Imported by : C.I. LTD.
oronto, Ont.,
M9W 5C1
INSTRUCTION MANUAL
FOR
WINE COOLER
FRW120
Please read this manual carefully, and make sure to keep
this manual in the place accessible by the user at any time
MADE IN CHINA
1、GENERAL SAFETY PRECAUTIONS
Please read this manual carefully and make sure this manual accessible
for users at any time.
After removing the wine cooler from the packing, make sure it is in
good condition.
Plastic bags, etc. should be out of reach for children as they are
checked for potential hazardous.
Before connecting this appliance, read the operation manual carefully
and check that the rating data on the rating nameplate corresponds to
your power supply.
The manufacturer will not respond for any damage due to improper
use.
Before cleaning the wine cooler, make sure it is unplugged. Never
clean the unit with an acid preparation, dilution, gasoline, oil or any
other kind of chemical substance that could damage the wine cooler.
Repair should only be made by authorized service centers.
Caution-moving: Do not operate unit with specify appropriate part
removed.
Caution-risk of electric shock. Disconnect power before servicing unit.
Caution-don’t use exterior cord as they are checked for potential
hazardous.
2、ILLUSTRATED STRUCTURE
1
2
3
4
5
6
7
8
⑴ Foot ⑵ TEMP-ADJ Button ⑶ Case ⑷ Cooling System
⑸Shelf ⑹ Inner light ⑺ Door ⑻LED display
3、TECHNICAL DATA
Model No. FRW120
Volume(liter) 38L
Weight(kg) 14
Shelf 4
Ambient Temperature ≤25℃
Consumption (kW.h/24h) 0.55
Cooling Temperature 8℃～18℃
Rated Voltage AC110-120V
Rated Frequency 60Hz
Input Power 62W
4、OPERATION OF WINE COOLER
There is TEMP-ADJ button on the rear of wine cooler. The temperature
is adjusted in the range of 8℃～18℃ in the cabinet.
Min
M
a
x
When the power supply is connected, cooling system starts to work.
The TEMP-ADJ button is set at certain point, when the wine cooler is
off at the pre-set line.
A light installed in the case, when open the door, the light is
automatically turned on, when close the door, the light is
automatically off.
You can know what temperature is exactly inside the case by
reading the LED.
5、PARTICULAR PRECAUTIONS
In order to function at its potential, this wine cooler needs to be placed
on flat floor, with 2cm spaces at each side and 10 cm at the backside.
Place the wine cooler fully horizontal.
Avoid direct sun shine and very high temperature.
Do not place heavy articles on the top of the wine cooler.
6、 MAINTENANCE
Disconnect power supply before cleaning cabinet.
Do not use soap or detergent for the cabinet.
Clean the wine cooler regularly.
7、 ELECTRIC PRINCIPLE DIAGRAM
Semiconducting chip
M
fan
Display
S w i t c h p o we r
WH
Pl ug
BK
GN
lamp
switch
11 0 12 0 V
6 0 Hz
-～
The technical data stated in the Instruction Manual may vary at the
constructor’s discretion without notice. Please refer to the data nameplate on
the wine cooler, technical data plat fitted on the wine cooler.
/