Eizo FDX1501 Owner's manual

Type
Owner's manual

This manual is also suitable for

日本語
English Deutsch Français
中文
重要 ご使用前必ず取扱説明書(CD-ROM内
お読みお使いプマは大切
保管
SetupManual
Important: PleasereadthisSetupManualandtheUser’sManualstored(ontheCD-
ROM)carefullytofamiliarizeyourselfwithsafeandeffectiveusage.Please
retainthismanualforfuturereference.
Installationshandbuch
Wichtig: LesenSiediesesHandbuchzurEinrichtungunddasBenutzerhandbuch
(aufderCD-ROM)aufmerksamdurch,umsichmitdersicherenund
efzientenBedienungvertrautzumachen.BewahrenSiediesesHandbuch
zumspäterenNachschlagenauf.
Manueld’installation
Important: VeuillezlireattentivementceManueld’installationetleManueld’utilisation
(inclussurleCD-ROM)andevousfamiliariseravecceproduitetde
l’utiliserefcacementetentoutesécurité.Veuillezconservercemanuel
pourréférenceultérieure.
设定手册
重要事项: 请仔细阅读本设定手册和用户手册(储存在光盘上),以便掌握如何安全、
有效地使用本产品。请保留本手册,以备日后参考。
1
English
SAFETYSYMBOLS
This manual and this product use the safety symbols below. They denote critical information. Please read them
carefully.
WARNING
Failure to abide by the information in a WARNING may result in serious injury and can be life
threatening.
CAUTION
Failure to abide by the information in a CAUTION may result in moderate injury and/or property
or product damage.
Indicates an attention to be required.
Indicates a prohibited action.
CompatibleResolutions
The monitor supports the following resolutions.
AnalogInput(D-Sub)
Resolution ApplicableSignals
VerticalScan
Frequency
DotClock
640×400 NECPC-9801,PC-9821AP2 upto70Hz
80MHz
(Max.)
640×480 VGA,VESA upto75Hz
720×400 VGATEXT 70Hz
800×600 VESA upto75Hz
1024×768
*
VESA upto75Hz
DigitalInput(DVI-D)
Resolution ApplicableSignals
VerticalScan
Frequency
DotClock
640×480 VGA 60Hz
65MHz
(Max.)
720×400 VGATEXT 70Hz
800×600 VESA 60Hz
1024×768
*
VESA 60Hz
A graphics board in conformance with VESA standard is required.
*
Recommended resolution
AboutSetupManualandUser’sManual
SetupManual
(this manual)
Describes basic information ranging from installation of the
monitor to using the monitor.
UsersManualof
thismonitor
*
Describes the application information of the monitor such as
screen adjustments, settings, and specications.
UsersManualof
TouchPanelDriver
*
Describes the installation and use of the touch panel driver.
*
PDF le on the CD-ROM (Installation of Adobe Reader is required.)
No part of this manual may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means,
electronic, mechanical, or otherwise, without the prior written permission of EIZO Corporation.
EIZO Corporation is under no obligation to hold any submitted material or information condential unless prior
arrangements are made pursuant to EIZO Corporations receipt of said information. Although every effort has been
made to ensure that this manual provides up-to-date information, please note that EIZO monitor specications are
subject to change without notice.
2
PRECAUTIONS
IMPORTANT
• This product is intended to be used with an industrial device designed to build industrial systems.
- Transportation systems (Ship, aircraft, train, automobile, etc.)
- Safety devices (Disaster prevention system, security control system, etc.)
- Equipment with direct effect on human life (Life support systems, Medical equipment or devices used in the
operating room, etc.)
- Nuclear energy control devices (Nuclear energy control systems, security control systems of nuclear facilities,
etc.)
- Main line devices (Operation control for transportation, control systems specic to aircrafts, etc.)
• To ensure personal safety and proper maintenance, please read this section.
WARNING
Thisproductisintendedtobehousedinanenclosure.Donotusethebaremonitor
separately.
Attempting to use a malfunctioning unit may result in electric shock, or equipment damage.
Iftheunitbeginstoemitsmoke,smellslikesomethingisburning,ormakesstrange
noises,disconnectallpowerconnectionsimmediatelyandcontactyourdealerforadvice.
Attempting to use a malfunctioning unit may result in re, electric shock, or equipment damage.
Donotopenthecabinetormodifytheunit.
Opening the cabinet or modifying the unit may result in re, electric shock, or burn.
Referallservicingtoqualiedservicepersonnel.
Do not attempt to service this product yourself as opening or removing covers may result in re, electric
shock, or equipment damage.
Keepsmallobjectsorliquidsawayfromtheunit.
Small objects accidentally falling through the ventilation slots into the cabinet or spillage into the cabinet
may result in re, electric shock, or equipment damage. If an object or liquid falls/spills into the cabinet,
unplug the unit immediately. Have the unit checked by a qualied service engineer before using it again.
Usetheunitinanappropriatelocation.
Not doing so may result in re, electric shock, or equipment damage.
• Do not place outdoors.
• Do not place in a transportation system (ship, aircraft, train, automobile, etc.) where it may be affected
by strong vibration or shock.
• Do not place in a dusty or humid environment.
• Do not place in a location where water is splashed on the screen (bathroom, kitchen, etc.).
• Do not place in a location where the steam comes directly on the screen.
• Do not place near heat generating devices or a humidier
• Do not place in a location where the product is subject to direct sunlight.
• Do not place in an inammable gas environment.
DonottouchadamagedLCDpaneldirectlywithbarehands.
The liquid crystal that may leak from the panel is poisonous if it enters the eyes or mouth. If any part
of the skin or body comes in direct contact with the panel, please wash thoroughly. If some physical
symptoms result, please consult your doctor.
3
English
CAUTION
Handlewithcarewhencarryingtheunit.
Disconnect the power cord and cables when moving the unit. Moving the unit with the cord attached is
dangerous. It may result in injury.
Donotinstalltheunitinaclosedspace.
If the inerior becomes hot, it may result in re, electric shock or damage.
4
PackageContents
Checkthatallthefollowingitemsareincludedinthepackagingbox.Ifanyitemsaremissingordamaged,contact
yourlocaldealer.
Note
Please keep the packaging box and materials for future movement or transport of the monitor.
• Monitor
• Analogsignalcable:MD-C87
• USBcable:MD-C93(forFDX1501Tonly)
• EIZOLCDUtilityDisk(CD-ROM)
• SetupManual(thismanual)
• ForUsersofTouchPanelLCDMonitor”
(forFDX1501Tonly)
• Clamper2pcs.
• ScrewsforxingtheclamperM4×12:2pcs.
• VESAmountingscrewsM4×12:4pcs.
• Metalpanelttings:8pcs.(Panelmounttypeonly)
(Prepareascrewdriver.)
ControlsandFunctions
10
11
7 8 9
51 2 3 4 6
Top
Bottom
Attachingtheclamper
• FDX1501T
Ex:Connectedto
powerjack
Adjustmentmenu
(ScreenManager
*
)
Example:FDX1501T(Chassismounttype)
1. button/ button Usedwith tosetthemonitor(keylockandDDC/CIcommunication).
Thesebuttonsdonotfunctionbythemselves.
2.
button Switchesinputsignalsfordisplay.
3.
button DisplaystheAdjustmentmenu,determinesanitemonthemenuscreen,and
savesvaluesadjusted.
4.
 button • Choosesandincreases/decreasesadjustmentsettingsforadvanced
adjustmentusingtheAdjustmentmenu.
• Displaysthebrightnessadjustmentmenu.(Press
or toadjustbrightness.)
5.
button Turnsthepoweronoroff.
