bioBidet BB-i3000 User manual

Category
Sanitary ware
Type
User manual

The bioBidet BB-i3000 is an innovative bidet offering a variety of features for a comfortable and hygienic personal cleansing experience. With its posterior and feminine wash functions, it provides a gentle and targeted cleaning. The device allows for precise water pressure adjustment for both functions, ensuring a personalized experience. Additionally, the enema function offers a unique cleansing option, promoting overall well-being. The self-cleaning nozzle ensures optimal hygiene, while the adjustable water temperature adds to the comfort and convenience of use.

The bioBidet BB-i3000 is an innovative bidet offering a variety of features for a comfortable and hygienic personal cleansing experience. With its posterior and feminine wash functions, it provides a gentle and targeted cleaning. The device allows for precise water pressure adjustment for both functions, ensuring a personalized experience. Additionally, the enema function offers a unique cleansing option, promoting overall well-being. The self-cleaning nozzle ensures optimal hygiene, while the adjustable water temperature adds to the comfort and convenience of use.

•This unit is specially manufactured for household use.
•Please read all operating instructions before installation.
Notes :
1. This product should be installed according to this manual’s directions.
2. Please keep this manual for future reference.
3. Please register the attached Warranty upon purchase of bidet.
4. Observe all precautions as noted on this manual.
BB3000.09 2013.3.26 3:7 PM 페이지1 mac001 JETPDF 2540DPI 175LPI
BB3000.09 2013.3.26 3:7 PM 페이지2 mac001 JETPDF 2540DPI 175LPI
IMPORTANT INFORMATION
IDENTIFICATION
GENERAL PRECAUTIONS
OPERATION
INSTALLATION
MAINTENANCE
TROUBLE SHOOTING
CHARACTERISTICS
WARRANTY
WARRANTY REGISTRATION
-------
-------
-------
-------
-------
-------
-------
-------
-------
-------
4
8
9
10
12
14
15
15
16
17
Contents
Properly installed and maintained, your new bidet should
provide years of optimal operations.
Read this manual before installation.
BB3000.09 2013.3.26 3:7 PM 페이지3 mac001 JETPDF 2540DPI 175LPI
IMPORTANT INFORMATION
4
The following terms are used to indicate
varying levels of precautions:
indicates a potentially hazardous situation which,
if not avoided, may result in serious injury
indicates a potentially hazardous situation which,
if not avoided, may result in minor or moderate
injury or damage to the product or other property.
WARNING
CAUTION
BB3000.09 2013.3.26 3:7 PM 페이지4 mac001 JETPDF 2540DPI 175LPI
IMPORTANT INFORMATION
5
WARNING
Keep out of the direct sunlight
and flammable objects.
Low-temperature burn
Usually, a burn or a scald is caused as a result of the skin coming in contact with
something very hot such as fire, boiling water, hot oil, etc. However, even
contact with something of a relatively low temperature (104F-140F) may cause
a low-temperature burn if it is in contact with the skin for an extended period
of time. If there is someone of delicate physical condition, you are requsted to
advice him/her to take the above-mentioned precaution.
Do not disassemble the unit.
It will expire remaining warranty.
BB3000.09 2013.3.26 3:7 PM 페이지5 mac001 JETPDF 2540DPI 175LPI
6
CAUTION
Do not use chemicals.
Use only damp cloth or neutral
detergent to clean.
Take all possible safety precautions
when phsically challenged person,
elderly, or child is using the unit.
a insecticide
a benzene
alcohol
a detergent
Do not step on the unit.Do not slam or apply excessive force
on the unit.
IMPORTANT INFORMATION
BB3000.09 2013.3.26 3:7 PM 페이지6 mac001 JETPDF 2540DPI 175LPI
7
CAUTION
Do not push or pull connection
tube.
** Water Temperature **
The human skin may be scalded when high-temperature water
comes into contact with it. Close supervision is necessary when the
user is unstable or a child.
When using the always ensure the usage of water with
lower temperatures when bidet is used by:
* Children
* An unstable or sick person
* A person with particularly sensitive skin
* Physically handicapped person
Do not splash water or waste water
directly to the unit.
IMPORTANT INFORMATION
BB3000.09 2013.3.26 3:7 PM 페이지7 mac001 JETPDF 2540DPI 175LPI
Operation lever
(Posterior,enema
& Feminine wash
Nozzle cleaning
button
Cold water inlet
Hot water inlet
Water Temperature
Adjustable Lever
Seat
Feminine Wash
Nozzle
Warning Label
Seat Lid
Posterior wash &
enema funtion
nozzle
IDENTIFICATION
8
Mild soap or
douche reservoir for
feminine cleaning
BB3000.09 2013.3.26 3:7 PM 페이지8 mac001 JETPDF 2540DPI 175LPI
1. Water supply should have a water pressure between
2.0 - 7.5kgf/㎠ (28.4psi~ 106.7psi.)
2. Only connect to clean water pipe.
3. Take the protective measures to prevent from freezing.
4. Do not expose to direct sunlight, as it may discolor the plastic.
5. Do not push or pull the connecting tubes, it may cause water leakage.
6. Do not apply excessive force to the shower nozzle.
9
IDENTIFICATION
GENERAL PRECAUTIONS
Simply Guide
Manual
Fill valve water supply hose
Water Supply tubing
(4m)
3/8”T-Valve
(2 pc)
Cone PackingsMounting Bolts
Bolt Guides Nuts
BB3000.09 2013.3.26 3:7 PM 페이지9 mac001 JETPDF 2540DPI 175LPI
10
-Simply sit on the unit, and select posterior/
enema funtion by pulling the lever
backward gradually.
♣Water Pressure Adjustment &
Enema Function.
-The water pressure can be manually adjusted to
5 levels.
-To activate the enema function, slowly increase the
water pressure by adjusting the level till the washing
water enters the rectum.
-Adjust your body to allow the water to easily enter
your body.
-Once the water fills the rectum, strain your abdomen
to eliminate waste matter from your system.
This action may be repeated 3 or 4 times.
Stop
Posterior
wash
♣Posterior Washing & Enema function.
OPERATION
on putting into
on pushing out
BB3000.09 2013.3.26 3:7 PM 페이지10 mac001 JETPDF 2540DPI 175LPI
-For the feminine wash, slowly push the
lever forward
(away from you).
-Water temperature is adjustable to desired
temperature as illustrated.
-Simply push self-cleaning button before and
after using the unit for maximum hygiene.
Stop
Feminine
wash
♣Feminine Washing.
♣Warm water adjustment
(when applicable).
♣Nozzle cleaning function
11
OPERATION
Cold
H
o
t
BB3000.09 2013.3.26 3:7 PM 페이지11 mac001 JETPDF 2540DPI 175LPI
1
Close water supply shut off valve.
Removing the existing seat and lid.
-Remove existing seat and lid
2
12
INSTALLATION
BB3000.09 2013.3.26 3:7 PM 페이지12 mac001 JETPDF 2540DPI 175LPI
3
Connecting the T-Valve (Cold Water / Hot Water)
1. Flush out remaining water in water tank
2. Removing existing fill valve water supply hose.
3. Install supplied T-valve.
4. Connect “Cold”/ “Hot”water suppy tube.
5.
Connect supplied fill valve water supply hose.
(7/8”× 3/8”)
Tip:
Do not over tighten supplied parts when installing.
Use only hand pressure initially,
then tighten it gradually as checking for leakage.
13
INSTALLATION
Packing Rubber
(Black)
BB3000.09 2013.3.26 3:7 PM 페이지13 mac001 JETPDF 2540DPI 175LPI
14
INSTALLATION
Connect both hot and cold water supply tube to
water inlet on bidet seat.
5
4
Installing .
1. Place mounting bolts into mounting
brackets and slide into the mounting
bracket guide rail on the bottom of
the main unit.
2. Securely fasten cone packing
from bottom to secure the unit to toilet.
1
2
BB3000.09 2013.3.26 3:8 PM 페이지14 mac001 JETPDF 2540DPI 175LPI
15
MAINTAINANCE
Cleaning the nozzle
- Pull out the nozzle and clean the nozzle with toothbrush.
- After cleaning the nozzle, push the nozzle-cleaning
button on the operation lever to activate the
self-cleaning function.
*** CAUTIONS***
BB3000.09 2013.3.26 3:8 PM 페이지15 mac001 JETPDF 2540DPI 175LPI
16
TROUBLE SHOOTING
Problem
The washing water is not
spraying properly
Remedy Remarks
1.Check water supply valve.
2.Clean the nozzle.
♣Before calling the service (A/S) center,
please perform the following checks.
There is no hot water pipe
below the wash basin
Connect from another hot water
supplying source.
Water leaking or dripping
Check the connection and
securely fasten if loose.
If leakage is from inside of the
main unit, shut water off immediately,
and contact service center.
Centralized rotary bubble water streams are made as
water stream from 1 central nozzle and
6 circumferential water streams get together.
(U.S Patent No. US 6526602 B2, Korean Patent No. 0426635 )
 Enema Function spraying system.
 Korean Medical appliance production lisence :
No. 1617 Certified by KOREAN FDA
 Qualification : ISO 9001 &
ISO 14001 Certified.
ISO9001 ISO14001
CHARACTERISTICS & CERTIFICATE
BB3000.09 2013.3.26 3:8 PM 페이지16 mac001 JETPDF 2540DPI 175LPI
This limited warranty gives you specific legal rights, and you may also have
other rights that may very from state to state or according to other conditions.
The Manufacturer,
BBC Innovation Corporation
will warrant to the original retail
buyer only, which fails in normal use and within the applicable periods specified below,
following the terms of this warranty.
BBC Innovation Corporation
replacement will
be warranted to the original purchaser of the products.
General Limited Warranty Covered
Limited Warranty
BBC Innovation Corporation
17
WARRANTY
If the parts fail within 12 month after original installation following the installation
manual and normal operation,
BBC Innovation Corporation
will furnish a
replacement part(s).
The Parts Warranty
1. Defects and/or malfunctions from failure to properly install, operate and/or maintain
the unit in accordance with the installation manual.
2. Damage from abuse, fire, flood, freeze, and any other act of God.
3. Damage resulting from unauthorized alterations, attachments and/or repairs.
4. If the product was not installed properly to residential water closets.
5. Damage from installing the unit in an environment with animals, mice or insects.
6. Damage caused by excess moisture or from water clogging the water closet.
7. Damage from not being installed in accordance with all applicable local codes,
ordinances and good trade practices.
8. Color fading due to use in wrong environments.
9. Damage from consumable chemicals.
10. The warranty will not be covered without providing the date of purchase with
original receipts.
11. Damage from misuse due to not following the installation manual.
Will not be Covered by this Warranty
BB3000.09 2013.3.26 3:8 PM 페이지17 mac001 JETPDF 2540DPI 175LPI
18
WARRANTY REGISTRATION
1 Year Warranty
The Manufacturer carefully tests every Bio Bidet before shipment.
Bio Bidet made with highest quality materials in the highest standard
of production and workmanship and guaranteed to be free of defects.
The warranty is good for one year from purchase date.
Only the original purchaser may submit a claim under this limited warranty.
Retain copy of purchase receipt for warranty
Service Center
205 Berg Street, Algonquin, IL 60102, U.S.A
Questions or Service inquiry, call to free
847.458.2334
BB3000.09 2013.3.26 3:8 PM 페이지18 mac001 JETPDF 2540DPI 175LPI
BB3000.09 2013.3.26 3:8 PM 페이지19 mac001 JETPDF 2540DPI 175LPI
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20

bioBidet BB-i3000 User manual

Category
Sanitary ware
Type
User manual

The bioBidet BB-i3000 is an innovative bidet offering a variety of features for a comfortable and hygienic personal cleansing experience. With its posterior and feminine wash functions, it provides a gentle and targeted cleaning. The device allows for precise water pressure adjustment for both functions, ensuring a personalized experience. Additionally, the enema function offers a unique cleansing option, promoting overall well-being. The self-cleaning nozzle ensures optimal hygiene, while the adjustable water temperature adds to the comfort and convenience of use.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI