Sanyo XT-55S8200U Owner's manual

Brand: Sanyo

Model: XT-55S8200U

Category: LCD TVs

Type: Owner's manual

This manual is also suitable for

XT-49S8200U

Product page

(Ultra HD )

XT-49S8200U

LED TV

E-mail: [email protected]

Need help? Please Call at Toll Free No. 1800 419 5088

To obtain a more detailed Electronic Copy of this

Manual or much further contents,go to product page

at our website www.sanyoappliance.in

Thank you for purchasing this Sanyo product.

Please read these instructions carefully before operating this

Product and retain them for future reference.

The images shown in this manual are for illustrative purposes only.

XT-55S8200U

Chapter 1: Introduction

Chapter 2:

Connections and Setup

Chapter 3: Using your TV

Chapter 4: Other Information

Use Environment ................................................................................................................................

Cleaning .............................................................................................................................................

Hanging the TV Set on the Wall ..........................................................................................................

................................................................................................................................

Standard accessories .......................................................................................................................

Optional accessories ...........................................................................................................................

Basic connection .................................................................................................................................

External Equipment.............................................................................................................................

Remote Control Functions .................................................................................................................

.............................................................................................................................. 10

Base Installation

Buttons on the TV

.......................................................................................................................................

Switching off .........................................................................................................................................

Initial Setup .............................................................................................................................................

Network Connection ...................................................................................................................................

System .................................................................................................................................................

Lock .....................................................................................................................................................

Option Menu .........................................................................................................................................

Home Page ............................................................................................................................................

Switching on

Accessing channels ..............................................................................................................................

Watching connected devices ................................................................................................................

Volume...................................................................................................................................................

Using Menu System...............................................................................................................................

TV..........................................................................................................................................................

Power connection and aerial...............................................................................................................

Picture....................................................................................................................................................

...................................................................................................................................................

Time .....................................................................................................................................................

Sound

Troubleshooting .................................................................................................................................

Safety Precautions .............................................................................................................................

Specifications ....................................................................................................................................

Table of Contents

Multimedia ............................................................................................................................................ 19

Table-top use / Wall Hanging

110 – 240 V ~ 50/60 Hz

When mounting the product on a wall or ceiling,

be sure to install the product according to the

method recommended by the manufacturer. This

is a safety feature.

When mounting the product on a wall or ceiling,

be sure to install the product according to the

method recommended by the manufacturer. This

is a safety feature.

Introduction

110 – 240 V ~

50/60 Hz

Sanyo service center

Cleaning

Clean the set by wiping the screen and the cabinet with

a soft, clean cloth or some special liquid cleaner.

Do not apply excessive force to the screen when

cleaning.

Do not use water or other chemical cleaner to clean the

screen as this may damage the surface of the TV

screen.

Do not place the set on an unstable cart, stand, or table.

Place the set on a place that allows good ventilation.

Do not use the set near damp, and cold areas. Protect

the set from overheating.

Keep the set away from direct sunlight.

Apparatus shall not be exposed to dripping or splashing

and no objects filled with liquids, such as vases, shall be

placed on the apparatus.

Do not use the set near dust place.

Use Environment

Hanging the TV Set on the Wall

Warning: This operation requires two people.

To ensure a safe installation, observe the following safety

notes:

Check that the wall can support the weight of the TV

set and wall mount assembly.

Follow the mounting instructions provided with the wall

mount.

The TV set must be installed on a vertical wall.

Make sure to use only screws suitable for the material

of the wall.

Make sure that the TV set cables are placed so that

there is no danger of tripping over them.

All other safety instructions about our TV sets are also

applicable here.

Note˖

Graphics contained within this operating

instructions are for presentation only.

WARNING:

The batteries shall not be exposed to excessive heat

such as sunshine, fire or the like.

Introduction

Base Installation

* Figures and illustrations in this User Manual are

provided for reference only and may differ from actual

may be changed without notice.

* To bring you better visual experience, please remove

all labels, if any, from TV front panel and screen before

use.

1.To fix the middle support on to the stand base, put it

as shown in the Dia A and fix the screws from bottom

side of stand base.

2.To fix the base lay your TV flat (screen down) on the

edge of a table or bench. Make sure to put down a soft

cushion or cloth so that your TV is not scratched. Refer

Dia B

Dia A

Dia B

AC cord

Battery

(AAA size, 2 pcs)

Screws

Rear of the TV

Introduction

Remote

Control

Pedestal

Accessories may not be placed all together. Take care not to throw them away unintentionally.

This product contains possibly dangerous parts (such as plastic bags), that can be breathed in or swallowed by

young children accidentally. Keep these parts out of reach of young children.

Operating

Instructions

Screws:M5x13(4EA)

Screws:ST4*25(4EA)

49”/55” class

12 mm

200mm

M6*12

Standard accessories

Optional accessories

Sanyo service center

Sanyo

Product page

(Ultra HD)

XT-49S8200U

LED TV

E-mail: [email protected]

Need help? Please Call at Toll Free No. 1800 419 5088

To obtain a more detailed Electronic Copy of this

Manual or much further contents,go to product page

at our website www.sanyoappliance.in

Thank you for purchasing this Sanyo product.

Please read these instructions carefully before operating this

Product and retain them for future reference.

The images shown in this manual are for illustrative purposes only.

XT-55S8200U

Introduction

1 DIGITAL AUDIO OUT

2 USB 2.0/3.0

3 LAN

4 HDMI 1/2/3

(P.8)

(P.6)

(P.8)

5 AV IN

6 AUDIO OUT

7 ANTENNA

8 HEADPHONE

1 2 3 4 5

(P.7)

(P.8)

(P.12)

(P.7)

Basic Connection

Terminals

Power connection and aerial

ANTENNA cable

110 – 240 V ~

50/60 Hz

Note

Aerial

Power Connection

Connect the TV’s power cable to a power outlet.

Do not place the RF cable under the TV.

7RREWDLQRSWLPXPTXDOLW\SLFWXUHDQGVRXQGDQDHULDOWKHFRUUHFWFDEOHȍFRD[LDODQGWKHFRUUHFWWHUPLQDWLQJ

plug are required.

If a communal aerial system is used, you may require the correct connection cable and plug between the wall aerial

socket and the TV.

Your Sanyo Service Centre or dealer may be able to assist you in obtaining the correct aerial system for

your particular area and the accessories required.

Any matters regarding aerial installation, upgrading of existing systems or accessories required, and the costs

incurred, are the responsibility of you, the Customer.

AC cord

LAN

HDMI 3

VIDEO

AV IN

DIGITAL AUDIO

OUT

5V

05A

HEADPHONE

HDMI 1

ANTENNA



09 A

HDMI 2

(SOUND OUT)

AUDIO OUT

AV Cable are often color-coded to

connectors. Connect yellow to yellow,

red to red, white to white.

HDMI cable

AV CABLE

HDMI3

USB 2.0

Introduction

Rear of the TV

VCR

Camcorder

Recorder / Player

Game console

Never remove the USB device or turn off the TV while using

the USB device.

External Equipment

USB devices

HDMI equipment

AV devices

These diagrams show our recommendations for connection of your TV to various pieces of equipment.

Check the type of terminals and cable plugs are correct when connecting.

Please also read the manual of the equipment being connected.

Keep the TV away from electronic equipment (video equipment, etc.) or equipment with an infrared sensor.

Otherwise, distortion of image / sound may occur or operation of other equipment may be interfered.

R L VIDEO

HDMI

(SOUND OUT)

2

Note: If your device has an HDMI connection, we recommend

you use that to get the best quality possible.

If the external device has a DVI output only, use a DVI to

HDMI adapter cable to connect to the HDMI terminal.

Note: For the audio receiver control Sound Out, firstly you must

have a device which supports HDMI Sound Out, then connect it

to the HDMI2 port. When the "Sound bar Setting" is enabled on

your TV, the TV set's speakers will mute automatically and the

audio will be outputted on your sound device system.

HDMI1

USB 3.0

- AUD IO - VIDE O

AV IN

The First inserted USB will be regarded as Device C as

default and Second inserted USB would be reflected

as Device D.

AUDIO Out cable

AUDIO OUT Cable are often color-coded to

connectors.Connect red to red, white to white.

Introduction

HEADPHONE

Rear of the TV

Recorder / Player

Rear of the TV

External Equipment

HEADPHONE

Headphone cable

R L

AUD IO OUT

Digital Audio Out cable

DIGITAL AUDIO

OUT

Introduction

Remote Control Functions

Most of your television's functions are available via the menus that appear on the

screen. The remote control supplied with your set can be used to navigate through

the menus and to configure all the general settings.

PICTURE

POWER

(MUTE) Reduces the TV's volume to its minimum level. Press again

to restore the volume.

MUTE

INPUT

RETURN

Displays the status information.

INFO

EXIT

SOUND

MEDIA PLAYER

OPTION

VOL +/-

Increases or decreases the TV's volume.

CH Scans up or down through the current channel list.

Goes to the USB menu.

Goes to the Netflix Home Page.

0-9

Opens the picture preset settings: Standard,Cinema,User,Game and Vivid.

(On/Off button) Turns the TV on or off.

Exit the menu and return to the previous menu.

Goes to the browser Home Page.

HOME

Goes to the smart TV Home Page.

Exits the menu system.

Brings up the menu system.

(up, down, left and right direction buttons) Highlights different items

in the menu system and adjusts the menu controls.

Confirms your selection.

Brings up the option menu .

(numeric buttons) Enters channel numbers.

Goes to the YouTube homepage.

when press

/ to select the desired option , then press

opens the Input source list

OK button to select.

Opens the sound modes: Standard,Cinema,Speech,Music and User.

In corresponding mode, press it to enter the right function as hint.

Green(G) button In corresponding mode, press it to enter the right function as hint.

Yellow(Y) button In corresponding mode, press it to enter the right function as hint.

In corresponding mode, press it to enter the right function as hint.

Blue(B) button

OFF TIMER

Selects the sleep timer.

Buttons on the TV

Take a certain model for an example:

Introduction

SUBTITLE

LIST

PRE-CH To return to the previous channel.

ASPECT

TEXT

Aspect Ratio : Selects the picture size Auto,16:9,4:3 and Just Scan.

Note:Some options may not be selectable for certain signal sources.

This key will function as pause in USB mode.

This key will function as play & pause in USB mode.

This key will function as stop in USB mode.

This key will function as backward play in USB.

This key will function as forward play in USB.

This key will function as previous song, video, picture in USB.

This key will function as next song, video, picture in USB.

Displays the channel list menu.

Not Supported.

Press Subbtitle

SUBTITLE

to choose subtitle language and AD Switch in DTV mode.

FAV

Brings up your favorite channel list.

1. /MENU button

Scans up/down through the channel list. In the menu system, they act like the up/down direction buttons on the

remote and adjust menu controls.

Note: The location and names of the function buttons and power button on the TV may vary according to TV model.

Increases/decreases the volume. In the menu system, they act like the right/left direction buttons on the

remote and adjust menu controls. (Note: In some menus, VOLUME UP also acts like the OK button on the remote.)

3. CHANNEL UP/DOWN button

2. VOLUME UP/DOWN button

Turns the TV on or standby. The TV is on, press it, bring up to the selection menu or press to return to the

previous menu.

VOL

Connections and Setup

Switching on

Follow the instructions on this page on how to switch on your TV set and

the remote control before going on to following pages describing how to

use the channel set-up procedure.

1. Insert two AAA batteries in the remote control.

Precautions on using batteries:

- Make sure you use the correct polarity.

- Do not mix new and used batteries.

- Do not use rechargeable batteries.

- Do not expose batteries to excessive heat

this could cause them to leak or explode.

- Remove the batteries from the remote control if you are not using it

for a long period of time.

2. Connect the power cable FIRST to the television, THEN to a mains

socket.

(Note: If the power cable is connected to the television, please only

connect the power cable to the mains socket.)

Your TV set should only be connected to an AC supply. It must not be

connected to a DC supply. If the plug is detached from the cable, do

not, under any circumstances, connect it to a mains socket, as there is

a risk of electric shock.

. The location of the power

socket of the television might differ depend on the model.

3. Connect an outside aerial to the ANTENNA/CABL

E IN socket at the

back of the TV set.

The aerial socket (75 OHM - VHF / UHF / cable) can be used for

Note: If you want to receive the ,xob elbac ro elbac ruoy morf langis

please connect a coaxial cable to the ANTENNA/CABLE IN socket at

the back of the TV set.

4. When powered on, the TV will be ybdnats ni eb ro yltcerid no denrut

mode.

If the power indicator lights up, the TV set is in standby mode. Press

the

button on the remote control or on the TV set to turn on the TV.

Switching off

To put the TV set into standby mode, press the button on the

remote control. The TV set remains powered up, but with low energy

consumption.

To switch off the TV set, unplug the mains socket from the mains outlet.

Connections and Setup

Network Connection

Your TV will require an internet connection to operate all functions. Data usage

charges may apply.

Please refer to your Internet Service Provider (ISP) for additional information.

To access the internet, you must subscribe high speed broadband internet service from your internet service

provider.

Your TV can be connected to your home network in two ways:

• Wired, using the RJ45 (LAN) connector on the back panel.

• Wireless, using the internal wireless to your home wireless network.

Note:! The! following! instructions! are! just! the! usual! ways! to! connect! your! TV! to! the! wired! or! wireless!

have!any!questions!about!your!home!network,!please!refer!to!your!ISP(Internet!Service!Provider).

Built-in wireless connection

Wireless Router

Modem

Router

Modem

Internet

Connecting to a wired network

To connect to a wired network:

1. Ensure you have:

• An ethernet cable long enough to reach your TV

• A router or modem with an available Ethernet port

• A high-speed internet connection

• An Ethernet (LAN) port on the back of the TV

2. Connect your ethernet cable to the router and to the

Ethernet port on the back of the TV.

3. Use the Network Settings

Connecting to a wireless network

To connect to a wireless network

1. Ensure you have:

•

A router broadcasting a high-speed wireless signal

•

A high-speed internet connection

2. Use the Network Settings

Note:

Some models may have no internal wireless module,

you can use wireless network by inserting external wireless

adapter into USB socket of the TV. Some external wireless

adapters can’t be compatible with the TV.

ESD regulation

This apparatus meets ESD performance criteria.

In case the apparatus does not recover in Ethernet

connection mode due to electrostatic discharge, user

interference is required.

Rear of the TV

LAN

Connections and Setup

Initial Setup

Initial setup involves selecting all the settings required

to be able to search for and store all the analogue

channels you can receive.

Make sure that the television is switched on and follow

Note:!If!the!channel! search! retrieved!only few

channels!it!could!be!caused!by!poor!broadcasting!

and! therefore! is! not! coverd! by! manufacturer

w a r r a n t y.! M a n u f a c t u r e r s c a n n o t ! b e ! h e l d!

responsible for lack of or poor broadcasting! in!

some!areas.

wizard opens, which guides you through the initial

setup process.

Step 1: Language

3UHVVŸźWRVHOHFW\RXUODQJXDJH3UHVVWRFRPILUP

and move to next step.

Step 3: Disclaimer

Step 1:

Step 2:

Step 4:

Step 5:

Note: Picture!menu!settings!will!not!be!accessible

when!you!select!Shop!Mode.!

Home Mode: You Would be able to view the standard

settings for Picture and sound modes.

Shop Mode: You can enjoy enhanced setting for Picture

and Sound modes.

Step 2: Location

3UHVVŸźWRVHOHFW\RXUORFDWLRQ7KHQSUHVVWR

enter next step.

ŸźUse to read

disclaimer,then press OK to comfirm

and move to next step.

Step 4: Network Type

3UHVVŸźWRVHOHFW\RXUQHWZRUNFRQQHFWLRQW\SH:LUHG

or wireless), then press OK to enter the next step.

Follow the guides on the screen and press the corresponding

buttons on the remote control to proceed.

Note:You!can!also!skip!this!step.For!details!please!

refer!to!section!Network!Connection.

Step 5: Time Zone

8VHŸźWo select your desired Time Zone,then press

OK to comfirm and move to next step.

Step 7: Channel Scan

8VHŸźWo select Scan,then press OK to comfirm and

move to next step.

Follow the guides on the screen and press the

corresponding buttons on the remote control to

proceed.

Note:!To! prevent the channel installation

process from!being interrupted,!wait! for! the! !

message!indicating!that!the!installation!is!

complete.!You!can! also! skip! this! step! by!

selecting "skip".In!this!case,!to!search!and!store!

you may do an automatic channel! search!by!

follwing! the! instructions! in! the! next section.

Inital Setup Language

Please select your language

English

Select OK

Inital Setup Location

Please select your Location

Home

Shop

Home mode is for at-home viewing.

Shop mode is for in-store display purposes.

Select OK

back

Step 3:

Inital Setup Disclaimer

Disclaimer

The contents and service(collectively the “Licensed Application”) made available to you through

this TV set (this “Device”) are licensed,not sold to you for use only under these terms and

conditions.The privuders of the Licensed Application (each and “Application Provider”)reserve all

rights not expressly granted to you.

1.Scope of License

The license granted to you for a Licensed Application by the relevant Application Provider is

limited to a non-transferable license to use the Licensed Application on the Device that you own or

control.You may not distribute or make the Licensed Application available over a network where it

could be used by multiple devises at the same time. You may not rent,lease,lend,sell,redistribute

or sublicense the Licensed Application.

I agree

Browse

Confirm

Back

Inital Setup Network Type

Setup

Select

Back

Please connect to your Internet.

If you skip this step, you can perform the network Setup later in the user menu.

Skip

Inital Setup Time Zone

GMT+6:00

Select

Back

Please select your time zone.

GMT+7:00

GMT+8:00

GMT+9:00

GMT+5:00

Inital Setup Tuner Type

Select

Back

Select your tuner type.

Step 6:

Inital Setup Channel Scan

Select

Back

Please scan live TV channels.

Scan

Step 7:

Step 6: Tuner Type

8VHŸźWo select DVBT+ATV or DVBC+ATV,then press

OK to comfirm and move to next step.

DVBT+ATV

DVBC+ATV

First,connect antenna cable if you skip this step,channel scan will be

performed in menu.

Skip

Tuner: Press OK to enter and use to choose

DVBT+ATV or DVBC+ATV.

Auto Tuning: Press OK to enter and use to choose

DVBT+ATV or DVBC+ATV.

DTV Manual Tuning: This allows you scan with a range

of channels.

Note:This function is only for digital channels.

1.Select TV > DTV Manual Tuning,and then press ok to

enter.

2.Press to select channel number.

3.Press OK to start channel scan.

4.Press MENU to return or EXIT to close the menu.

ATV Manual Tuning:This allows you scan with a range

of channels.Operation are similar to that of DTV Manual

Search.

Note:This function is only for analog channels.

Program Edit:

Select Channel > Channel Edit and press OK to display

Channel Edit menu.

3UHVVŸźWRVHOHFWWKHFKDQQHODV\RXUGHVLUHGWKHQ

press the RED button on the remote control to set your

favorite channel and the green button to skip the channel.

3.Press RETURN to return or EXIT to close the menu.

Signal Information:To show the Signal Information

in TV.

Software update(OAD):The function includes On and Off.

OAD SCAN:Press OK to enter in OAD Scan.

Country:The default mode is India.

Using your TV

Accessing channels

Using the numeric buttons: press the corresponding

numeric buttons on the remote control to access the

channels.

Using the buttons:press the buttons on

the remote control or the corresponding buttons on the

TV set to scroll through the channels.

Using the LIST buttons: press the LIST buttons on

the remote control to display the channel list and press

Ÿź

and OK to select channels.

Watching connected devices

Press I n p u t t h e n press

to select your

desired source, and then press OK

Volume

Volume control: press the VOL +/- buttons on the

remote control or the corresponding buttons on the TV

set to increase or decrease the volume.

Sound mute: press the

button to temporatily mute

the sound. Press this button again or the vol + button

to restore the sound.

CH /

Using Menu System

This section explores the system settings menu of your

TV. Each menu is outlined and detailed to help you get

the most from your TV. Please note that some function

might be unavailable in certain input source. To access

the menu system

1. Press MENU

on remote control to display the

main menu.

press OK to open the corresponding submenu or

activate a setting.

4. To return the previous menu, press RETURN.

To close the menu, press EXIT

Note: Figures and illustrations in this User Manual are

provided for reference only and may differ from actual

product appearance. And for some models, certain

options are not available.

TV, PICTURE,SOUND,TIME,

SYSTEM and LOCK.

Then press OK to enter the

submenu.

Select M E N U > TV,then the TV menu appears on

the screen with the following options. Press

Ÿź

to choose an option.

Ÿź

ATV DTV HDMI 1 HDMI 2 HDMI 3 AV USB

Tuner DVBT+ATV

Auto Tuning

DTV Manual Tuning

ATV Manual Tuning

Program Edit

Signal Information

Software update(OAD)

OAD SCAN

Country India

Using your TV

Picture

The menus for adjusting the picture are used to

obtain the best picture settings according to your

preference, the type of program you are watching

and the ambient lighting.

Picture mode: Press OK to enterDQGWKHQSUHVVŻŹ

picture mode:

Standard,Cinema,User,Game and Vivid.

Note:Picture Mode may be automatically set to User if

you make any adjustment to the following picture options.

Content Type:Press OKWRHQWHUDQGWKHQSUHVVŸźWR

select Video,PC and Game.

ECO Setting:Press OK to select On or Off.

Color Temperature: Adjusts the color temperature of the

picture. Press Ÿźto select the color settings:

Cool for a more blue palette of picture colors;Normal

and Warm for a more red palette of picture colors.

MFC:Press OK to enter, and press ŸźWRVHOHFW2II

Low,Middle,High.

Aspect Ratio:Press OK to enter, and press ŸźWR

scroll through the picture mode settings:Auto,4:3,

16:9,Just Scan.

Noise Reduction:

Improves the quality of the picture in

the case of poor reception. Press Ÿźto select off,Low,

Middle,High,Auto.

Dynamic Contrast Enhancement:Press OK to enter and

press

ŸźWRVHOHFW2II2Q

Sound

This menu allows you to adjust each option to obtain the

best sound settings to optimize audio output.

Press MENU to display the main menu and select

Sound, then press OK

Sound options

are as follows:

Sound mode: Press OK to enterDQGWKHQSUHVVŻŹ

to choose

Standard,Cinema,Speech,Music and User.

Balance:3UHVVŻŹWREDODQFHWKHVRXQGEHWZHHQWKH

left and right speakers.

Auto Volume

:Press OK to select On or Off.

SPDIF Mode:Press OK to select PCM,Auto or Off.

Audio Delay:

This option is used to synchronize the sound

with the If the sound is slower/quicker than the action of

WKHSLFWXUH\RXFDQSUHVVŻŹWRWXUQGRZQXSWKH

numerical value.

Audio Type:Press OK to select Normal or Visual Impaired.

AD Switch:

Press OK to enterDQGWKHQSUHVVŻŹ

to choose On or Off.

Primary Audio Language:Press

ŸźŻŹ to choose

your desired Primary Audio Language.

Secondary Audio Language:Press

ŸźŻŹ to choose

your desired Secondary Audio Language.

Picture Mode Standard

Content Type

ECO Setting

Color Temperature

MFC

Aspect Ratio

Noise Reduction

Dynamic Contrast Enhancement

PICTURE

Sound Mode Standard

Balance

Auto Volume

SPDIF Mode

Audio Delay

Audio Type

AD Switch

Primary Audio Language

Secondary Audio Language

SOUND

Using your TV

Time

Press MENU key of remote to select TIME menu,

appears on the screen with the follow options. Press

Ÿźto choose an option.

Auto Sync: Press OK to choose On/Off.

Clock:Press OK to enter in time and date set menu.Use

ŸźWRVHOHFWZKLFKLWHPZLOOEHVHWDQGXVHŻŹWRVHW

the item you select.After setting,press menu to save and

return.

Off time:The function include Off,Once,Every Day.If you

select Once or Daily,then use ŸźDQGŻŹWRVHWRII

time just as the clock setting menu.

Sleep Timer: Use ŸźWRVHOHFW2II0LQ0LQ0LQ

60Min,90Min,120Min,180Min and 240Min.

Time Zone:3UHVVŸźŻŹWRVHOHFWWKHORFDO]RQHDV

you want to choose.

Note: Time option will not be memorized when turning

on the TV next time,and the TV’s time will start from the

default.

Menu language:The default mode is English.

Location:Sets the location of your TV. Press OK to select

Home or Shop.

- Home Mode: You Would be able to view the standand

settings for Picture and Sound Modes.

- Shop Mode:You can enjoy enhanced setting for Picture

and Sound Modes.

Note:Picture menu settings will not be accessible

when you select Shop Mode.

Press MENU key to select System

menu,appears on

the screen with the follow options. Press

Ÿźto choose

an option.

System

Auto Sync On

Clock 06:02

Off Time

Sleep Timer

Time Zone

TIME

SYSTEM

Menu Language English

Location

Restore Factory Default

HDMI 2.0

Network Configuration

Soundbar Ready

Software Upgrade

Netflix Setting

Primary Subtitle Language

Secondary Subtitle Language

Subtitle Hearing Impaired

TTX Language

Restore Factory Default:Press OK to display the Lock

menu.Use the numeric buttons to enter the password.

Select Yes to restore all the settings to factory defaults,

or select No to return to the previous menu.

Note:The default passwortd“0000”.And “0812” is the

super password.If you forget your password,enter it

to override any existing ones.

HDMI 2.0:The function include On and Off.

Note:Only available in HDMI mode.

Network Configuration:The function include wired and

Wireless Your TV set supports both Wired and Wireless to

access the Internet.

Soundbar Ready(SOUND OUT):The function include

On and Off.

Software Upgrate:The function include Software Version,

USB upgrade and Network upgrade.

- Software Version:You can check the Software Version in

this function.

- USB upgrade:Enables you to install the latest version

of the software from your USB ports if available.Select

USB upgrade and press OK to enter.Follow the on-screen

instructions to continue your installation.

- Network upgrade:Enables you to download and install

the latest software version from the Internet.Make sure to

set up a wired or wireless network connection first, then

select By network and press OK to enter. Follow the

on-screen instructions to continue. When new-version

software is available, a progress bar appears. When the

download finishes,the TV will go black and upgrade the

software.(Note: Do not switch off or unplug the TV until the

upgrade is completed. Keep successful network connection

during upgrade.)

Netflix Setting: In Netfiix Setting menu,Netflix Deactivation

can deactivate your device form Netflix.

Primary Subtitle Language:

Press ŸźŻŹ to choose

your desired

Primary Subtitle Language.

Secondary Subtitle Language:Press ŸźŻŹ to choose

your desired

Secondary Subtitle Language.

Subtitle Hearing Impaired:The function include On and Off.

TTX Language:The options include:Russian,East,Arabic,

Farsi and West.

Using your TV

This function allows you to effectively stop anyone without

the correct password from watching TV. When you select

the Lock System is On, the menu is changed, the options

include Set Password,Block Program,Parental Guidance.

Set Password: sets a new password for operating TV.

The default password is “0000”.

Block Program:Lock the program you set.

Parental Guidance: limits the age watching TV. Options

include Off,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18.

Note: It is only available in digital mode.

LOCK

Press MENU to display main menu and select LOCK then

press OK to confirm.

Press Ÿźto choose an option.

LOCK

Lock System

Set Password

Block Program

Parental Guidance

OPTION Menu

Press OPTION Key of remote to select available OPTION

Menu.

Wireless Display Enjoy Music Sleep Timer Soundbar Ready Sport Mode WIFI

Wireless Display:Mirror your android device onto your

Smart TV screen in high definition along with audio Steps

1. Go to your cast function/option

2. Search for TV_****

3. Enjoy the seamless experience

Note:- Wireless display creates its own Wi-Fi range, thus

it will disconnect from your home Wi-Fi. After exiting the

app please give your Smart TV few seconds to again

automatically connect to your home Wi-Fi.

- Some of smart phone versions are not supported due

to different technology platforms.

Enjoy Music:Select this option to enter into Audio Only

mode.

Sleep Timer:The options inlude:

Off,10Min,20Min,30Min,

60Min,90Min,120Min,180Min and 240Min.

Soundbar Ready(SOUND OUT):Press OK to select

On or Off.

Note:For the audio receiver control Sound Out,firstly you

must have a device which supports HDMI Sound Out,then

connect it to the HDMI2 port.When the Sound bar Setting

is enabled on your TV,the TV set’s speakers will mute

automatically and the audio will out putted on your sound

device system.

Sport Mode:Press OK to select On or Off.

NOTE:When you select sport mode on,then Picture and

Sound menu will not be accessible.

WIFI:Press OK to select On or Off.

HOME Page

Press “Home” key on the remote control to enter

into Home Page.

Source: If you select this icon and press OK key on

the remote, it will show the list of input source. You

can select and enter into the source you want to enter.

Option: Press this icon to open the Option menu.

This Option menu includes features like Wireless

display, Enjoy Music, Sleep timer, Soundbar ready,

Sports Mode.You can select and Press OK key of

remote to use this options.

App Store: You can select and Press OK to enter

into App store. This will allows you to enjoy internet

Applications for your TV.

Netflix: Press this icon to enter into Netflix application.

Netflix is a streaming service that allows user to watch

a wide variety of award-winning TV shows, movies,

documentaries and many more.

You Tube: Press this icon to enter into You Tube

application. Browse this application to watch a wide

variety of online videos.

Hungama:Bollywood Hungama is India's premier

Hindi movie portal that provides Bollywood news,

movies, songs, videos and wallpaper.

YUPPTV:Yupptv is TV show aggregator.Subscription

is required to use this APP.

Browser: Press this icon to enter into Brower

application. This will allows you to browse the web

pages you like.

Note:- If current page is not fully opened then please

allow progress to complete the loading.Some pages &

websites may not be compatible with due to unsupported

plug-in.We recommend a good high speed internet

connection for better accessing of websites, watching

Videos & more.

- Some web pages & websites may not be compatible

with browser. For Ex. Login to popular web sites, credit

card payments, etc

Eros Now:Press this icon to enter into Eros Now

application.

Source Option

Using your TV

Wireless Display: Mirror your android device onto your

Smart TV screen in high definition along with audio Steps

1. Go to your cast function/option

2. Search for TV_****

3. Enjoy the seamless experience

Note:- Wireless display creates its own Wi-Fi range, thus

it will disconnect from your home Wi-Fi. After exiting the

app please give your Smart TV few seconds to again

automatically connect to your home Wi-Fi.

- Some of smart phone versions are not supported due

to different technology platforms.

GoLive TV: Press this icon to enter into GoLive TV

application. Golive TV is a live HD online cloud service

that offers its excellent copyrighted content including a

large amount of HD live TV shows and many more.

Note:Change in applications may be made without

prior notice to the customer.

•

!!According! to! circumstances of the content

provider, ! an! a pplication's! upda tes! or! the!

application!itself!may!be!discontinued.

•

!!Depending on!your!country's!regulations,!some!

applications!may!have limited!service!or!not!be!

supported.

• !!Changes! in! application!content may be made

without!prior!notice!by!the!service!provider.

WARNING:

Configure!the!network!settings!before!using

Smart!TV!applications.

Slow!responses!and/or!interruptions!may!occur,

depending!on!your!network!conditions.

If!you!experience!a!problem!using!an!application,

please!contact!the!content!provider.

Using your TV

Multimedia

Connect a USB device to a USB socket and press MEDIA

PLAYER key on remote to enter USB input mode.

You can also select USB input by selecting input AV button.

In USB state, if no USB device connected, the USB

interface will be displayed.

My Picture:

1. Select Picture icon, then press OK button to view the

picture.

2. Press Up, Down, Left or Right direction button to select

your desired picture file and press OK to show.

3. While showing picture, press Menu key of remote to display

the play console. For the Play console, Left or Right direction

button to select an icon, then press OK button to confirm.

4. The Play console includes Play/Pause, Previous,Next,Rotate,

Zoom,Volume,Pictrue,BGM,Repeat and Return.

For Previous and Next use remote left and Right key.

My Movie :

1. Select Movie icon, then press OK button to view movie

file.

2. Press Up, Down, Left or Right direction button to select

your desired file and press OK to Play.

3. While playing a Video, press OK Menu of remote to display

the play console. For the Play console, Press Ok key of remote

to Play and Pause the video file.

4. The Play console includes Play/Pause, Fast Backward,

Fast Forward,Previous,Next,Mode,Picture,Zoom,Info,Volume,

Sound and Return.Use Left key of remote to Fast Backward,

Right key of remote to Fast forward.

5. Press Return key of remote to Stop playing and Press Return

to Exit.

My Music :

1. Select Music icon, then press OK button to listen to Music.

2. Press Up, Down, Left or Right direction button to select your

desired file and press OK to Play.

3. The Play console includes Play/Pause, Fast Backward,

Fast Forward,Previous,Next,Sound,Mode,Info,Return.

4. Press Return key of remote to Stop playing.

1. Under the following conditions, this system cannot

decode the file and the file cannot be play normally:

-The parameters of file, such as the pixel of picture,

code rate of audio and video file, sampling rate of

audio file, exceed the limit of the system;

-The format of file is not matched or the file is harmed.

Note: The code rate of this system does not support

exceed 20Mbps.

2. Hot plug: Do not disconnect when the system is

reading or transmitting data, avoid damaging the

system or the device.

3. Pay attention to the power supply of the device when

you are using a mobile hard disk or a digital camera.

If the power supply is not sufficient or not stable, you

may encounter problems during operating or can not

operate at all. In this case, please restart the device,

or unplug the device and plug it again, and ensure that

its power supply is normal.

Notes:

4. The system supports standard USB1.1,USB2.0 and

USB3.0 devices, such as standard U-disks, MP3

players,mobile hard disks, etc..

5. For obtaining better audio and video quality, It is

suggested to use the external device which accords

with USB2.0/USB3.0 standard.

6. When playing the video with high compression ratio,

these phenomenons, such as picture standstill and

menu long time response, are normal.

7. For some USB device with power supply, such as large

size hard disk, MP4, etc., Suggests using it with power

to avoid electric power shortage. The parameters of

file, such as the pixel of picture, code rate of audio and

video file, sampling rate of audio file, exceed the limit

of the system.

Using your TV

Supported file format in Media Player:

ideo :

ideo codec

esoluƟon Bit Rate

roĮůe Container

PEG1/2

1080

P@30fps 40Mbps

P@HL MPEG program stream (.DAT, .VOB, .MPEG)

MP4 (.mp4, .mov)

AVI (.avi)

MKV (.mkv)

PEG4

1080

P@30fps 40Mbps

Simple ProĮle

Advanced Simple ProĮůe@Level 5

GMC is not support

MPEG program stream ( .MPG , .MPEG)

MP4 (.mp4, .mov)

AVI (.avi)

MKV (.mkv)

.263

1080

P@30fps 40Mbps

MP4 (.mp4, .mov)

AVI (.avi)

MKV (.mkv)

.264

1080

P@30fps 62.5Mbps

Main ProĮůe

High ProĮůe@Level 4.2

MP4 (.mp4, .mov)

AVI (.avi)

MKV (.mkv)

1080

P@30fps 40Mbps

Advanced ProĮle@Level 3

Simple ProĮle

Main ProĮůe

MPEG program stream (.MPG, .MPEG)

AVI (.avi)

MKV (.mkv)

udio :

udio codec

ample rate Channel

it Rate Container

PEG1/2

ayer1

KHz~48KHz Up to 2

Kbps~448Kbps Music:

MP3 (.mp3)

PEG1/2

ayer2

KHz~48KHz Up to 2

Kbps~384Kbps Music:

MP3 (.mp3)

PEG1/2

ayer3

KHz~48KHz Up to 2

Kbps~320Kbps Music:

MP3 (.mp3)

MP4 (.mp4)

C-LC

kHz~ 48KHz Up to 5.1

Music:

AAC(.aac)

MP4(.mp4)

hoto :

.jpg, .jpeg, .bmp, .png.

AC3

32KHZ,44.4KHZ,

48KHZ

Up to 5.1

32Kbps~640Kbps Music:

AC3(.ac3)

MP4(.m4a)

Page is loading ...

Sanyo XT-55S8200U Owner's manual

Brand: Sanyo

Model: XT-55S8200U

Category: LCD TVs

Type: Owner's manual

This manual is also suitable for

XT-49S8200U

Download PDF

report

Sanyo XT-55S8200U Owner's manual

This manual is also suitable for

Sanyo XT-55S8200U Owner's manual

Related papers

Other documents