6. Powerindicator Indicatesthemonitor’soperationstatus.
Blue:OperatingOrange:PowersavingmodeOFF:Poweroff
7. USBport(UP)
(forFDX1501Tonly)
ConnectsaUSBcablewhenthisproductisusedasatouchpanelmonitor.
8. Inputsignalconnector Left:D-Submini15-pinconnector/Right:DVI-Dconnector
9. Powerconnector Left:DCpowerterminalblock/Right:Powerjack(DC-IN)
10. Buttonextensionconnector Thisisanextensionconnectorforusingtheexternalcontrolbuttons.
11. Screwholesforsecuring
theclamper(2)
Attachtheclampertopreventthecablefromfallingoff.
Fitthecableintheclamperandtitwiththesetscrew(M4×12),asshownin
thediagramabove.
*
ScreenManagerisanEIZO’snicknameoftheAdjustmentmenu.ForhowtouseScreenManager,refertotheMonitor
User’sManual(ontheCD-ROM).
5
English
Assembly
Attention
Before mounting the monitor into the enclosure, please perform all settings and adjustments of the monitor, and
installation of the touch panel driver.
Chassismounttype
Exteriorview
FDX1501
63 (2.48)
174 (6.9)
73.7 (2.90)
Display area
Display area
343 (13.5)
7.2 (0.28)
7.2 (0.28)
303 (11.9)
20 (0.79)
20 (0.79)
63 (2.48) 1 (0.04)
33 (1.3)
357.4 (14.1)
273.4 (10.8)
304.1 (12.0)
228.1 (9.0)
348.2 ± 1 (13.7 ± 0.04)
100 (3.9)
24 (0.94)
104.1 (4.1)
100 (3.9)
127 (5.0)
100 (3.9)
9.7 (0.38)
18 (0.71)
64.7 (2.55)
129.5 (5.1)
18 (0.71)
144
± 0.5
(5.7
± 0.02
)
4.5×6 (0.18×0.24)
D-Sub mini 15-pin connector
Power jack (DC-IN)
DC power terminal block
(Power specifications: see *1 in the next page)
DVI-D connector
M4 (VESA
mounting holes)
M4 (Screw holes for
securing the clamper)
Button extension connector
(Connector specifications: see *2 in the next page)
(Enclosure mounting holes)
FDX1501T
307.2
(12.1)
231.2
(9.1)
343 (13.5)
7.2 (0.28)
7.2 (0.28)
303 (11.9)
20 (0.79)
20 (0.79)
63 (2.48)
1 (0.04)
31 (1.22)
357.4 (14.1)
26.2 (1.03)
26.2 (1.03)
273.4 (10.8)
22.2
(0.87)
22.2
(0.87)
304.1 (12.0)
229 (9.0)
305 (12.0)
Display area
228.1 (9.0)
174 (6.9)
63 (2.48)
73.7 (2.90)
127 (5.0)
100 (3.9)
104.1 (4.1) 100 (3.9)
64.7 (2.55)
144
± 0.5
(5.7
± 0.02
)
18 (0.71)
9.7 (0.38)
18 (0.71)
129.5 (5.1)
348.2 ± 1 (13.7 ± 0.04)
100 (3.9)
24 (0.94)
Display area
4.5×6 (0.18×0.24)
D-Sub mini 15-pin connector
Power jack (DC-IN)
DC power terminal block
(Power specifications: see *1 in the next page)
DVI-D connectorUSB port (UP)
M4 (VESA
mounting holes)
M4 (Screw holes for
securing the clamper)
Button extension connector
(Connector specifications: see *2 in the next page)
(Enclosure mounting holes)
Dimension available for touch panel input
Dimension available for touch panel input
unit : mm (inch)
unit : mm (inch)
6
*1
DCpowerterminalblock
ConnectorPinAssignment Powersequencing
PinNo. Signal
1 DC12V
2 DET
*
3 Ground
*
Notconnected
*2
Buttonextensionconnector:S3B-PH-SM4-TB(LF)(SN)(JST)
ConnectorPinAssignment
PinNo. Signal
1 KEY0
2 KEY1
3 Ground
Howtoassemble
1. Fasten the screws through the enclosure mounting holes of the monitor (2 each on the left and right sides)
into the enclosure.
Attention
Please prepare screws that have a diameter of 3 mm and are suitable for use with the enclosure.
(Screws are not included with the monitor.)
7
English
Panelmounttype
Exteriorview
FDX1501
unit : mm (inch)
307.2 (12.1)37.9 (1.49) 37.9 (1.49)
383 (15.1)
42.9 (1.69)
231.2 (9.1)
56.9 (2.24)
331 (13.0)
21.8 (0.86) 339.4 (13.4)
21.8 (0.86)
303 (11.9)
63
(2.48)
158.5 (6.2)172.5 (6.8)
287.3 (11.3)
273.2 (10.8)
174 (6.9)
87.6 (3.45)
21.9 (0.86)
104.1 (4.1) 100 (3.9)
129.5 (5.1)
9.7 (0.38)
162.8 (6.4)
289
±
0.5 (11.4
±
0.02)
100 (3.9) 68.2 (2.69)
341
±
0.5 (13.4
±
0.02)
141.5 (5.6) 100 (3.9) 141.5 (5.6)
24 (0.94)
1 (0.04)
32 (1.26)
18.2 (0.72)18.2 (0.72)
MAX.22 (0.87)
MAX.22 (0.87)
MAX.22
(0.87)
MAX.22
(0.87)
Panel opening dimensions
Panel opening dimensions
6
(0.24)
M4 (Screw holes for
securing the clamper)
Button extension connector
(Connector specifications: see *2 in the next page)
D-Sub mini 15-pin connector
Power Jack (DC-IN)
DC power terminal block
(Power specifications: see *1 in the next page)
DVI-D connector
M4 (VESA mounting holes)
FDX1501T
unit : mm (inch)
307.2 (12.1)37.9 (1.49) 37.9 (1.49)
383 (15.1)
42.9 (1.69)
231.2 (9.1)
56.9 (2.24)
331 (13.0)
21.8 (0.86) 339.4 (13.4)
21.8 (0.86)
303 (11.9)
63
(2.48)
158.5 (6.2)172.5 (6.8)
287.3 (11.3)
273.2 (10.8)
174 (6.9)
87.6 (3.45)
21.9 (0.86)
104.1 (4.1) 100 (3.9)
129.5 (5.1)
9.7 (0.38)
162.8 (6.4)
289
±
0.5 (11.4
±
0.02)
100 (3.9) 68.2 (2.69)
341
±
0.5 (13.4
±
0.02)
141.5 (5.6) 100 (3.9) 141.5 (5.6)
24 (0.94)
1 (0.04)
32 (1.26)
18.2 (0.72)18.2 (0.72)
MAX.22 (0.87)
MAX.22 (0.87)
MAX.22
(0.87)
MAX.22
(0.87)
Panel opening dimensions
Panel opening dimensions
6
(0.24)
D-Sub mini 15-pin connector
Power Jack (DC-IN)
DC power terminal block
(Power specifications: see *1 in the next page)
DVI-D connectorUSB port (UP)
M4 (VESA mounting holes)
M4 (Screw holes for
securing the clamper)
Button extension connector
(Connector specifications: see *2 in the next page)
8
*1
DCpowerterminalblock
ConnectorPinAssignment Powersequencing
PinNo. Signal
1 DC12V
2 DET
*
3 Ground
*
Notconnected
*2
Buttonextensionconnector:S3B-PH-SM4-TB(LF)(SN)(JST)
ConnectorPinAssignment
PinNo. Signal
1 KEY0
2 KEY1
3 Ground
Howtoassemble
Attention
• Since the panel mounted on the monitor is tightened with a metal panel tting screw, please make the
selection considering the following points.
- Flat
- A thickness of 5 mm
- A structure having the strength to support xing with the screw.
1. Insert the monitor into the mount opening of the panel from the front.
The dimensions of a tting opening are the “Panel opening dimensions” shown in the exterior view.
Mount opening (Panel opening dimensions):
341±0.5mm × 289±0.5mm
9
English
2. Fit the included metal panel ttings onto the monitor (8 locations).
Metal panel fitting
3. Tighten the screws of the metal panel ttings with a prescribed torque of 0.6-0.7 N·m.
10
DisplayingtheScreen
1.
Press toturnonthemonitor.
The monitor’s power indicator lights up blue.
2.
TurnonthePC.
The screen image appears.
If an image does not appear, refer to “No picture” (page 11) for additional advice.
If using the FDX1501T proceed with installation and calibration of the touch panel driver.
Attention
Turn off the monitor and PC after using them.
For the maximum power saving, it is recommended that the Power button be turned off. Unplugging the power cord
completely shuts off power supply to the monitor.
InstallingtheTouchPanelDriver(FDX1501T)
Attention
The user account to be used for installing the touch panel driver must have the “Administrators” privilege.
When reinstalling the touch panel driver to update the driver, etc., restart the PC after uninstalling the driver and then
install it.
1.
Uninstalltheothertouchpaneldriver,ifitisinstalled.
2.
InstallthetouchpaneldriveraccordingtotheinstructionsincludedintheCD-
ROM.
For how to install the touch panel driver, see the Touch Panel Driver User’s Manual (on the CD-ROM).
3.
UsetheUSBcable(MD-C93)toconnectthemonitorandthePC.
USB
4.
RestartthePC.
CalibratingtheMonitor(FDX1501T)
Calibrate the monitor according to the Touch Panel Driver User’s Manual (on the CD-ROM).
Connectors
onthePC
Connectors
onthemonitor
USBCableMD-C93(supplied)
11
English
Troubleshooting
Nopicture
If a problem still remains after applying the suggested remedies, contact your local dealer.
Problem Possiblecauseandremedy
1. Nopicture
• Powerindicatordoesnotlight.
• Checkwhetherthepowercordisconnected
properly.
• Press
.
• Powerindicatorislightingblue. • Increase<Brightness>,<Contrast>,and/or<Gain>
intheAdjustmentmenu.
• Powerindicatorislightingorange. • Switchtheinputsignal.
• Operatethemouseorkeyboard.
• CheckwhetherthePCisturnedon.
2. Themessagebelowappears. Thismessageappearswhenthesignalisnotinput
correctlyevenwhenthemonitorfunctionsproperly.
• Thismessageappearswhennosignalis
input.
Example:
• Themessageshownleftmayappear,because
somePCsdonotoutputthesignalsoonafter
power-on.
• CheckwhetherthePCisturnedon.
• Checkwhetherthesignalcableisconnected
properly.
• Switchtheinputsignal.
• Themessageshowsthattheinputsignalisout
ofthespeciedfrequencyrange.(Suchsignal
frequencyisdisplayedinred.)
Example:
fD: Dotclock
(Displayedonlyduringdigitalsignalinput)
fH: Horizontalscanfrequency
fV: Verticalscanfrequency
• CheckwhetherthePCisconguredtomeetthe
resolutionandverticalscanfrequencyrequirements
ofthemonitor(“CompatibleResolutions”inthe
SetupManual.).
• RebootthePC.
• Selectanappropriatedisplaymodeusingthe
graphicsboard’sutility.Refertothemanualofthe
graphicsboardfordetails.
Note
If there is a problem with the image displayed or with the touch panel, refer to the Monitor User’s Manual (on the CD-
ROM).
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58

Eizo FDX1501 Owner's manual

Type
Owner's manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI