage status, etc. All
information will be updated as soon as the chair is fully turned on.
Main interface
Kneading
Tapping
Knocking
Pressing
Zero gravity
Massage
Time Left
Massage function
Massage Speed （Level 1, 2, 3, 4, 5）
Massage Width (narrow, mid, wide)
Air Intensity（Level 1, 2, 3, 4, 5）
Massage Position
Menu interface
Recover
Relief
Stretch
Music Sync
Renew
Calming
Special
Select by the navigation keys
Auto
Manual
Airbag
Roller
Heating
Timer
Settings
Stop
Refresh
Energy
Revive
Active
Relax
Healing
Menu
Press the Menu button in the main interface to switch to the Menu
interface. Here you can set all massage functions. Press the Menu
button in the Menu interface to exit and return to the Main interface.
Mode
Position
Width
Speed
3D
Footrest
Select by the navigation keys
Auto
Manual
Airbag
Roller
Heating
Timer
Settings
Stop
Menu
Narrow
Middle
Wide
Kneading
Tapping
Knocking
Knead&Tap
Pulse Shiatsu
Point
Whole
When the massage chair is in manual fixed
point work modes, users can use the up/down button to adjust the massage position.
Information for “massage position adjusting...” will appear at the bottom of the display screen.
Position
Intensity
OFF
Select by the navigation keys
Full Body
Upper Body
Waist & Seat
Legs & Feet
Menu
Auto
Manual
Airbag
Roller
Heating
Timer
Settings
Stop
Airbag: Press MENU button and select “air pressure”
with the navigation key, then press the OK button. There
are two kinds of air pressure functions: Position and
Intensity. Choose the corresponding function, then press
OK to go to the next menu and choose required function.
Foot Roller: Press MENU button,
select foot roller massage with the
navigation key, and press the OK
button. Then choose either the “Quick”
or “Soft” mode, and click OK again.
Quick
Soft
Stop
Select by the navigation keys
Menu
Auto
Manual
Airbag
Roller
Heating
Timer
Settings
Stop
Select by the navigation keys
Menu
Auto
Manual
Airbag
Roller
Heating
Timer
Settings
Stop
10 min
20 min
30 min
45 min
Menu
Auto
Manual
Airbag
Roller
Heating
Timer
Settings
Stop
Select by the navigation keys
Timer: Press MENU and use
the navigation key to select “Timer.”
Choose a massage time:30 minutes,
20 minutes, or 10 minutes. The
default time is 20 minutes. The chair
will turn off automatically after the
time is up.
Select by the navigation keys
Menu
Auto
Manual
Airbag
Roller
Heating
Timer
Settings
Stop
Stop: Press MENU and select
“Stop” using the navigation key
to stop massage and return
to the Main interface.
When Power is on, the first time you use the
auto program, the massage chair will start
the body scan and “body scanning...” will be
displayed on the screen. After the body
scan is finished, the buzzer will tick 5 times
(once every second). At this point, the
massage rollers are in the shoulder position. You can press Up and
Down to adjust. When adjusting, “shoulder height adjusting...” will be
displayed on the screen. The default working time is 20 minutes. The
massage chair will turn off and reset to its upright position once the
massage is over.
Set function by pressing Menu key.
Speed
Width
Intensity
3D：
20 mi n
Auto-Recover
Level 1
Level 2
Level 3
Level 4
Level 5
19
20
1
① Operate according to controller operation
instructions.
2
3
2
a
1
3
② When the massage ends, the massage chair
will return to the default position and the
remote control will display “Shutting down,”
then turn off after 3-5 seconds.
手控器
On/Off
On/Off
4
① Insert matching end power cord plug line
into hole “a” on base of chair.
② Plug power adapter into outlet.
③ Turn on the power switch, located on the
power box.
Press “On/Off” on the remote, which will ④
beep once and display the Infinity logo. It
will then enter the display interface.
Press this remote control
button to recline the
backrest and raise the
leg rest. This puts the chair
in the zero gravity position.
Press the button
again to restore
the chair to its
default position.
Benefits of Zero Gravity
The zero gravity
position is based on
the NASA Space
capsule relax
theory. Zero gravity
reclines the backrest,
seat, and leg rest to
ensure a 128-degree
angle between the body and legs. This
makes the heart level with the knees to help
improve blood circulation and lower blood
pressure. The zero gravity position also
distributes your weight across the massage
chair to give you a weightless feeling. This
reduces pressure on the spine and increases
blood flow to and from the heart. Zero gravity
provides the ultimate massage experience by
placing your body in a completely relaxed,
natural, and comfortable position.
