Page 2 For technical questions, please call 1-800-444-3353. SKU 94185
cooled, check all connections for
gas leaks.
Turn off after every use. Allow 10.
Pencil Torch to cool completely
before storing.
Do not store any ammable 11.
liquids or materials in area
surrounding Pencil Torch or work
area.
Store Pencil Torch in a dry, safe 12.
location out of reach of children.
Maintain product labels and 13.
nameplates. These carry
important safety information. If
unreadable or missing, contact
Harbor Freight Tools for a
replacement.
OPERATION
Read the ENTIRE
IMPORTANT SAFETY
INFORMATION section
at the beginning of this
document including all
text under subheadings
therein before set up or
use of this product.
Note: Torch is supplied empty for
safety reasons.
Rotate the Brass Valve 1.
counterclockwise fully to the
OFF position.
Turn the torch so that the ll port 2.
is on top. Add butane fuel to the
ll port. Only use butane fuel
with this product! The Torch
will ll with fuel in about ve
seconds.
Wipe off any spilled fuel with a 3.
cloth, put away the butane fuel,
and allow the butane fuel inside
the torch to stabilize for about 5
minutes before operating.
To light Pencil Torch, tilt the tip 4.
upward slightly, but away from
your face and any ammable
objects, and turn the Brass Valve
clockwise to “ON”. Listen for the
sound of owing gas.
Be careful to keep ngers
away from the path of the
ame. Move a lit match ame to
the tip to ignite the Torch. Once
lit, the size of the ame can be
adjusted by rotating the Brass
Valve.
To turn off, rotate the Brass 5.
Valve counterclockwise fully to
the OFF position.
When done using this product, 6.
allow it to completely cool down,
and store it in a safe location that
is out of reach of children.
Note: Replacement parts are not
available for this item. Discard
and do not use if leaking,
damaged, parts are missing.
Brass
Valve
Fill Port
(in bottom)
TipCylinder