Pittsburgh Automotive Item 38386 Owner's manual

Brand: Pittsburgh Automotive

Model: Item 38386

Type: Owner's manual

This manual is also suitable for

WINDOW/DOOR TOOL SET

4 PIECE

38386

ASSEMBLY & OPERATING INSTRUCTIONS

Visit our website at: http://www.harborfreight.com

Read this material before using this product.

Failure to do so can result in serious injury.

SAVE THIS MANUAL.

2004 by Harbor Freight Tools

contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight

Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual

product may differ slightly from the product described herein. Tools required for assembly and service may not

be included.

For technical questions or replacement parts, please call 1-800-444-3353.

MODEL # 38386 SPECIFICATIONS

PRODUCT FEATURES

1. These tools are ideal for installing and removing auto door and window trim,

 moldings,handlesandsimilarttings.

2. Heavy duty steel construction is good for years of use.

3. Specially designed tools make easy work of removing and installing specialty

fasteners used in auto door, molding, and window trim and handles.

SAVE THIS MANUAL

You will need this manual for the safety warnings and cautions, assembly instructions,

operating procedures, maintenance procedures, trouble shooting, parts list, and diagram.

Keep your invoice with this manual. Write the invoice number on the inside of the front

cover. Keep both this manual and your invoice in a safe, dry place for future reference.

Page 2 SKU # 38386

NOTICE

The Warnings, Cautions, and Instructions discussed in this instruction manual

cannot cover all possible conditions and situations that may occur. It must be

understood by the operator that common sense and caution are factors which

cannot be built into this product, but must be supplied by the operator.

MODEL # 38386

INCLUDED TOOLS

3-IN-1 SPRING CLIP REMOVER

AUTO TRIM PAD REMOVER

WINDSHIELD MOLDING CLIP TOOL

DOOR & WINDOW HANDLE CLIP REMOVER

NET WEIGHT 0.7 LBS.

SAFETY WARNING & CAUTIONS

READ ALL INSTRUCTIONS BEFORE USING THIS TOOL!

1. KEEP WORK AREA CLEAN. Cluttered areas invite injuries. Do not use tools in damp,

wet, or poorly lit locations. Don’t expose to rain. Keep work area well lit.

2. KEEP CHILDREN AWAY. Children must never be allowed in the work area. Do not let

them handle machines, tools, or equipment.

3. STORE IDLE EQUIPMENT. When not in use, tools must be locked up in a dry location to

inhibit rust. Always lock up tools and keep out of reach of children.

4. DO NOT FORCE THE TOOL. It will do the job better and more safely at the rate for

which it was intended. Do not use inappropriate attachments in an attempt to exceed the

tool’s capacities.

5. USE THE RIGHT TOOL FOR THE JOB. Do not use a tool for a purpose for which it was

not intended.

6. DRESS PROPERLY Do not wear loose clothing or jewelry, as they can be caught in

moving parts. Non-skid footwear is recommended. Wear restrictive hair covering to contain

long hair. Always wear appropriate work clothing.

7. DO NOT OVERREACH. Keep proper footing and balance at all times. Do not reach over

or across running machines.

8. MAINTAIN TOOLS WITH CARE. Keep tools maintained and clean for better and safer

performance.

SPECIAL WARNINGS WHEN USING THESE TOOLS

1. Wear appropriate work gloves and safety shoes when handling this tool and heavy

items.

2. Do not allow this clamp to gouge your own or a co-worker’s hands or face.

Page 3 SKU # 38386

PLEASE READ THE FOLLOWING CAREFULLY

THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS DIAGRAM IN THIS

MANUAL AS A REFERENCE TOOL ONLY: NEITHER THE MANUFACTURER NOR DISTRIBUTOR

MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE

IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT OR THAT HE OR SHE IS QUALIFIED TO

REPLACE ANY PARTS OF THE PRODUCT: IN FACT THE MANUFACTURER A ND/OR DISTRIBUTOR

EXPRESSLY STATES THATALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN

BY CERTIFIED AND LICENSED TECHNICIANS AND NOT BY THE BUYER. THE BUYER ASSUMES

ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT

OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF

REPLACEMENT PARTS THERETO.

Page 4 SKU # 38386

MODEL # 38386 WINDOW / DOOR TOOL SET - 4 PIECE

Part # Description

1 Door & Window Handle Clip Remover

2 Auto Trim Pad Removal Tool

3 Windshield Molding Clip Tool

4 3 in 1 Clip Spring Remover

Pittsburgh Automotive Item 38386 Owner's manual

Brand: Pittsburgh Automotive

Model: Item 38386

Type: Owner's manual

This manual is also suitable for

Download PDF

report

Pittsburgh Automotive Item 38386 Owner's manual

This manual is also suitable for

Pittsburgh Automotive Item 38386 Owner's manual

Related papers

Other documents