Operation Instructions and Function Illustrations
C
ha
ir O
pe
r
at
io
n
ON/OFF
Step 1. Power On
Power switch
Step 2. Massage
Step 3. Turn Off the Power
① When the chair is On, press On/Off button
to turn off the massage chair and it will
reset automatically.
Turn off the power switch on the bottom of ②
the back of chair after the rollers return to
the storage position.
Unplug the power cord from the outlet.③
1. Before using, lift the pillow,
back cushion, etc. to check if the
PU material is broken. If there is
damage, please stop using,
unplug the chair, and contact our
tech support for repair.
2.Only plug into a grounded outlet.
Warning
Attention
1. Before sitting down, make sure there
are no objects wedged between the
armrest, leg rest , backrest and seat
of the chair.
2. Make sure the chair is in default
position before using.
3. Do not stand on the massage chair,
especially during operation.
Ch
a
i
r
Op
era
ti
on
Operation Instructions and Function Illustrations
Function Illustration
Leg Rest Up
Press this button on the remote
to raise the leg rest. Release
the button to lock the leg rest in
this position.
Leg Rest Down
Press this button on the remote
to lower the leg rest. Release
the button to lock the leg rest
in this position.
Press this button on remote to recline
the backrest and raise the leg rest.
Release lock the massage chair
in this position.
Leg Rest Up and Backrest Down
Backrest Up and Leg Rest Down
Press this button on the remote
to raise the backrest and lower
the leg rest. Release this button
to lock the massage chair
in this position.
1. Please make sure there is no people, no pets or any stuff within range for backrest to avoid unexpected hurt or
property loss.
2. When adjusting the backrest, be careful the gap between the backrest and armrest.
3. When the legrest is moving, please do not stand on or leave from the seat, do not stop the legrest from moving
in case of causing damage to the chair.
4. Please refer to control instruction for more details.
Zero Gravity
OK
3D- 3D+
Air
Intensity
Hot
Rocks
On/Off
Auto
Menu
Zero
Set function by pressing Menu key.
Speed
Width
Intensity
3D：
20 min
21 22
After chair returns to the upright position,
store the remote control in the pocket.
5
5
6
7
4
3
2
1
On/Off
Adjust the back cushion and pillow to the
original position.
Legrest can extend and retract within 8”
automatically.
This massage chair uses
space capsule-type
armrests with a built-in
pulsating air pressure
massage function. Put
your arms between the
armrest air bags. After
filling with air, a kneading
massage begins on the
arms and hands.
Heated Foot Therapy
New Curved Rail Provides Back and
Buttocks Massage
Music Therapy
Operation Instructions and Function Illustration
Function Illustration
C
ha
ir O
pe
r
at
io
n
C
ha
ir
Op
e
r
a
t
io
n
Legrest Extend and Retract
Arm Massage
1. Please make sure there are no people, pets or objects within range of the backrest in order to avoid injury or
damage.
2. When adjusting the backrest, beware of the gap between the backrest and armrest.
3. When the leg rest is moving, please do not stand on or get up from the seat. Do not try to stop the leg rest from
moving, as this could cause damage to the chair.
4. Please refer to the control instructions for more details.
After Your Massage
Make sure there are no people, pets, or objects
within close range of the backrest and leg rest.
Restore the backrest and leg rest to the
standard, upright position using the
remote, or press ON/Off key to restore the
chair to its default position.
Switch off the power.
Unplug the electricity from the outlet.
(Attention: Hold the plug properly and pull,
as illustrated below. Do not pull by the cord.)
Clean the chair if necessary.
Attention!
After using, press ON/OFF to end all massage
functions and wait for the chair to return to its
original position.
Turn off the power and unplug the chair from
the outlet. Keep the chair away from moisture,
dirt, and old insulation to prevent damage.
Restoration of Massage Chair
The Infinity Presidential uses curved rail
technology combined with a patented 3D
massage mechanism for a multi-angle,
integrated massage to the back and
buttocks. This rail design offers all
the benefits of the traditional
L-track design, PLUS
the ability to recline
in an entirely flat
position and
fully stretch the
body.
Shoulder Massage
Multi-layer, exposed air
bags are located on both
shoulders to assist with the
stretch function. The 3D
massage function pushes
your body, while the air
bags grip your
shoulders to provide
the ultimate full-body
stretch.
Or
OK
3D- 3D+
Air
Intensity
Hot
Rocks
On/Off
Auto
Menu
Zero
Set function by pressing Menu key.
Speed
Width
Intensity
3D：
20 min
There are multiple speakers surrounding
the headrest. The Bluetooth wireless
music player function integrates music into
the massage techniques with synchronic
therapy, which allows the rollers to
massage you to the beat of your music.
Relaxing to your own tunes will improve
your mood and ease fatigue.
The Presidential includes
the innovative two-way,
rotating foot-kneading
technique. These foot
rollers knead the soles
of the feet while heating
them to perform the best
foot massage
experience.
23 24
常见现象处理
合成皮革 塑胶区域
●
1
●
2
●
3
●
4
Cleaning and Maintenance
Synthetic Leather
Clean the Controller
Cloth Material
Plastic Parts
Dip soft cloth into a 3-5% neutral detergent
solution, squeeze it, then clean the stain on
the surface gently.
Wash the cloth, squeeze it, and wipe the
surface with detergent.
General Cleaning
Dry the surface gently with a dry cloth.
Allow to air-dry. Do NOT blow dry.
●
3
●
4
●
1
●
2
●
3
●
1
●
2
●
3
●
4
About Cleaning
Before cleaning, unplug the electricity.
Never touch the plug with wet hands.
Make sure hands are dry when plugging
into the electrical outlet.
Failure to follow these instructions may
cause user to experience electric shock.
●
●
2
●
1
3
D ip cloth into weak neutral
detergent, squeeze it, and clean
the cloth material surface.
Diluents, gases, and
alcohols are prohibited.
Brush the dirty spots
with weak neutral
detergent, avoiding excessive
brushing.
Excessive cleaning may cause
damage to cloth material.
Wipe with a water-dampened cloth.
Allow to dry.
●
1
●
2
●
3
Dip cloth into neutral detergent,
squeeze out excess, and clean.
Wipe with a water-dampened
cloth.
Allow to dry.
●
1
●
2
Wipe with soft, water-dampened cloth.
Allow to dry.
Propellants, diluents
and alcohols are
prohibited.
●
1
Maintenance
Troubleshooting
Malfunction Guide
FAQs and Troubleshooting
Note: If the issues persist after attempting troubleshooting, please turn off the power switch,
unplug the chair, and contact the manufacturer or technician for repair service.
Issue
Possible Reason
Troubleshooting
The massage chair won’t
work when power is on.
Massage chair suddenly
stops working.
Check if the control is on or not.
Set massage time is up.
Open the control switch.
A massage function was not selected. Choose a massage function.
This is a normal sound and there
is no need for concern.
This is normal function of the rollers
and there is no need for concern.
Turn off the power and allow the
massage chair to rest for at least
half an hour before next use.
Re-connect the electricity to power.
The plug is not properly inserted into
the electrical outlet.
This is the sound of the air pump, motor
and mechanical parts.
Normal wear-and-tear on inner parts
after much use.
The massage chair
suddenly becomes much
louder during operation.
Remove the obstacles; turn off
the power and allow the massage
chair to rest for at least half an
hour before next use.
Check if there are any obstacles; the
chair has safety functions that will shut
it down if there is an object blocking
normal function.
Neither the backrest nor the
leg rest can move.
Please ask manufacturer or appointed
or authorized technician for service.
Excessive operation; setting time is up.
The chair can't return to its
original position.
Massage rollers work on shifts.
Different height of the left
roller and right roller.
Make sure plug is properly inserted into the
outlet.
There is a beeping sound
inside the massage chair
during operation.
This could be caused by running the
chair for an extended period of time.
Please ask an appointed or
authorized technician for service.
Electrical wire or plug
becomes hot.
Turn off the power and allow the
massage chair to rest for at least
half an hour before next use.
Wire or plug is damaged.
Please ask manufacturer or authorized
technician for service and/or
replacement.
The fuse burned out.
Replace with the same type of fuse.
Something is wrong with inner circuit.
Please ask an appointed or
authorized technician for service.
Sudden power loss.
Turn off the power and allow the
massage chair to rest for at least
half an hour before next use.
Stop use immediately and ask
manufacturer or authorized
technician for service.
It may have overloaded.
Other abnormal case causes wire or
plug to continue overheating
If Leather is Dirty:
Note: Do NOT use
chemical or medical
cleaning products.
OK
3D- 3D+
Air
Intensity
Hot
Rocks
On/Off
Auto
Menu
Zero
Set function by pressing Menu key.
Speed
Width
Intensity
3D：
20 min
Clean with clean, soft,
and dry cloth.
25
Ⅰ
280W
Technical data
Technical data
Others
Name
Model
Input voltage
Safety design
□AC120V，60Hz
□AC220V，50/60Hz
□AC240V，50Hz
Class
NW/GW
Packing size
Power
Main body :253/302 lbs
Armrest :32/43 lbs
Legrest &footrest : 66/76 lbs
Main body:59.8×31×38 ”
Armrest : 38.5×15.5×28 ”
Legrest &footrest :23 × 20 × 24 ”
（L×W×H)
Presidential
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15

Infinity Presidential User manual

Infinity
Brand
Infinity
Model
Presidential
Category
Massagers
Type
User manual
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents